|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 3 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 48 shall be reused after cleaning. |
| 4 | Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed |
| 5 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for 10 to 12mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed |
| 7 | M&L for 15 mm smart care ready mix repair plaster is specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed Upto 24 Mtr incl water tank |
| 8 | M & L for 5 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over ceiling surface complete all as specified and directed Upto 24 Mtr incl water tank |
| 9 | Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately). |
| 10 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 11 | M&L for applying two coats of oil bound distemper with roller on new/old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed. |
| 12 | M&L for applying one coats of oil bound distemper with roller on old decorated wall surfaces including preparation of old wall etc complete all as specified and directed. |
| 13 | M&L for applying two coats of cement based paint on new/old plaster surfaces including preparation, complete all as specified. |
| 14 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 15 | M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.UPTO 24 Mtr ht incl over head water tank |
| 16 | M&L for preparation of surface of wall/ceiling and applying two coat of exterior weather proof on 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total) UPTO 24 Mtr ht incl over head water tank |
| 17 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 18 | M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 20 | M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed . |
| 21 | Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.MAKE: Johnson/Kajaria/Somany |
| 22 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 23 | PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection (75 mm thick) laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand and finished even and smooth without using extra cement all as specified. |
| 24 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;in repair complete all as specified and directed. |
| 25 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 26 | M&L for Chequered cementconcrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors with grey pigment cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 27 | M&L Granite 20 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed. |
| 28 | M&L for Providing & applying in any surface Alkaline Rust converting primer APCOREP RUSTREM in two coats conforming to ASTM-B-117 & ASTM-G-60-86 to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 hours. The rust converter shall have a minimum pH of 7.5 and shall be able to convert both hematite and magnetite forms of rust shall pass 400 alternate immersion cycles in 3.5 % NaCl complete all as specifdied and directed |
| 29 | M& L for Providing and applying in any surface(ceiling ,wall etc) anti-corrosive coating APCOREP RUSTCOAT RB (CSIR/CBRI know how) in 2 coats with time interval of minimum 6 hours. The coating shall have ECorr value of -45 mV against SCE in 3.5 NaCL for 100 hours and electrochemical evaluation of max 0.5 mA /cm2. This coating shall be applied over APCOREP RUSTREM coated rebars complete all as specifdied and directed |
| 30 | M&L for Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect as following:- (a) SBR polymer (@ 10 % of cement weight ) modified cementation coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed. |
| 31 | M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed. |
| 32 | S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed. |
| 33 | Taking up or down 15mm bore steel tubing and connection complete all as specified and directed. |
| 34 | Refixing 15 mm bore old steel tubing and connection in new or old position walls, celing ,roof etc |
| 35 | Supply and fixing 15 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed. |
| 36 | Taking up or down 20mm bore steel tubing and connection complete all as specified and directed. |
| 37 | Refixing 20 mm bore old steel tubing and connection in new or old position walls, celing ,roof etc |
| 38 | Supply and fixing 20 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings,roofs or laid in floors. |
| 39 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 40 | S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed. |
| 41 | S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white,with CI 'P' or 'S' trap( 100mm bore )integral foot rests including flush pipe,trap lime cement concrete bedding,including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed by the Engineer-in-charge |
| 42 | S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand , 32 mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm 45gms/40mm-60 gm) and 32 mm PVC flexible waste pipe 800mm long etc complete all as specified and directed |
| 43 | S&F in repairs 15mm borePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair PTMT Waste coupling (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32/40mm bore suitable for wash hand basin and sink complete all as specified and directed. |
| 45 | S&F in repair 32/40 mm dia PVC heavy duty waste pipe for wash basin /sinks complete all as specified and directed. |
| 46 | S&F in repairs 600x450 mm beveled edge moulded looking mirror of 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection incl washers bolt etc. complete all asevity protection and long specified and directed. |
| 47 | S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed |
| 48 | S&F in repair CP grating 100/125 mm dia with hole complete all as spd and directed |
| 49 | S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 50 | S&F in repair 15 mm bore CP Angle valve fancy type with wall flane, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 51 | S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as spd and dir. |
| 52 | S&F in repair 500 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed. |
| 53 | S & F in repair ball valve (float valve) high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (20mm bore dia of pipe ) complete all as specified and directed. |
| 54 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed. |
| 55 | S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 56 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 57 | S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 58 | S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 59 | S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 60 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 61 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 62 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 63 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed. |
| 64 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as per specified and directed. |
| 65 | S&F for 250mm long aluminium sliding door bolt complete all as specified and directed. |
| 66 | S&F for 100mm long aluminium handle cast type complete all as specified and directed. |
| 67 | S&F for 150mm long aluminium tower bolt complete all as specified and directed. |
| 68 | S & F powder coated Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed by Engineer-in-charge |
| 69 | S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,window/ventilator frame, screws and all included fittings like handle ,hinges, .tower bolt etc etc.complete all as specified and directed by Engineer-in-charge. |
| 70 | S&F 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 71 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 72 | S&F in repair 3 mm thick sheet glass, ordinary quality, frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed. |
| 73 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 74 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of old steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 75 | Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof cobvering complete all as specified and directed. |
| 76 | Dismantling structural steel work including doors, gates etc complete all as specified and directed. |
| 77 | S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof gradeW(Gde-E-250)quality-B complete all as specified and directed. |
| 78 | Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W(GdeE-250) quality B . |
| 79 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 80 | S & F Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 81 | S&F for Plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-W complete all as specified and directed. |
| 82 | M&L Reinforced cement concrete (Nominal mix) Type B0 1:2:4(12.5 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed incl necessary demolition |
| 83 | M&L for providing pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed incl neessary demolition. (Note :- Reinforcement shall be measured and paid separately) |
| 84 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed. |
| 85 | M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed. |
| 86 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surfaces of concrete flat. |
| 87 | Dismantling posts or struts(wood, steel or R.C.C.) anysection, including taking out embedded portion and making good disturbed\ ground complete all as specified and directed. |
| 88 | Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces. Please Enable Macros to View BoQ information |
| 89 | Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces. Please Enable Macros to View BoQ information |
