|
| 1 | M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6), and including demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc. complete all as specified and as directed. |
| 2 | M & L for PCC (1:2:4) type B-1 using 20mm graded aggreagte as in coping bed block etc complete all as specified and as directed |
| 3 | M&L PCC in surface channels,benching in sewers,drains etc type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and as directed. |
| 4 | M & L for rendering in cement mortar (1:4) 15mm thick on concrete /brick masonry wall surfaces, complete all as specified and as directed. (Note WPC paid separetely) |
| 5 | M&L Pre-cast Reinforced Cement Concrete (1:2:4) (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar (1:4) including demolition of existing RCC slabs complete all as specified and as directed.(NOTE : Reinforcement will be Measured and Paid separately under appropriate Items.) |
| 6 | M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 7 | M&L two coats of cement base paint over a coat of primer on new wall surface including preparation of surface.complete all as specified and as directed. |
| 8 | M&L preparation of old surface of wall and applying one coat of cement base paint complete all as specified and as directed. |
| 9 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc.complete all as specified and as directed. |
| 10 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.complete all as specified and as directed. |
| 11 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 12 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing/ view cutter including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed. |
| 13 | Material and Labour for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with welding for securing chain link fencing etc conforming to Fe-290.Gde-E-165, complete all as specified and directed., complete all as specified and as directed. |
| 14 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 15 | M&L Preparing surface of wood & wood based materials, steel & iron work, new or old & treated with tar or coal tar black paint, area tarred exc 0.1 sq. m. but n exc 0.5 sq. m each, treating ends of posts, backs of chowkats, etc.complete all as specified and as directed. |
| 16 | All as per item No.above herein before but not exceeding 10cm wide or girth. complete all as specified and as directed. |
| 17 | M&L for mild steel work for securing of chain link fencing and similar small articles etc confirming to IS-15911 completed all as specified and as directed. |
| 18 | S & F MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts and 5 to 10 CM long all as complete all as specified and as directed. |
| 19 | S&F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as complete all as specified and as directed. (Each line to be measured separately) |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and as directed. |
| 21 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. |
| 22 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE 410,E-250 Qualitry A including dismantling wrought or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 23 | M& L for Granite of any type 20MM thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in vertical surfaces of wall incl 10 MM thick backing coat in CM (1:4) Including Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter and any position. |
| 24 | Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed. |
| 25 | M&L for PCC (1:3:6) type C21 using 40MM graded aggreagte as in in Foundations, Filling, sub base and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed. |
| 26 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and as directed. |
| 27 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and as directed. |
| 28 | S&F in repair 450mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required |
| 29 | S&F for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) Concrete bed to drain pipes 450 mm bore includimg packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and as directed . |
| 30 | M&L for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate set in cement mortar (1:4) in kerb stone with plain fair faces complete all as specified and as directed |
| 31 | S&F repairs of seccon concertina coil 600 mm dia (before stretching )with 10-12 stands of SRPBT wire of minimum dia 2.59 tensile strength of 1620 N/Sqmm with anticorrosive mint green paint conforming to IS-513 DD grade & IS-4454 Part I /1981 garde -II for respective material of razor bldg and core wire including all fixing arrangements as per manufactures instruction for fixing & erection complete all as specified and as directed by Engineer-In-Charge |
| 32 | S& F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screw ,including dismantling plain or corrugated steel sheeting any gauge ,thickness in roof covering. complete all as specified and as directed |
| 33 | S& F pre painted galvalume zinc coating GI based steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screw ,including dismantling plain or corrugated steel sheeting any gauge ,thickness in roof covering. complete all as specified and as directed |
| 34 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E -165) complete all as specified and as directed. Please Enable Macros to View BoQ information |
