|
| 1 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed. |
| 3 | Taking down shutters of any description nexc 1.0 Sqm each complete all as specified and as directed. |
| 4 | Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and as directed. |
| 5 | Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm each complete all as specified and as directed. |
| 6 | Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed. |
| 7 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed. |
| 8 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 9 | Demolition of reinforced cement concrete (RCC Tank etc) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 10 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 11 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed. |
| 12 | Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and as directed. |
| 13 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 14 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed. |
| 15 | RCC nominal mix 1:2:4 type B-1 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified and as directed. |
| 16 | M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.Note :- Weight of binding wire shall not be considered for measurement and payment purpose. |
| 17 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 18 | M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed. |
| 19 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed. |
| 20 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and as directed. |
| 21 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed. |
| 22 | S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and as directed. |
| 23 | S & F 35 mm thick Second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 24 | S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed. |
| 25 | S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 26 | S&F in repair stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 27 | S&F 18/19 mm thick block boards , grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame complete all as specified and as directed. |
| 28 | S&F 12 mm thick Plywood with 07 nos of ply, grade BWP, type BB fixed with screws to timber frame work complete all as specified and as directed. |
| 29 | S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed. |
| 30 | S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and as directed. |
| 31 | S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and as directed. |
| 32 | S&F telescopic channel / ball bearing drawer channel of size 500 mm long complete all as specified and as directed. |
| 33 | S&F in repair stainless steel three self pullout basket of size 150x485x530mm complete all as specified and as directed. |
| 34 | S&F in repair plain stainless steel basket of size 520x485x200mm complete all as specified and directed. |
| 35 | S&F in repair plain stainless steel plate basket of size 520x485x200mm complete all as specified and directed. |
| 36 | S&F in repair plain stainless steel cup & saucer basket of size 520x485x100mm complete all as specified and directed. |
| 37 | S&F in repair plain stainless steel perforated cutlery basket of size 520x485x100mm complete all as specified and directed. |
| 38 | S&F in repair plain stainless steel grain trolley basket of size 520x485x350mm complete all as specified and directed. |
| 39 | S&F W- hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and as directed. |
| 40 | S&F W- hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and as directed. |
| 41 | S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed. |
| 42 | S&F 100mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed. |
| 43 | S&F Extruded brass handles, fabricated type polished of size 150 mm complete all as specified and as directed. |
| 44 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed. |
| 45 | S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed. |
| 46 | S&F extruded aluminium alloy handles fabricated type anodised of size 125 mm complete all as specified and as directed. |
| 47 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed. |
| 48 | S&F 30mm width of flaps (When open in mm) continuous (piano) hinges, mild steel , bright finish or electro galvanised complete all as specified and as directed. |
| 49 | S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 50 | S&F powder coated sliding type (min powder coating 50 micron) anodised aluminium frame for doors, windows & ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 51 | S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters two or three track sliding type or side hung/ without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed. |
| 52 | S&F powder coated (powder coating min 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from metal framed or wooden including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed. |
| 54 | M&L 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed. |
| 55 | M&L for 4 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed. |
| 56 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed. |
| 57 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 58 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed. |
| 59 | S&F of 5.5 mm thick sheet glass black tinted selected quality for fixing of aluminium door and window shutter Partitions etc complete all as specified and as directed. |
| 60 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed. |
| 61 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed. |
| 62 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 63 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed. |
| 64 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed. |
| 65 | M&L for non skid ceremic white tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 66 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 67 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation complete all as specified and directed. |
| 68 | Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed. |
| 69 | M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed. |
| 70 | M&L 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed. |
| 71 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 72 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 73 | M&L for rendering 10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathin complete all as specified and directed. |
| 74 | M&L for rendering 15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed. |
| 75 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 76 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercia plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 77 | S&F for 20 mm dia harrison rails, stainless steel chromiun plated with fixing brackets stops , rollers etc complete all as specified and directed. |
| 78 | S&F for 20 mm dia brass chromium plated brackets and lattoo complete all as specified and directed. |
| 79 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 80 | S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 81 | S&F vitreous china wash down water closet pan (Pedestal Pattern) with P or S Trap white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed. |
| 82 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 83 | S & F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring as in repairs complete all as specified and directed. |
| 84 | S&F in repairs PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 85 | S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed. |
| 86 | S & F in repairs to 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed. |
| 87 | S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 88 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed. |
| 89 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including taking down old unservicable sink complete all as specified and directed. |
| 90 | S&F in repair Stainless steel kitchen plate rack of size 31\\" X 30' X 10\\" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed. |
| 91 | S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 92 | M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 93 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 94 | Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, loks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete. notes : (door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid sepetately under respective item of schedules) complete all as specified and directed. |
| 95 | S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and as directed. |
| 96 | S&F in repair of floor door spring etc complete all as specified and as directed. |
| 97 | S&F in repair of aluminium (extruded section body) door closer hydraulically regulated design No 2 etc universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 98 | S&F in repair of Mortice lock of 100mm size vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and as directed. |
| 99 | S&F of Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed. |
| 100 | M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate including weldeing /reveting to bring the steel gate /wicket gate (any size) in service condtions etc complete all as specified and directed. |
| 101 | M&L for repairs to rolling shutter including necessary gressing, welding, locking arrangement including serviceing to gear box etc (any size) complete as to bring in service condtions etc all as specified and directed. |
| 102 | M&L for repairs to collapsible steel gate including necessary gressing, welding, locking arrangement including serviceing etc (any size) complete as to bring in service condtions all as specified and directed. |
| 103 | Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 nexc 500 ltrs incl writing \\"TC on -DD/MM/YY\\" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed. |
| 104 | Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 nexc 1000 ltrs incl writing \\"TC on -DD/MM/YY\\" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed. |
| 105 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 106 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 107 | M&L for preparation of new or old previously untreated surfaces of wood and wood based materials description n exc 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over pink primer surfaces when unconnected with other painting or when painted in different tint complete all as specified and directed. Please Enable Macros to View BoQ information |
