|
| 1 | S&F in repair steel rolling shutters with lath thickness 1mm, without ball bearing, all as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated push pull or manual type complete all as specified and directed. |
| 2 | All as per Srl item No 01 above but gear operated type with level gear box and crank handle. |
| 3 | S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 4 | S&F ball bearing for rolling shutters all as specified and directed by Engr-in-Charge. |
| 5 | M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of surfaces complete all as specified and directed. |
| 6 | M&L for granite (of any type) work (table rubbed and polished) 16-18mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick cement screed in CM 1:4 including demolition of exisiting complete all as specified and directed. |
| 7 | S&F 0.63mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed. |
| 8 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of old asbestos/corrugated/ semicorrugated sheet complete all as specified and directed. |
| 9 | S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe-290,Gde-E-165 complete all as specified and directed. |
| 10 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 11 | M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base for paver block paving to raise level complete all as specified and directed |
| 12 | Demolition of cement concrete of any description and in any position(above/below of ground level) not otherwise specifically provided as in sunken floor, plinth protection, roof kerb, foundation, sub base etc complete all as specified and directed. |
| 13 | M&L for 60 mm thick PCC (M-35) factory made with grey cement and pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand including demolition of of existing tiles and screed complete all as specified and as directed by Engr-in-Charge. (Note:- Sand will be paid under relavent item). |
| 14 | M&L for sand filling under floors or in paving or in foundations including watering and consolidation complete all as specified. (Note:- Punned down thickness shall be measured). |
| 15 | M&L for rubber moulded chequered cement concrete coloured tiles with glossy finish 30cm x 30cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry with pigments in floors, including cement mortar (1:4) screed bed incl demolition of existing tiles complete all as specified and as directed by Engr-in-Charge. |
| 16 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 17 | M&L for brick work with fly ash bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 18 | All as per Srl item No 17 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 16 shall be reused after necessary cleaning of mortar) |
| 19 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping/band and bed block etc incl necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 20 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed. |
| 21 | M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including demolition of existing complete all as specified and directed. |
| 22 | Hardcore of gauge of broken stone/boulder n exc. 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and directed |
| 23 | M&L for pre-cast saucer drain RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and similar work etc complete all as specified and directed. |
| 24 | S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/ floor including dismantling of existing complete all as specified and directed. |
| 25 | S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed. |
| 26 | Cleaning with nano bio wash the existing surface of concrete and reinforcements by wire brush including scrapping and cleaning with emery paper or by air blasting or sand blasting incl foreign matrials, loose concrete/ aggregate etc and washing down with water as required complete all as specified and directed. |
| 27 | M&L for crack repairing : openthe crack, applying nano shorter chain, high penetration flexible, water resistance base (2) active part (1) : Nano 611% flexible powder (3), complete all as specified and directed. |
| 28 | Providing and applying nano water base elastomeric finish two coats over one coat of nano water base elastomeric primer not containing toxic materials like Pb, Cr, Zn, biocides/ organocides having defect free nano particles with inhibiting characteristic having bacteria killing rate above 40% and high anti-fungal properties with supper hydrophobic properties with contact angle of water more than 750 with elongation (stretch ability) of more than 300% in a nano- structured self assembled dispersion system with VOC level of less than 1%, 40 micron DFGT of top coat including scaffolding, surface preparation, cleaning etc complete as per specified and as directed by Engineer-in-Charge. |
| 29 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 32,700/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
