|
| 1 | Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exc 1.5mtr depth for laying pipe line/laying cable and getting out including trimming sides and forming bottom surface to the required level/slope etc. complete all as specified and directed |
| 2 | Removing excavated surplus soil l to a distance not exceeding 50 m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed. |
| 3 | Returning, filling in, tranches including spreading, levelling, watering and well ramming in hard/dense soil in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed. |
| 4 | Taking up or down existing GI steel water tubing of any grade including all GI fittings (such as bend, elbows, tees, connections, short pieces, back, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed of the following sizes |
| 5 | (a) 150 mm bore |
| 6 | (b) 100 mm bore |
| 7 | (c) 80 mm bore |
| 8 | (d) 50 mm bore |
| 9 | (e) 40 mm bore |
| 10 | (f) 25 mm bore |
| 11 | (g) 20 mm bore |
| 12 | S & F Steel water tubing medium grade galvanised with all GI fittings (such as bend,elbows,tees, connections, short pieces, back, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed of the following sizes |
| 13 | (a) 150 mm bore |
| 14 | (b) 100 mm bore |
| 15 | (c) 80 mm bore |
| 16 | (d) 50 mm bore |
| 17 | (e) 40 mm bore |
| 18 | (f) 25 mm bore |
| 19 | (g) 20 mm bore |
| 20 | Taking out old unserviceable gun metal, globe or gate valve including S & F gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe complete all as specified and directed of the following size :- |
| 21 | (a) 50mm bore (Nominal bore) |
| 22 | (b) 40mm bore (Nominal bore) |
| 23 | (c) 25mm bore (Nominal bore) |
| 24 | (d) 20mm bore (nominal bore) |
| 25 | (e) 15mm bore (nominal bore) |
| 26 | Taking out old U/S sluice valve for replacement including, supplying, testing and commencing of sluice valve of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainless nuts, bolts, washers & fibre/rubber gasket steel spindle all as specified and directed of the following size :- |
| 27 | (b) 150mm bore (Nominal bore) |
| 28 | (c) 100mm bore (Nominal bore) |
| 29 | (d) 80mm bore (Nominal bore) |
| 30 | Disconnecting of existing NRV and supplying installation, commencing, connecting and testing of cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges, fibre sheet gasket, nut-bolts & washers complete all as specified and directed of the following size :- |
| 31 | (a) 150 mm bore |
| 32 | (b) 100mm bore |
| 33 | (c) 80mm bore |
| 34 | Taking up or down existing GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces, tanks including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position including necessary excavation work complete all as specified and directed of the following size :- |
| 35 | (a) 100/150mm bore (Nominal bore) |
| 36 | (b) 80mm bore (Nominal bore) |
| 37 | (c) 50mm bore (Nominal bore) |
| 38 | (d) 40mm bore (Nominal bore) |
| 39 | (e) 25mm bore (Nominal bore) |
| 40 | M & L for cleaning of Nagpani pump house and its surrounding by removing grass, shrubs, fungus, algee including cleaning of valve pit chambers within the boundary of the installation/pump house complete all as specified and directed. |
| 41 | M & L for cleaning of Highest point pump house and its surrounding by removing grass, shrubs, fungus, algee including cleaning of valve pit chambers within the boundary of the installation complete all as specified and directed. |
| 42 | M & L for Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc and construction of brick masonry valve pit size 610x610x610mm (internal dimensions) including demolition of old valve pit chamber with following specifications complete all as specified & directed by Engineer-in-Charge: (a)Excavation in any type of soil including disposal of excavated earth to a distance not exceeding 100m, (b) 150mm thick PCC 1:4:8 type D-2 in foundation, (c) 230 mm thick brick work using old size bricks as in walls in CM 1:4, (d) 15mm thick internal plaster in CM 1:4, finished even and smooth without using extra cement.(e) 3.15 mm thick MS sheet cover including 40 x 40 x 6mm MS angle frame and hold fast including handles, hinges & with locking arrangement, (f) Two coats of black bituminous paint over a coat of red oxide primer on steel & iron surfaces. |
| 43 | M & L for Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc and construction of brick masonry valve pit size 1050x1050x900mm (internal dimensions) including demolition of old valve pit chamber with following specifications complete all as specified & directed by Engineer-in-Charge: (a)Excavation in any type of soil including disposal of excavated earth to a distance not exceeding 100m, (b) 150mm thick PCC 1:4:8 type D-2 in foundation, (c) 230 mm thick brick work using old size bricks as in walls in CM 1:4, (d) 15mm thick internal plaster in CM 1:4, finished even and smooth without using extra cement.(e) 3.15 mm thick MS sheet cover including 40 x 40 x 6mm MS angle frame and hold fast including handles, hinges & with locking arrangement, (f) Two coats of black bituminous paint over a coat of red oxide primer on steel & iron surfaces. |
| 44 | M & L for repairs to existing leaking joints (flanged/socketed/collar) upto 50 mm bore GI pipe line including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc, including necessary excavation work complete all as specified and directed. |
| 45 | M & L for repairs to existing leaking joints (flanged/socketed/collar) for 80 mm bore GI pipe line including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc, including necessary excavation work complete all as specified and directed. |
| 46 | M&L for repairs to existing leaking joints /flanged /socket/ collar for 100mm/150mm dia GI pipe line including replacement of flanged/socket/union/reducer etc with and including all necessary nuts, bolts, fibre/rubber insertion sheet and welding wherever required, to make the joints leak proof including necessary cutting, threading etc, including necessary excavation work complete all as specified and directed. |
| 47 | Complete cleaning of pressed steel/iron water storage tank from inside, extraction of all mud/sand/dust/Algee deposits, making it free from algee growth by scrapping & washing with water & painting with two coat of black bituminous paint on all the MS items fitted inside the paint on complete external surface of tank and staging / supports etc, inlet/outlet water pipe complete all as specified and as directed for the following :- |
| 48 | (a) 80,000 gallons capacity at Nagpani |
| 49 | (b) 38,000 gallons capacity at highest point. |
| 50 | (c) 20,000 gallons capacity at Nagpani. |
| 51 | (d) 8000 litre capacity to 32000 litre capacity at Chaubattia. |
| 52 | Complete cleaning of masonary water storage reservoir from inside, extraction of all dust/sand/mud/Algee deposits, making it free from algee growth by scrapping with brush, washing with water cleaning of all MS /iron/wooden frame work inside and roof of the reservoir & general cleanliness of the outside surface/area surrounding of the all plastered internal surface (excluding floor) of the tank and treatment with bleaching powder on the tank floor after cleaning & applying two coats of approved make & shade of snowcem on all sides of the tank & two coats of approved make & shade of snowcem of all sides of the outside of the tank including necessary painting with one coat of black bituminous paint on all steel /iron frames/angles of tank over black paint of size 2.5 fit x 1.5 fit including marking of tank capacity and date etc of cleaning. The entire Job is to be carried out all as specified and directed for the following reservoirs/tanks :- |
| 53 | (a) 5 lacs gallons capacity at Chaubattia |
| 54 | (b) 3 lacs gallons capacity at Chaubattia |
| 55 | (c) 42,000 gallons capacity at Highest point |
| 56 | (d) 50,000 gallons capacity at Chaubattia |
| 57 | Supply and fixing in replacement for coupling male and female with shaft alignment for pumping set 100HP size as per existing make /sample complete all as specified and as directed. |
| 58 | Supply and fixing in replacement for pump bearing for 100 HP pumping set pump as per existing make/sample complete all as specified and as directed. |
| 59 | Supply and fixing in replacement for pump bearing for 75 HP pumping set pump as per existing make/sample complete all as specified and as directed. |
| 60 | Supply & fix in replacement for 4 mm thick fibre sheet complete all as specified and directed. |
| 61 | Supply & fix in replacement for 6 mm thick fibre sheet complete all as specified and directed. |
| 62 | Supply & fix in replacement for 12 mm thick fibre packing sheet used in GI tubing connections complete all as specified and directed. |
| 63 | M&L in replacement for connecting copper lugs 50 to 95 Sqmm with incoming & outgoing feeder starter to motor connector complete all as specified and directed |
| 64 | Supply and fixing in replacement coupling rubber washer as per sample complete all as specified and directed |
| 65 | Supply & fix in replacement Copper finger suitable for Oil immersed starter 100 HP complete all as specified and directed. |
| 66 | Supply & fix in replacement Copper gutka suitable for Oil immersed starter 100 HP complete all as specified and directed. |
| 67 | M&L in replacement for PVC insulated unsheathed copper conductor 1100 V industrial cable 50 sqmm Multi-stranded single core, including connecting with copper lugs 50/95 Sqmm with incoming & outgoing feeder starter to motor connector including taking down old cable complete all as specified and directed |
| 68 | Supply & Fixing in repair for Heating Element copper sheathed and nickel plated 1500 Watt triangular type complete all as specified and directed. |
| 69 | Supply & Fixing in repair for Heating Element copper sheathed and nickel plated 2000 Watt triangular type complete all as specified and directed. |
| 70 | Supply & Fixing in repair for Heating Element copper sheathed and nickel plated 2000 Watt cup type complete all as specified and directed. |
| 71 | Supply & Fix in replacement Thermostat with temperature autocut, 240 volt for water heater, complete all as specified and directed. |
| 72 | M & L in replacement for connecting and testing of CI air release valve 50 mm size with ISI marked flanged type incl jointing material such as fiber board, nut bolt, washers, and welding etc complete all as specified and directed. |
| 73 | M & L in replacement for connecting and testing of CI air release valve 40 mm size with ISI marked flanged type incl jointing material such as fiber board, nut bolt, washers, and welding etc complete all as specified and directed. |
| 74 | Taking out old U/S Water level indicator and supply and fixing FRP scale conventional / Mechanical water level indicator complete with float, wire, float guide pipe , bracket & pulley, counter weight, indicator pin, etc including all accessories all as specified and as directed. |
| 75 | Supply and fixing water testing solution O-TOLODINE bottle 500 ML complete as directed and as approved by Engnr-in-Charge. |
| 76 | Collecting samples of under ground sump water from chaubattia UG Sump 5 lacs, 3 lacs, Highest point pump house for Bacteriological testing and complete Chemical testing for parameters for raw & treated water as specified. Note : The bacteriological and chemical testing of water shall be carried out in Govt authorised laboratory . The item cost includes collecting of samples of water from UG sump and Pump house site and charges of Govt authorised laboratory for carrying out testing of water sample. |
| 77 | Supply & Fixing in replacement galvanised iron ISI marked heavy duty drilled flanged suitable for 80 mm bore pipe line complete all as specified and directed. |
| 78 | Supply & Fixing in replacement galvanised iron ISI marked heavy duty drilled flanged suitable for 100 mm bore pipe line complete all as specified and directed. |
| 79 | Supply & Fixing in replacement galvanised iron ISI marked heavy duty drilled flanged suitable for 150 mm bore pipe line complete all as specified and directed. |
| 80 | Supply and fixing in replacement nuts, bolts and washer for pumping set 12.5/40/75/100HP size as per sample complete all as specified and directed. |
| 81 | S & F mild steel framed work such as grills, gratings etc with ends of bars soldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, mokey caging, and similar work con- forming to Fe.290.Gde-E-165complete all as specified and directed. |
| 82 | Material & Labour for preparation of existing old untreated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm width or girth by cleaning , removing dust and including washing and cleaning etc to receive painting and making good with red lead wherever required and applying two coats of roof paints (Coptic of Jenson & Nicholson or Antisol of Berger or equivalent make as specified in appendix A of particular specification ) complete all as specified and directed. |
| 83 | M & L for preparation of old painted surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete as specified and directed. |
| 84 | M & L in replacement for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high on existing iron/steel surfaces complete as specified and directed. |
| 85 | Material and Labour for repair to electrically driven centrifugal pump set (75/100 HP motor-pump set) including servicing, cleaning, and replacement of water body, kit seal cup, screw ring retainer and burnt out nut, bolts etc of any size and capacity complete all as specified and directed |
| 86 | Material and labour for chart/ poster/ diagram / name plate etc made out of perpex sheet 2 mm thick, of size 2 m x 1.5 m cut to size and shape with colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed by Engineer in charge.Note: The content and size of chart/ poster /diagram / name plate etc shall be given by the Engr in charge during execution of work. |
| 87 | M&L for notice board of size 50x20 cm and written as \\"OUT OF BOUND FOR ALL RANKS\\", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed. |
| 88 | M&L in replacement for notice board of size 50x20 cm and written as \\"NO ADMISSION\\", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed. |
| 89 | Supply and Fix in replacement Star delta Starter fully automatic suitable for 415 V AC for 100 HP Motor, Relay Max Range 150 Amp,Contactor Max Range 125 Amp, including connection and testing complete all as specified and directed Please Enable Macros to View BoQ information |
