|
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 2 | M&L for brick work with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified & directed by Engineer-in- charge. |
| 3 | M&L for brick work with burnt clay bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified & directed by Engineer-in- charge. |
| 4 | All as per item 03 here in before but except bricks |
| 5 | M&L for brick work with sub class B burnt clay bricks (old size), straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed by Engineer-in- charge. |
| 6 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.all as specified |
| 7 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified. |
| 8 | M&L Washed coloured stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). |
| 9 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden attens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 10 | M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer-in-Charge . |
| 11 | Demolition of Trellis work (Jafri)/ RCC Jallies, including taking as under of battens in trellis in one way complete all as specified & directed by Engineer-in- charge. |
| 12 | M&L 25 mm thick precast cement concrete 1:2:4, type B-0, louvres and jallies set in cement mortar 1:4 including all mould frame complete all as specified & directed by Engineer-in-charge |
| 13 | Material and labour for preparation of wall/ceiling surfaces and applying 1mm thick cement based external wall care putty on old or new plaster surface complete all as specified and directed. |
| 14 | M&L applying two coat of cement base paint over one coat of white wash on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge. |
| 15 | M&L for preparation of surfaces and applying one coats of cement base paint on old treated surface of wall etc complete all as specified and directed. |
| 16 | M&L for preparation of old surfaces and applying one coats of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed. |
| 17 | M&L for preparation of old surfaces and applying Two coats of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed. |
| 18 | M&L for preparation to old decorated, plastered or unplastered surfaces of ceiling, by brooming down, scraping down smoke spots, moulds, mossand efflorescent salts etc. and applying one coat of white (lime) wash including cornices pilasters etc complete all as specified and as directed. |
| 19 | M&L running welding in repairs exc 6mm n.exc 9mm thick of metal complete all as specified and directed by Engineer - in - Charge . |
| 20 | Raking out joints/pointing built in cement or cement lime mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. |
| 21 | M&L flush pointing to brick laid on edge in drain in CM 1:4 complete all as specified and directed. |
| 22 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. |
| 23 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 24 | M&L RCC 1:2:4 (nominal mix) type B-1, using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formworks all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:6) in landings, cover slabs (for manholes etc.), drain covers, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork complete all as specified and directed. |
| 26 | Demolition of cement concrete (unreinforced) of any description in ground floor and pavings n exc. 15 cm thickness (below or above GL) |
| 27 | M&L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface |
| 28 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified. |
| 29 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; size and shape as per requirement at site complete all as specified and directed. |
| 30 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 31 | M&L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick glossy finish, set, jointed & pointed in neat cement slurry in in floors with grey cement & pigment over 15mm thick screed in CM (1:6) complete all as specified. |
| 32 | All as per item 27 here in before but except coloured chequered cement concrete tiles |
| 33 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 34 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 35 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n.exc 4 Kg |
| 36 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate |
| 37 | M&L Mild steel work posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets, round bars with screwed ends etc. (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 38 | S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10 mm |
| 39 | Supply only chain link fencing of MS GI wire mesh of size 100 x 100mm, 3.2mm dia of GI wire mesh upto into mattresses or cages lapped wired incl.staple etc complete all as shown on drgs. |
| 40 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 41 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 42 | M&L Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members |
| 43 | M&L Preparation of new steel and iron surface of any description over 10cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 44 | M &L Painting of new steel surfaces of any description not otherwise described n.exc 10cm in width or girth including preparation of surfaces,priming with red oxide zinc chrome primer finished with two coats of synthetic enamel when unconnected with other painting or when painted in different tint complete complete all as specified. |
| 45 | M&L for preparation of old painted concrete surfaces of any description over 10 cm width or girth in road side kerbs, edges etc. and applying one coat of plastic emulsion paint all as specified and directed by Engineer - in - Charge . |
| 46 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge . |
| 47 | M&L for preparation of old painted steel surfaces of any description n exc. 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge . Please Enable Macros to View BoQ information |
