|
| 1 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed. |
| 4 | M&L for wood shutter exc 1 sqm but not exc 2.00 sqm including resecuring or easing & adjusting without taking down of shutter complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel gates etc complete all as specified and directed. |
| 6 | S&F for Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed. |
| 7 | S&F for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed. |
| 8 | S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified & directed. |
| 9 | S & F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 10 | S&F 200 mm long mild steel barrel tower blot, stove enamelled black with bright bolt and fixed complete all as specified & directed. |
| 11 | S&F 150 mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed. |
| 12 | S&F 300 mm long mild steel sliding door bolt plate typestove enamelled black with bright bolt not less than 12mm dia with and incl minimum of 6 blots and nuts four on blot plate and twoon staple plate and fixed complete all as specified and directed. |
| 13 | S&F Mild steel butt hinge medium weight cold rolled of size 100 mm long and fixed with screw/ welding complete all as specified and directed. |
| 14 | S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed. |
| 15 | Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tales complete all as specified & directed. |
| 16 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed. |
| 17 | S&F for 100 mm long stainless steel Butt hinges medium weight complete all as specified and directed. |
| 18 | M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed. |
| 19 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed. |
| 20 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified. |
| 21 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing position complete all as specified and directed |
| 23 | S&F powder coated anodized aluminium door & frame for door, windows and ventilator with one or more rebates incl joining cleat for fixing etc of weighing 0.55 kg/m complete all as specified and directed. |
| 24 | S&F of power coated any colour anodised aluminium door shutter, aluminium section weighting 0.55 kg/m incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed |
| 25 | S & F powder coated Anodised aluminium window and ventilator shutters,side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed. |
| 26 | S&F in repair double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick Al alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed. |
| 27 | M&L for fixing in repair brasss mortice lock of size 100mm and of 4 levers complete all as specified and directed. |
| 28 | S&F 5.5 mm thick coloured sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 29 | S&F of figured glass 5 mm thick , pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pan complete all as specified and directed |
| 30 | S & F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed. |
| 31 | S & F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed. |
| 32 | S&F of steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed. |
| 33 | S&F for 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed. |
| 34 | S&F of figured glass 3mm thick , pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pan complete all as specified and directed |
| 35 | S&F in repairs 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed. |
| 36 | S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 37 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 38 | S&F in repair of mild steel 300mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed |
| 39 | S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 40 | S & F in repair Door closer( Dia cast body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 41 | Dismantling of floor, hearth or wall tiles / terrazo/mozaic/Granite (floor,dado) including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed.. |
| 42 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including 20 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 43 | Material & labour glazed ceramic coloured tiles of size 450x300x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement plaster of CM (1:4) complete all as specified & directed. |
| 44 | Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 45 | Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 46 | M&L for 15mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for internal plastering over bricks, block , stone walls as well as concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement whereever requires complete all as specified and directed. |
| 47 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 2mm thick wall interior wall care putty and a coat of primer.complete all as specified and directed. |
| 48 | M&L for 15mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for external plastering over fair face of bricks, block , stone walls as well as concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement whereever requires incl water proofing compound complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height incl necessary scaffolding /Centreing etc complete all as specified and directed. |
| 50 | S&F in repairs Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) both side decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. The rate includes fixing of 18mm wide lipping matching with colour of laminated board. : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets.complete all as specified and directed. |
| 51 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed. |
| 52 | S & F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm complete all as specified and directed.. |
| 53 | S&F in repairs Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified and directed |
| 54 | S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and decorative knobs including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed. |
| 55 | S&F in repairs Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. |
| 56 | S&F in repairs drawer lock brass 2 levers grade I, size 50mm complete all as specified and directed. |
| 57 | M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board,shelves,etc.wooden area should drill by 6 mm bit,Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit,gap between two holes is 45 cm to 60 cm.filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces.The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm.The ATT chemical should contains.(i) Byfinthrin 20 % EC(Smell Chemical)(ii) CHLORPYRIPHOS 20 % EC (Smell Chemical)(iii) Imidacloprid 30.5 % SC (Odor less Chemical)The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE.(a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years. |
| 58 | M& L in repairs for door seal with stainless steel strip complete all as specified and directed. |
| 59 | Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from MoD land etc complete all as specified and directed. |
| 60 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in in roof top surface even and smooth without using extra cement all as specified and directed. |
| 61 | M&L for 10mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for rendering over concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement wherever requires complete all as specified and directed. |
| 62 | M&L for preparation of new surface of roof incl cleaning the surface by using pressure hose and applying polymer liquid nitobond @ 4-5 Sqm/ltr and then apply one coat of high performance ultra flexible polymer modified water proofing membrane (package of 15kg powder and 10 kg liquid covers 15-16 sqm). A high performance polyurethane liquid membrane roof coating applied cold in two coats @ 0.5 kg/sqm/ 2 coats spray/ brush at interval of 8 to 10 hrs and have properties of h an elongation of 100 percent as per ASTM D 412 and tensile strength of not less than 1.10mpa as per ASTM D 12 The item includes primer coat applied @ 10 ltr/sqm over a geotextile of 40 GSM before applying main coat complete all as specified and directed.Note : (a) The work shall be carried out by the authorized applicator of manufacturer by using modern techniques. THe contractor shall also furnish warranty of quality , finish work and effectiveness of water proofing treatment under this item for a period of not less than 7 years from the date of completion along with manufacturer warrenty of material for the same period. (b) From the taking down, preparation of the surface, Engr-in-Charge shall approve each and every stage before applying finishing coat. |
| 63 | Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 64 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 65 | S&F of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or screws J-type or cranked hook complete all as specified and directed. |
| 66 | S&F of 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc.with grade of zinc coating 275 complete all as specified and directed. |
| 67 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 68 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 69 | Dismantling of wooden wall panelling incl. frame and make good the surface etc all as specified and directed. |
| 70 | S&F solid PVC Wall Lining for wall panelling consisting of 5 mm thick wood grain printed colour PVC sheet inclusive fixing with all accessories at site as per specifications and drawing complete all as specified and directed. |
| 71 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixinf on to wall to make PVC frame as per specified & directed. |
| 72 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 73 | S&F of anodised aluminium snap grid frame work for false ceiling all as specified and directed |
| 74 | S&F of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 75 | S&F of non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/ Aluminium framework with screws complete all as specified and as directed. |
| 76 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 77 | M & L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed . |
| 78 | M&L for chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors with grey pigment cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 79 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 80 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 81 | M&l for preparation of old surface for injecting grouting using polymer modified water grout manufactured by approved manufacturer incl drilling 12 mm dia holes upto 40mm depth and provide PVC nozzles/ entry ports over grid @ 1m c/c or less depending upon the situation. Before injecting the grout, compressed air to be blow to remove all dirts and dust, grout at pressure of 5Kg/cm2 to be done till refusal / rejection or appearance of grout from adjacent nozzle. After grouting is complete, the nozzles will be sealed with CM 1:3 and cured. Item includes arrangement of necessary scaffolding to carried out work as specified and directed. |
| 82 | S&F in repairs 200 mm long stainless steel barrel tower blot, stove enamelled black with bright bolt and fixed complete all as specified & directed. |
| 83 | S&F in repairs 150 mm long stainless steel pressed handle oval type stove enamelled black complete all as specified and directed. |
| 84 | S&F in repairs 300 mm long stainless steel sliding door bolt plate typestove enamelled black with bright bolt not less than 12mm dia with and incl minimum of 6 blots and nuts four on blot plate and twoon staple plate and fixed complete all as specified and directed. |
| 85 | S&F in repairs Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed. |
| 86 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade ST 240 complete all as specified and directed. Please Enable Macros to View BoQ information |
