|
| 1 | Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soilNote : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. |
| 2 | Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 3 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | Taking up/down old unserviceable CI/DI pipes from trenches/wall/floor etc for repair including cleaning with all fittings of 80mm bore complete all as specified and as directed by Engr-in-Charge. Note: Excavation/earth work will be measured and paidseparately under relevent item. |
| 5 | All as per item No 4.00 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 6 | All as per item No 4.00 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 7 | M&L for refixing/relaying of existing old DI/CI tubing of size 80mm bore obtain from item No 4.00 here in before, in new or existing position, after cleaning external and internal, and providing with and including all new jointing materials like rubber gasket including lubricants suitable as required laid in trenches incl connecting with existing lines all as directed by Engr-in-charge. Note:(i) DI fittings if required will be measured and paid separately. |
| 8 | All as per item No 7.00 here-in-before but of size 100 mm bore, obtain from item No. 5.00 here in before. |
| 9 | All as per item No 7.00 here-in-before but of size 150 mm bore, obtain from item No. 6.00 here in before. |
| 10 | Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards and metalic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, 80 mm bore laid in trenches |
| 11 | All as per item No 10.00 here-in-before but of size 100 mm bore. |
| 12 | All as per item No 10.00 here-in-before but of size 150 mm bore. |
| 13 | Taking up or down 80 mm bore steel tubing and connection including cleaning for relaying or removal to store from trenches/wall surfaces complete all as directed. |
| 14 | All as per item No 13.00 here-in-before but of size 50 mm bore. |
| 15 | All as per item No 13.00 here-in-before but of size 40 mm bore. |
| 16 | All as per item No 13.00 here-in-before but of size 25 mm bore. |
| 17 | All as per item No 13.00 here-in-before but of size 20 mm bore. |
| 18 | M&L for refixing/relaying existing old GI tubing of size 80mm bore obtain from item No. 13.00 here in before, in new or existing position, after cleaning external and internal, and providing with and including all new fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc. conforming to IS 1239 (Part-2): 2011, and also for cutting, screwing and waste and for making forged bends on piping as required inserting connectors, where required or directed. laid in trenches incl connecting with existing lines all as directed by Engr-in-charge. Note:(i) Union of long screwed have to be provided at starting / end point for jointing of pipe line . |
| 19 | All as per item No 18.00 here-in-before but of size 50 mm bore. |
| 20 | All as per item No 18.00 here-in-before but of size 40 mm bore. |
| 21 | All as per item No 18.00 here-in-before but of size 25 mm bore. |
| 22 | All as per item No 18.00 here-in-before but of size 20 mm bore. |
| 23 | Material and labour for laying of galvanised steel (Gl) tubing 80 mm bore, medium grade, ISI marked, conforming to IS 1239 (Part-1): 2004 with screwed socket joints, includings with all tube fillings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc. conforming to IS 1239 (Part-2): 2011 as required at site and also for cutting, screwing and waste and for making forged bends on piping as required inserting connectors, where required or directed. laid in trenches incl connecting with existing lines all as directed by Engr-in-charge. Note:(i) Union of long screwed have to be provided at starting / end point for jointing of pipe line . (ii) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment. |
| 24 | All as per item No 23.00 here-in-before but of size 50 mm bore. |
| 25 | All as per item No 23.00 here-in-before but of size 40 mm bore. |
| 26 | All as per item No 23.00 here-in-before but of size 25 mm bore. |
| 27 | All as per item No 23.00 here-in-before but of size 20 mm bore. |
| 28 | S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 29 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 30 | S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 31 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 25 mm bore pipe complete all as specified and directed. |
| 32 | M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 250 mm complete all as specified. |
| 33 | M&L for push on flexible joint alongwith all accessories like rubber gasket including lubricants suitable for 80 mm bore DI/CI pipe fittings spigot and socket type complete all as specified and directed. |
| 34 | All as per item No 33.00 here-in-before but of size 100 mm bore. |
| 35 | All as per item No 33.00 here-in-before but of size 150 mm bore. |
| 36 | Supply and fixing in repairs sluice valve 100 mm bore, ISI marked, as per IS 14846: 2000 , with valid CMLNo. , Batch No. and Manufacturer Serial No., class PN 1.6 with brass spindle, brass check nut, with fiber board gasket, bolts, nuts and washers for fixing the valve in position, in valve pit chambers or location as directed and specified by Engr-in-charge. Note : Contractor has to submit the test certificate and Purchase Voucher of valves before claiming the payment.. |
| 37 | All as per item No 36.00 here-in-before but of size 150 mm bore. |
| 38 | All as per item No 36.00 here-in-before but of size 200 mm bore. |
| 39 | All as per item No 36.00 here-in-before but of size 250 mm bore. |
| 40 | Supply, fixing and testing in repairs CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.0 confirming to IS: 5312, ISI marked of size 100 mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as specified and directed. |
| 41 | Supply, fixing and testing in repairs CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.0 confirming to IS: 5312, ISI marked of size 150 mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as specified and directed. |
| 42 | Supply and fixing of Butter fly valve 150mm bore confirming to IS, pressure rating PN1.6, Flange drilling CI valve body diaphragm, CI disc, Disc face ring -rubber, Aluminium hinge pin, CI hinge and bornze body ring complete including taking out existing UNSV valve complete all as specified and directed. |
| 43 | Refixing of Sluice valve/Butteryfly valve from 150 mm to 250 bore after taking out and repair/refacing of valve spindle,re grinding if required , including taking part and replacement of unserviceable parts, gland packing and reassembling as per existing size to make it leak proof and complete descaling and proper functioning at site including replacement of new nuts, bolts, washers and gasket as required at site, reassembling, testing and re-fixing complete all as directed. |
| 44 | All as per item No 43.00 here-in-before but of size 100 mm bore. |
| 45 | Supply and fixing of GM globe/gate valve suitable for 50 mm bore pipe with iron wheel head, screwed both ends for iron/PPR pipes, ISI marked, conf to IS including taking down old complete all as specified and as directed by Engr-in-Charge.Note: Union of long screwed have to be provided before fixing of gate valve. |
| 46 | All as per item No 45.00 here-in-before but of size 40 mm bore. |
| 47 | All as per item No 45.00 here-in-before but of size 25 mm bore. |
| 48 | All as per item No 45.00 here-in-before but of size 20 mm bore. |
| 49 | M&L for in repair/rectification of leakage in existing CI/DI Pipe Spigot/ socketed end of 100 mm bore including necessary earth work (i.e. excavation, removal & refilling, of trench), Pumping out water from the ditch and rectify the defects by taking out of existing lead and rejoining The same by using necessary additional lead, Lead Wool, Spun Yarn & etc including testing, commissioning of CI Pipe line complete all as directed Spun yarn & other arrangement for rectification of said defects is included in the cost of item complete). |
| 50 | All as per item No 49.00 here-in-before but for 150 mm bore pipe. |
| 51 | M&L for in repair/rectification of leakage in existing CI/GI of 100 mm bore including necessary earth work (i.e. excavation, removal & refilling, of trench), Pumping out water from the ditch and rectify the defects incl necessory earth work (i.e. excavation, rubber sheet nut & bolts etc and other arrangement for rectification of said deffects is included in the cost of item complete Removal and refilling of trenches). and rectify the deffects by taking out of existing rubber gasket / fibre sheet, nut & bolt etc and rejoining the same by using new one incl testing, commissioning of CI pipe line complete all as directed at site. |
| 52 | All as per item No 51.00 here-in-before but for 150 mm bore pipe. |
| 53 | M&L for in repair/rectification of leakage in existing GI/PVC line any size upto 80mm including necessary earth work (i.e. excavation, removal & refilling of trench,) if required, Pumping out water from the ditch and rectify the defects by taking out of existing GI/PVC pipe and rejoining the same by using necessary additional fittings, etc including testing of pipe line complete all as directed .Note All materials required for rectification of said defects is included in the cost of item complete). |
| 54 | S&F in repairs for straight plain brass ferrules (or connecting screws) screwed bolt ends of 20 mm bore Pipe complete all as specified and directed. |
| 55 | All as per item No 54.00 here-in-before but for 25 mm bore pipe. |
| 56 | Repair to valve pit chamber any size (with bricks works, PCC works,plasteing of internal and external surfaces making it leak proof wherever required including replacement of iron frame ,hinges , locking arrangement ,painting of iron frame ,painting of external plaster surface as per site requirement) by providing the followings : |
| 57 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of pillar complete all as directed. |
| 58 | M&L for cement concrete ( 1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping of brick masonary including weathering, slightly rounded or chamfered angles and throating, necessary formwork, demolition as directed complete all as specified |
| 59 | M&L for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete including demolition all as specified and directed. |
| 60 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar (1:4), complete all as specified and directed. |
| 61 | M&L for Preparation of new steel surface of any description over 10cm width or girth not other wise described and appplying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 62 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 600x600x600 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.00mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 63 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 900x900x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.00mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 64 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1200x1200x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.00mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 65 | M&L for Preparation of old pipe surface of any description over 10cm width or girth not other wise described and appplying one coat of synthetic enamel paint complete all as specified and directed. |
| 66 | M&L for framed work for valve pit chamber cover made of Mild steel (MS) equal angle and MS sheet including welding , cutting ,hinges , locking arrangments , painting including dismantling wrought iron or mild steel work of any description provided for valve pit chamber and for angle iron ladder of tank complete with and including two coat synthethic enamel paint high glossy finish, of Make Asian Apcolite rust shield , Anti rust shield PU enamel or equivalent make as catered in PS over and including a coat of primer and dismentaling of existing unservieable one complete all as specified and directed Please Enable Macros to View BoQ information |
| 67 | M&L for framed work for valve pit chamber cover made of Mild steel (MS) equal angle and MS sheet including welding , cutting ,hinges , locking arrangments , painting including dismantling wrought iron or mild steel work of any description provided for valve pit chamber and for angle iron ladder of tank complete with and including two coat synthethic enamel paint high glossy finish, of Make Asian Apcolite rust shield , Anti rust shield PU enamel or equivalent make as catered in PS over and including a coat of primer and dismentaling of existing unservieable one complete all as specified and directed Please Enable Macros to View BoQ information |
