|
| 1 | CHAIR DINING (FD- 279) |
| 2 | Removing of old existing unsv back leg of chair in any position, S&F new back leg made out of hard wood (teak) with nails of appropriate size. Rest complete all as shown on drawing and as specified. |
| 3 | All as 2.0 above but front leg |
| 4 | All as 2.0 above but side rail |
| 5 | All as 2.0 above front/ back rail |
| 6 | All as 2.0 above but stiffner |
| 7 | All as 2.0 above but back strip |
| 8 | Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg complete all as shown on drawing and as specified. (Make of cane shall be Aryan/Shah/Binny/Premier) |
| 9 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 10 | CHAIR DINING Offrs with Cushion (FD/E6/MAP-II/04) |
| 11 | S&F new tapestry cloth with rails all as specified in drg including removal of old existing unsv tapestry cloth of chair complete all as shown on drawing and as specified. |
| 12 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of hard wood (teak) with nails of appropriate size. Rest complete all as shown on drawing and as specified. |
| 13 | All as 12.0 above but front leg |
| 14 | All as 12.0 above but side rail |
| 15 | All as 12.0 above front/ back rail |
| 16 | All as 12.0 above but stiffner |
| 17 | All as 12.0 above but back strip |
| 18 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 19 | CHAIR DINING JCO/Ors (FD/MAP-II/05) |
| 20 | S&F new PVC seat 4mm thick with holes screwed with rails all as specified in drg including removal of old existing unsv PVC seat of chair complete all as shown on drawing and as specified. |
| 21 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of hard wood (teak) with nails of appropriate size. Rest complete all as shown on drawing and as specified. |
| 22 | All as 21.0 above but front leg |
| 23 | All as 21.0 above but side rail |
| 24 | All as 21.0 above front/ back rail |
| 25 | All as 21.0 above but stiffner |
| 26 | All as 21.0 above but back strip |
| 27 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 28 | CHAIR WOODEN BOTTOM W/O ARMS (FD-285) |
| 29 | M&L for removal of old existing unsv plywood seat as existing of chair in any position, S&F new BWR grade plywood seat of appropriate size complete all as shown on drawing and as specified. |
| 30 | M & L for replacement of back leg made of hard wood (teak) |
| 31 | All as 29.0 above but front leg |
| 32 | All as 29.0 above but side rail |
| 33 | All as 29.0 above but front/ back rail |
| 34 | All as 29.0 above but wooden back strip |
| 35 | All as 29.0 above but stiffener |
| 36 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 37 | CHAIR WRITING (FD-280 ) |
| 38 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of hard wood (teak) all as shown on drg, complete all as shown on drawing and as specified. |
| 39 | All as 38.0 above but front leg |
| 40 | All as 38.0 above but side rail |
| 41 | All as 38.0 above but front or back rail |
| 42 | All as 38.0 above but back strip |
| 43 | All as 38.0 above but arm rest |
| 44 | All as 38.0 above but stiffner |
| 45 | Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg complete all as shown on drawing and as specified. (Make of cane shall be Aryan/Shah/Binny/Premier) |
| 46 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 47 | CHAIR EASY (FD-229 ) |
| 48 | M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of hard wood (teak) all as shown on drg, complete all as shown on drawing and as specified. |
| 49 | All as 48.0 above but front leg |
| 50 | All as 48.0 above but side rail of seat frame |
| 51 | All as 48.0 above but front or back rail of seat frame |
| 52 | All as 48.0 above but side rail of back frame |
| 53 | All as 48.0 above but top or bottom rail of back frame |
| 54 | All as per item No 48.0 above but replacement of arm rest |
| 55 | Removing of old unsv cane and re-canning of chair dining with 2 mm cane as per mat Pattern of superior quality cane of width & thickness complete all as shown on drawing and as specified. (Make of cane shall be Aryan/Shah/Binny/Premier) |
| 56 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 57 | SOFA SET 05 SEATER WITH CUSHION (FD-281/373/ 258) |
| 58 | M & L for removing old unsv front leg and S&F of new front leg made of hard wood (teak) as per existing shape and size complete all as shown on drawing and as specified. |
| 59 | All as 58.0 but Rear Legs. |
| 60 | All as 58.0 but Side Rails. |
| 61 | All as 58.0 but Front Rails for Large three seater. |
| 62 | All as 58.0 but Back Rails for Large three seater . |
| 63 | All as 58.0 but Front Rails for Single seater. |
| 64 | All as 58.0 but Back Rail for Single Seater. |
| 65 | All as 58.0 but Arm Rests. |
| 66 | All as 58.0 but Teak Wood Batten for Seat and Back |
| 67 | Supply of Cushion of size 21'x22'x4' Foam 40 Density 100mm thick (Make : Sleepwell/Kurl-on Goldline /Featherfoam with Cushion cover of superior quality duly Stiched as per direction of Engr-in-charge/GE . Quality of tapestry Cloth shall be as per sample kept at GE office . Colour of tapestry cloth complete all as shown on drawing and as specified. |
| 68 | PEG TABLE (FD-277/384) |
| 69 | Taking down old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board with 04 mm Teakwood beading all around complete all as shown on drawing and as specified. |
| 70 | All as 69.0 above but leg made of hard wood |
| 71 | All as 69.0 above but long top rail |
| 72 | All as 69.0 above but short/bottom rail |
| 73 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 74 | TEAPOY (FD-278, FD-382) |
| 75 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board with 04 mm Teakwood beading all around it complete all as shown on drawing and as specified. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 76 | All as 75.0 above but leg made of hard wood(teak) |
| 77 | All as 75.0 above but long rail |
| 78 | All as 75.0 above but short rail |
| 79 | All as 75.0 above but stiffner |
| 80 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing and as specified. |
| 81 | TABLE DINING 1200 x 900mm (FD- 273/FD/MAP-II/03) |
| 82 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade prelaminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining complete all as shown on drawing and as specified. |
| 83 | All as 82.0 above but new leg made of hard wood |
| 84 | All as 82.0 above but long rail |
| 85 | All as 82.0 above but short rail |
| 86 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as shown on drawing and as specified. |
| 87 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 88 | TABLE DINING 6 PERSONS (FD- 273/FD/MAP-II/03) |
| 89 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading all around it for Table dining 6 persons complete all as shown on drawing and as specified. |
| 90 | All as 89.0 above but new leg made of hard wood |
| 91 | All as 89.0 above but long rail |
| 92 | All as 89.0 above but short rail |
| 93 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as shown on drawing and as specified. |
| 94 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing and as specified. |
| 95 | TABLE DINING 8 PERSONS (FD-273/FD/MAP/II/03) |
| 96 | Removing of old existing unsv top from table dining and S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board (Make : Green panel max/ Century/Archid ply/Kit ply) with 04mm thick teak wood beading all-around the top of side board complete all as shown on drawing and as specified. |
| 97 | All as 96.0 above but S&F new leg made of hard wood |
| 98 | All as 96.0 above but long rail for Table Dinging 8 Person |
| 99 | All as 96.0 above but short rail |
| 100 | All as 96.0 above but support stiffner |
| 101 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as shown on drawing and as specified. |
| 102 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 103 | TABLE 900 x 600 MM WITHOUT DRAWER (FD-284) |
| 104 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood) with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 105 | All as 104.0 above but leg made out of hard wood |
| 106 | All as 104.0 above but long rail |
| 107 | All as 104.0 above but short rail |
| 108 | All as 104.0 above but stiffner |
| 109 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drawing and as specified. |
| 110 | TABLE 900 x 600 MM WITH DRAWER (FD-283) |
| 111 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 112 | All as 111.0 above but leg made out of hard wood |
| 113 | All as 111.0 above but long rail |
| 114 | All as 111.0 above but short rail |
| 115 | All as 111.0 above but stiffner |
| 116 | Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood complete all as shown on drawing and as specified. |
| 117 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 118 | TABLE 900 x 900 (3'x3') (FD-228/291) |
| 119 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 120 | All as 119.0 above but leg made out of hard wood |
| 121 | All as 119.0 above but rail |
| 122 | S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as shown on drawing and as specified. |
| 123 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 124 | TABLE CENTRE (FD-235/274) |
| 125 | Taking down old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading all around it complete all as shown on drawing and as specified. |
| 126 | All as 125.0 above but leg made out of hard wood |
| 127 | All as 125.0 above but long rail |
| 128 | All as 125.0 above but short rail |
| 129 | All as 125.0 above but stiffener |
| 130 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg . Rest complete all as shown on drawing and as specified. |
| 131 | TABLE BED SIDE (FD-276) |
| 132 | S&F new back Ply for table bed side of 6 mm ply BWR grade IS:303 as per drg, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 133 | S&F new shelf for table bed side with 12 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 134 | S&F new side for table bed side with 18mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 135 | S&F new top/base for table bed sidewith 18 mm thick prelaminated MDF board as per drg. 4mm teakwood beading duly french polished shall be provide to open edges, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 136 | TABLE OFFICE CLERK (DB-4120) |
| 137 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/Kitply). with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 138 | All as 137.0 above but leg made out of hard wood |
| 139 | All as 137.0 above but long rail |
| 140 | All as 137.0 above but short rail |
| 141 | All as 137.0 above but stiffner |
| 142 | Taking down old existing unsv drawer of table in any position, S&F new drawer with Knob fittings made out of 1st class hard wood complete all as shown on drawing and as specified. |
| 143 | Taking down old existing unsv lock of table in any position & S&F new lock 50mm long, 04 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) complete all as shown on drawing and as specified. |
| 144 | TABLE WRITING (FD-275) |
| 145 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 146 | All as 145.0 above but leg made out of hard wood |
| 147 | All as 145.0 above but long rail |
| 148 | All as 145.0 above but top/bottom short rail |
| 149 | All as 145.0 above but stiffner |
| 150 | Taking down old existing unsv drawers with knobs of table in any position & S&F new drawers with knobs made of 1st class hard wood (teak) complete all as shown on drawing and as specified. |
| 151 | Taking down old existing unsv Locker/Cabinet door with complete fittings of table in any position & S&F new Locker/Cabinet door with complete fittings including knob in shade complete all as shown on drawing and as specified. |
| 152 | Taking down old existing unsv sides of side locker of table in any position & S&F new sides of side locker made out of 18/19mm thick exterior grade pre laminated MDF board complete all as shown on drawing and as specified. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 153 | Taking down old existing unsv shelf of side locker of table in any position & S&F new shelf of side locker made out of 12 mm thick exterior grade pre laminated MDF board complete all as shown on drawing and as specified. (Make:- Green panel max/ Century/ Archid Ply/National Plywood). |
| 154 | Taking down old existing unsv back of side locker of table in any position & S&F new back of side locker made out of 6mm thick commercial BWR grade plywood (Make : Kitply Century/ Archid Ply/National Plywood) complete all as shown on drawing and as specified. |
| 155 | Taking down old existing unsv lock of table in any position & S&F new lock 50mm long, 04 lever with two keys ( Make - Godrej/Harrison/Link/Plaza) to cabinet of table complete all as shown on drawing and as specified. |
| 156 | Removing of old UNSV PVC/ rubber shoe and S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg complete all as shown on drawing and as specified. |
| 157 | TABLE DRESSING LADIES WITH MIRROR (FD-251) |
| 158 | S&F new looking mirror of size 1220 x 366 x 5mm thick shall be fixed to the frame of teak wood and polishing complete in all respect to fix on wall as shown in drawing and including taking down old unserviceable one complete all as shown on drawing and as specified. Make:- Modi-guard/Saint-Gobain/Swastik |
| 159 | S&F new 25mm size CP knob as per shape and size as shown in drawing and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 160 | S&F new 05mm thick sheet glass with plastic handle for shutter as per sample, shape and size as shown in drawing and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 161 | S&F new legs of hard wood teak as per shape and size shown in drawing including french polishing to match the other parts and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 162 | S&F new sunmica from the top , sides and front of table dressing ladies 1.6 mm thick teakfaced sunmica of best quality fixed with adhesive as per shape and size as shown in drawing and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 163 | S&F new sunmica to the drawer and shelf of table dressing ladies 1.6 mm thick sunmica of best quality fixed with fevicoal as per shape and as shown in drawing and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 164 | TABLE DRESSING GENTS WITH MIRROR (FD-230/279) |
| 165 | S&F new looking mirror to table dressing gents , of size 760 x 380 x 5mm thick shall be fixed to the frame of teak wood and polishing, all as shown on drawing, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. Make: Modi-guard/ Saint-Gobain/ Swastik |
| 166 | S&F new 1.6 mm thick sunmica of table dressing gents of best quality fixed with fevicoal adhesive as per shape and size shown in drawing, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 167 | S&F new drawer of table dressing gents with 1.6 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 168 | S&F new 25mm size CP knob for table dressing gents as per sample, shape and size shown in drawing, complete, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 169 | BED HARD (FD-213, 245,246) |
| 170 | Removing of old unsv plytop from bed hard and S&F New ply wood top of 12 mm thick Commercial BWR Grade IS:303 (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).complete as per existing shape ,size and as per Drg complete all as shown on drawing and as specified. |
| 171 | All as 170.01 above but long rails of teak wood |
| 172 | All as 170.01 above but short rails |
| 173 | All as 170.01 above but stiffner |
| 174 | All as 170.01 above but leg |
| 175 | Removing of old unsv veener ply from Head wing board and S & F of new 4mm thick thck face veener ply (Make : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold) complete as per existing shape ,size and as per Drg complete all as shown on drawing and as specified. |
| 176 | Removing of old unsv veener ply from Foot wing board and S & F of new 4mm thick thck face veener ply (Make : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold) complete as per existing shape ,size and as per Drg complete all as shown on drawing and as specified. |
| 177 | Bin Linen Multipurpose (FD/E6/MAP-II/07) |
| 178 | Removing of old existing unsv top from bin linen and S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board(Make : Green panel max/ Century/Archid ply/Kitply) with 04mm thick teak wood beading all-around the top of side board complete all as shown on drawing and as specified. |
| 179 | All as per srl item No 178.0 here-in-before but door of bin linen with continues piano type hinges. |
| 180 | All as per srl item No 178.0 here-in-before but side of bin linen. |
| 181 | Removing of old existing unsv back ply of bin linen and supply and fixing the new back ply of same size of 06mm thick commercial plywood (ISI marked),BWR grade complete all as shown on drawing and as specified. (Make - Greenply/Kitply/Century) |
| 182 | Replacement of old existing unsv drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-lamianted particle board teak faced Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish complete all as shown on drawing and as specified. |
| 183 | Removing of old existing unsv lock and S&F of new lock 50mm, 4 lever ( Make - Godrej/Link/Plaza) as per size and design shown on drg complete all as shown on drawing and as specified. |
| 184 | Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to bin linen as per size and design shown on drg complete all as shown on drawing and as specified. |
| 185 | Removing of old existing unsv handle from the bin linen and supply and fixing new handle as per sample ,shape complete all as shown on drawing and as specified. |
| 186 | Removing of old existing unsv legs from bin linen and supply and fixing new hard wood teak leg of bin linen all as shown on drawing and as directed. |
| 187 | SIDE BOARD (FD-241/ 372) |
| 188 | Removing of old existing unsv top from Side board and S&F new top made out of 18/19mm thick exterior grade pre-laminated MDF board(Make : Green panel max/ Century/Archid ply/Kitply) with 04mm thick teak wood beading all-around the top of side board complete all as shown on drawing and as specified. |
| 189 | All as per srl item No 188.0 here-in-before but door of side board with piano type hinges. |
| 190 | All as per srl item No 188.0 here-in-before but side of side board. |
| 191 | Removing of old existing unsv back ply of side board and supply and fixing the new back ply of same size of 06mm thick commercial plywood (ISI marked),BWR grade all as complete all as shown on drawing and as specified. (Make - Greenply/Kitply/Century) |
| 192 | Replacement of old existing unsv drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick exterior grade pre-lamianted particle board teak faced Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish complete all as shown on drawing and as specified. |
| 193 | Removing of old existing unsv lock and S&F of new lock 50mm, 4 lever ( Make - Godrej/Link/Plaza) as per size and design shown on drg complete all as specified and directed. |
| 194 | Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to side board as per size and design shown on drg complete all as specified and directed. |
| 195 | Removing of old existing unsv knob from the side board and supply and fixing new knob as per sample ,shape and size all as per drawing and as directed. |
| 196 | Removing of old existing unsv legs from Side board and supply and fixing new hard wood teak leg of side board all as shown on drawing and as directed. |
| 197 | BOOK CASE/BOOK CASE WITH SLIDING GLASS SHUTTER (FD-237) |
| 198 | Removing of old existing unsv top from Book Case and supply and fixing new top made out of 18/19mm thick commercial pre-laminated MDF board exterior grade (Make : Green panel max/ Century/Archid ply/Kitply). with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. |
| 199 | All as per srl item No 198.0 here-in-before but shelf. |
| 200 | All as per srl item No 198.0 here-in-before but side of Book case. |
| 201 | All as per srl item No 198.0 here-in-before but door of book case including CP knob and continues piano type hinges. |
| 202 | Removing old existing unsv legs from book case and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts all as shown on drawing and as directed. |
| 203 | Removing of old existing unsv back ply of book case and supply and fixing the new back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed (Make - Greenply/Kitply/Century/ Archid Gold) |
| 204 | Removing of old existing unsv lock and S&F of new lock 50mm, 4 lever ( Make - Godrej/Link/Plaza) as per size and design shown on drg complete all as specified and directed. |
| 205 | Removing of old existing unsv magnetic catcher and S&F of new magnetic catcher to side board as per size and design shown on drg complete all as specified and directed. |
| 206 | Removing of old/broken existing glass shutter and S&F complete new glass assembly using 6mm thick glass and aluminium channel as per direction of Engr-In-Charge/GE. |
| 207 | POLISHING OF WOODEN FURNITURE |
| 208 | Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items all as shown on drawing and as directed. |
| 209 | Almirah med with 1/2H x 1/2S (DB-4049, 4042, FD-108) |
| 210 | Bed Hard (FD-246, 213,245) |
| 211 | Chair Dining (FD - 279) |
| 212 | Chair dining JCO/Ors (FD/Map-II/05) |
| 213 | Chair dining Offrs with Cushion (FD/E6/MAP-II/04) |
| 214 | Chair wooden bottom w/o arms (FD-285) |
| 215 | Chair Writing (FD - 280) |
| 216 | Chair Easy (FD-229) |
| 217 | Sofa Set 04/05 seater (FD-281,373,258) |
| 218 | Bin Linen Multipurpose (FD/E6/MAP-II/07) |
| 219 | Side Board (FD-241/372) |
| 220 | Hat Stand (FD-23,206,233,361,362) |
| 221 | Peg table (FD-277/384) |
| 222 | Trestle Store Room Wooden (DB-4101/FD-86) |
| 223 | Teapoy (FD– 382) |
| 224 | Table writing (FD-275) |
| 225 | Table centre (FD-235/274) |
| 226 | Table bed side (DB-395,FD-276) |
| 227 | Table Dining 8 Person (FD-273/FD/MAP-II/03 ) |
| 228 | Table Dining 06 Person (FD-273/FD/MAP-II/03 ) |
| 229 | Table Dining 1200 x 900mm (FD-273/FD/MAP-II/03 ) |
| 230 | Table 3'x3' (FD-228/291) |
| 231 | Table Office Clerk (DB-4120) |
| 232 | Table 900x600 mm with Drawer (FD -283) |
| 233 | Table 900x600 mm without Drawer (FD -284) Please Enable Macros to View BoQ information |
