|
| 1 | Schedule 'A' B/R |
| 2 | Excavating over areas, not exceeding 1.50 Metre deep and getting out in loose/ soft soil, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Removing excavated material exceed 250 Metre but not exceeding 500 Metre and depositing where directed, complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Material & Labour for Hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Material & Labour for cement concrete 150mm thick type D-2, 1:2:4 (40mm graded aggregate) as in floor as in sub base for laying floor finishes, complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Material & Labour for cement concrete 75mm thick type D-2, 1:4:8 (40mm graded aggregate) as in floor as in sub base for laying floor finishes, complete all as specified and directed by the Engineer-in-Charge. |
| 7 | Material & Labour for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by the Engineer-in-Charge. |
| 8 | Material & Labour for M-35 grade 60mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006, complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Material & Labour for Pre-cast cement concrete type C-1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in cement mortar 1 :6, complete all as specified and directed by the Engineer-in-Charge. |
| 10 | Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in Cement Mortar 1:4 and to be finished even and smooth with out using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 11 | Supply & Fixing fabricated stainless steel wok sitting benches made out of stainless steel pipe of grade SS 304 with bright polish surface, as per the pattern approved by the Engr-in-Charge, complete all as specified and directed by the Engineer-in-Charge. |
| 12 | Schedule 'A' Water Supply |
| 13 | Supply and laying of CPVC pipes of size 50mm dia (outer dia) SDR-11 including plain CPVC SDR 11 including all fittings such as bends elbows, tees, short pieces, connectors, check nuts, diminishing pieces, caps and plugs, unions, etc., fixed complete laid in trenches / along the walls / ceilings / floors / ducts / on pillar post and including making good, complete all as specified and directed by the Engineer-in-Charge. |
| 14 | Supply and laying of CPVC pipes of size 40/25mm dia (outer dia) SDR-11 including plain CPVC SDR 11 including all fittings such as bends elbows, tees, short pieces, connectors, check nuts, diminishing pieces, caps and plugs, unions, etc fixed complete laid in trenches / along the walls / ceilings / floors / ducts / on pillar post and including making good, complete all as specified and directed by the Engineer-in-Charge. |
| 15 | Supply & Fixing Ball Valve with Long Handle of size 40/25mm dia and connected at both ends for CPVC pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc. and including any addition / alteration required for fixing, and making good, complete all as specified and directed by the Engineer-in-Charge. |
| 16 | Supply & Fixing Ball Valve with Long Handle of size 50mm dia and connected at both ends for CPVC pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc. and including any addition / alteration required for fixing and making good, complete all as specified and directed by the Engineer-in-Charge. |
| 17 | Material & Labour for cutting existing road/hard standing not exc 45 x 45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil, complete all as specified and directed by the Engineer-in-Charge. |
| 18 | Material & Construction of valve chamber for CPVC 50mm ball valve from suitable brick and cementing on it closing by suitable cover, complete all as specified and directed by the Engineer-in-Charge. |
| 19 | Supply and Fixing Boring to DI pipe of 80mm diameter, diameter of bore is 50/40/25mm and permanant and fix joining CPVC expander of 25/40/50mm diameter, complete all as specified and directed by the Engineer-in-Charge. |
| 20 | Excavation in trenches not exceeding 1.50 Metre wide and not exceeding 1.50 Metre in depth, for foundation, etc., or for shafts, well, cesspits, manholes, pier holes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 Metre in depth and getting out Soft/ Loose soil, complete all as specified and directed by the Engineer-in-Charge. |
| 21 | Excavation in trenches not exceeding 1.50 Metre wide and not exceeding 1.50 Metre in depth, for foundation, etc., or for shafts, well, cesspits, manholes, pier holes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 Metre in depth and and getting out Hard/ dense soil, complete all as specified and directed by the Engineer-in-Charge. |
| 22 | Returning filling in including spreading, levelling, watering and well Ramming in layers not exc 25 cm thick, complete all as specified and directed by the Engineer-in-Charge. |
| 23 | Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified and directed by the Engineer-in-Charge. |
| 24 | Supply & Fixing HDPE pipe PN 12.5 (SDR 11) grade of 20mm diameter, complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
