|
| 1 | Dismantling post/struts (wood,steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed |
| 2 | Dismantling wrought iron or Mild steel work of any descrption not other wise provided for complete all as specified and as directed |
| 3 | Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed |
| 4 | Dismantling barbed wire of any type complete all as specified and as directed |
| 5 | Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed |
| 6 | M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed |
| 7 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.including flat iron for fencing etc , and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed |
| 8 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed |
| 9 | Supply and Fixing chain link fencing including line wires, any mesh, size (weight not less than 3kg /sqm) and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed |
| 10 | S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe 290 Gde E-165 complete all as specified and as directed |
| 11 | S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-290 Gde E- 165 complete all as specified and as directed |
| 12 | M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed |
| 13 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) ) complete all as specified and as directed) |
| 14 | Labour only for Restraining,resecuring old barbed wire of any description including making good staples etc complete all as specified and as directed |
| 15 | M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed |
| 16 | M&L two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed |
| 17 | Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed |
| 18 | Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/disintregated soil for foundation etc complete all as directed. |
| 19 | M&L for precast cement concrete solid building blocks masonary exc 10 cm in width and setting in cement mortar 1:4, type C-1, 1:3:6 (20 mm graded agregate ) complete all as specified and as directed |
| 20 | M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragatein lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 21 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (75mm bore) complete all as specified and as directed |
| 22 | S&F PVC (SWR) bends any radius 75 mm bore. complete all as specified and as directed |
| 23 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed |
| 24 | M & L for Rendering 10mm thick in cement mortar 1:4 on fair face of brick or concrete finished even and smooth without to using extra cement complete all as specified and as directed |
| 25 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over on coat of chalk white primer complete all as specified and as directed |
| 26 | Demolition of Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 27 | Demolition of unreinforced cement concrete of any description and in any position |
| 28 | M&L cement concrete 1:3:6 type C-1 (20mm graded agg) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 29 | M&L Chequered cement concrete coloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 30 | M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed. |
| 31 | M & L for Sand filling under floors or in foundations including watering and consolidation |
| 32 | M&L for providing PCC 1:3:6 type C2, 75mm thick using 40mm graded stone aggregate as a sub base complete all as specified and as directed |
| 33 | Supply and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories like S/S ball etc complete including taking down old unsv rail etc all as specified and as directed. |
| 34 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed |
| 35 | M&L Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 36 | M&L Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed |
| 37 | Formwork to sides of flat rough finished concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 38 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces. complete all as specified and as directed |
| 39 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 40 | M&L Mild steel TMT bars 5 mm dia & over upto and including 10mm dia in stirups, spacers and binders complete all as specified and as directed |
| 41 | M&L for preparation of new plastered brick/stone/concrete surface applying two coat of synthetic paint over a coat of priming paint complete as per manufactured instruction all as specified and directed. |
| 42 | M&L for preparation of old painted surfaces of steel materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 43 | M&L for preparation of old plastred surfaces of wall and applying one coat of anti fungal paint (Apex ultima of Asian) on external wall on surfaces of parapet wall stone etc. complete all as specified and as directed |
| 44 | M&L for preparation of old surfaces of floors and applying one coat of anti fungal paint (Apex tiles guard of Asian) on external floor or manglore pattern tiles surfaces complete all as specified and as directed |
| 45 | M&L for preparation existing treatment on external surfaces of wall and applying one coat cement based paint including making good the disturbed portion of wal with necessary cement mortar etc including removing any vegitation from the old wall surafce complete all as specified and as directed. |
| 46 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laided in any mortar complete . |
| 47 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.and 20 mm thick screed bed CM 1:6 complete all as specified and as directed. |
| 48 | M&L for plain cement concrete type-C2, 1:3:6 (40mm garaded agg.) in surface channel and drains complete all as specified and directed Please Enable Macros to View BoQ information |
