|
| 1 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and directed. |
| 2 | Dismantling glazed tiles/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specified and directed. |
| 3 | M&L in patches (area n.exc 3.00 sqm each patch) for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 4 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 5 | M&L for non skid ceramic tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 6 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles n exc. 0.36 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match over & including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 7 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles n exc. 0.36 sqm set and jointed in vertical surface/ such as skirting and dado etc. set and jointed with neat cement slurry and pointed in colour cement to match over & including 10mm thick rendering in CM (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles of approved shade and pattern 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointed (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 9 | M&L in patches (area n.exc 3.00 sqm each patch) for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer- in-charge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and directed. |
| 10 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 11 | M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 12 | M&L for 18-20mm thick Pre polished kota stone slab flooring over & laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 13 | M&L for 15-16 mm thick Pre polished polished machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and directed. |
| 14 | M&L 75 mm thick PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in plinth protection PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and directed. |
| 15 | M&L for 75mm thick PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and directed. |
| 16 | M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, mud stops, rounded or chamfered on edges, leveling course in floor etc complete all as specified and directed. |
| 17 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed. |
| 18 | M&L in patches (n.exc 3.00 sqm each patch) for 10 mm thick rendering in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 19 | M&L for 10 mm thick rendering in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) all as specified and as directed. |
| 20 | M&L in patches (n.exc 3.00 sqm each patch) for 15mm thick rendering on brick wall surfaces in CM 1:4 finished fair and even with WPC treatment complete all as specified and directed. (Note:- WPC shall be measured & paid seprately) |
| 21 | M&L for 15 mm thick rendering on brick wall surfaces in CM 1:4 finished fair and even with WPC treatment compete all as specified and directed.(Note:- WPC shall be measured & paid seprately) |
| 22 | M&L in patches (n.exc 3.00 sqm each patch) for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 24 | S&F chicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and directed. |
| 25 | Supply only integral water proofing liquid ISI marked complete all as specified and directed. |
| 26 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified and as directed. |
| 27 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces complete all as specified and as directed. |
| 28 | Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified and as directed. |
| 29 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed. |
| 30 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall for rain water pipe including clamp for fixing of pipe in wall complete all as specified and directed. |
| 31 | S& F PVC (SWR) bends any radius 110 mm dia with access door or without access door complete all as specified and directed. |
| 32 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 33 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 34 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 35 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 36 | S&F in repair W.C vitreous china squatting pan orissa pattern of size 580x440mm white with intergral foot rest & P - or S trap,flush pipe complete excluding flushing cistern complete all as specified and directed. |
| 37 | S&F in repair W.C vitreous china, (pedestal patern ) white (excluding flushing cistern and flush pipes ) including seat cover fixing bolt & P - or S trap,flush pipe complete all as specified and directed |
| 38 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 39 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 40 | Fixing only in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 41 | Fixing only in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 42 | Fixing only in repair Brass chromium plated shower rose of 125mm dia size with15mm shower arm complete all as specified and directed. |
| 43 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 44 | Fixnig only in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 45 | S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed. |
| 46 | S&F in repairs bevelled edge mirror of selected quality glass, 6mm thick fixed with chromium plated brass screws and cup washers all as specified and as directed. |
| 47 | S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 48 | Fixing only in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed. |
| 49 | Fixing only in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed |
| 50 | S&F in repair vitreous china wash basin, white/ coloured, flat back of size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe PVC 32mm bore and angle iron brackets of required size and length etc and making good disturbed surfaces to match with the existing complete all as specified and directed. |
| 51 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 52 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 53 | Fixing only in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed. |
| 54 | Fixing only in reapir 15 mm bore brass CP wall mixer for mixing hot & cold water with shower controlled (3 in 1 wall mixer) screwed down for iron pipe and fixed complete all as specified and directed |
| 55 | Fixing only in reapir 15 mm bore brass CP basin mixer for mixing hot & cold central hole screwed down for iron pipe and fixed complete all as specified and directed. |
| 56 | Fixing only in reapir 15 mm bore brass CP sink mixer for mixing hot & cold Screwed down for iron pipe and fixed complete all as specified and directed |
| 57 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 58 | S&F in repair 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight for 25mm ball valves-455gms) complete all as specified and directed. |
| 59 | Material & Labour for providing and fixing stainless steel (Grade 304) railing, door made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 60 | Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 61 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 62 | M&L for brickwork except brick with sub class 'B' bricks, straight or curved on plan (exceeding 6m mean radius) using serviceable old bricks obtained from demolition built in cement mortar 1:6 complete all as specified and directed. |
| 63 | Note For Item no. 40,41,42,44,48,49,53,54,55,56: The scope of this tender is limited to fixing/installation work only. All materials required for the above items shall be supplied by the department under Sch 'B'. Please Enable Macros to View BoQ information |
