|
| 1 | Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out for taking out / laying of GI / CI/DI pipe line and making bottom surfaces of excavation levelled. |
| 2 | Excavation in trenches in Hard /Dense soil not exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out for taking out / laying of GI / CI/DI pipe line and making bottom surfaces of excavation levelled. |
| 3 | Returning, filling in trenches with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as directed by the Engineer-in-Charge. |
| 4 | Removing surplus soil / spoil to a distance not exceeding 50 metre away and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed by the Engineer-in-Charge. |
| 5 | M & L Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 15mm dia |
| 6 | M & L Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 20mm dia |
| 7 | M & L Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 25mm to 32mm dia |
| 8 | M & L Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 40mm to 50mm dia |
| 9 | M & L Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 80mm to 100mm dia |
| 10 | Supply and laying in trenches Galvanised steel (Gl) tubing 'Medium grade' ISI marked with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) with cutting, screwing, making forged bends on piping as required. insertion of Connectors where required or directed. including cutting through walls, floors, etc. and their making good all as specified and as directed for following size of pipes: (Note : Earthwork shall be measured and paid separately under relevant Item) |
| 11 | 15mm bore dia |
| 12 | 20mm bore dia |
| 13 | 25mm bore dia |
| 14 | 40mm bore dia |
| 15 | 50mm bore dia |
| 16 | 80mm bore dia |
| 17 | 100mm bore dia |
| 18 | Supply and fixing to walls and ceilings or laid on floor Galvanised steel (Gl) tubing 'Medium grade' ISI marked with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) with complete with clips, wall hooks, wooden plugs & including cutting, screwing, making forged bends on piping as required. insertion of connectors where required or directed. including cutting through walls, floors, etc. and their making good all as specified and as directed for following size of pipes: |
| 19 | 15mm bore dia |
| 20 | 20mm bore dia |
| 21 | 25mm bore dia |
| 22 | 40mm bore dia |
| 23 | 50mm bore dia |
| 24 | M & L for Taking up or down CI/DI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints including turning water OFF or ON as necessary and taking off and refixing covers, access doors etc. all as specified and as directed by Engineer In Charge. |
| 25 | 100mm dia |
| 26 | 150mm dia |
| 27 | 200mm dia |
| 28 | Supply and laying Ductile iron pipes confirming to IS : 8329 of class K-7, ISI marked including all specials, laid in trenches conforming to IS : 1536-2001 and ISI marked, suitable for following size of pipe complete all as specified and directed by Engr -in-charge. NOTE: joints and jointing material include in quated rate.(Excavation and earth work,and DI specials will be measured and paid separately) |
| 29 | 100mm dia |
| 30 | 150mm dia |
| 31 | 200mm dia |
| 32 | M&L Cutting cast iron / Ductile iron pipes in position for reducing to required length or insertion of new tees, branches, Mechanical Joints etc, ail as directed by Engr-in-charge. Size of pipe 375/400mm bore |
| 33 | All as per item No 14 above but size of CI/DI pipe 300/350mm bore. |
| 34 | S & F CI/DI fittings, as per IS-1538- 1976 (Part I to XXV) ISI marked, heavy duty, such as CI bends (any type, radius and angle) Tappers any type straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch , Y junctions , double branch, cross complete fixed to walls and ceiling or laid in floors with all fittings (all sockets or socket and spigot), collars, caps , upto 150 mm dia pipe etc complete all as specified. |
| 35 | - do - but for 200mm to 400mm bore Please Enable Macros to View BoQ information |
| 36 | - do - but for 200mm to 400mm bore Please Enable Macros to View BoQ information |
