|
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed |
| 3 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed . |
| 4 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintel band, beams complete all as specified and as directed |
| 5 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 6 | M&L RCC design mix M-25 (20mm graded aggregate) as in chajjas complete all as specified and directed. |
| 7 | M&L RCC design mix M-25 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs etc complete all as specified and directed. |
| 8 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 9 | Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed |
| 10 | Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed. |
| 11 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed |
| 12 | M&L with subclass 'B' bricks , straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed |
| 13 | M&L Brickwork with Fly ash bricks (Old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 14 | S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed. |
| 15 | M&L TMT bars 5mm dia above upto and including 10mm dia in stirrups,spacersand binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 17 | M&L Rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L Rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L Rendering 5mm thick in cm 1:3 on fair faces of concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for 150mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base complete all as specified and directed. |
| 21 | M&L 100mm thick PCC(1:2:4) type B2 (40mm graded stone aggregate) finishing surface even and smooth using extra cement complete all as specified and directed. |
| 22 | M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 23 | M&L coloured Glazed ceramic tiles in vertical surface 350x250mmx7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match layed over 10mm thick rendering in cement mortar 1:4 complete all as specified. |
| 24 | S&F Vitreous China Urinal size Size: 355 x 340 x 535 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of fixing supply pipe to flushing cistern, trap and waste pipe and waste coupling complete all as specified and directed. Make URS-WHT-13261 of Jaquar or Equivalent in Grohe/kohler/Roca |
| 25 | S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) complete all as specified and directed. |
| 26 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 27 | S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 28 | S&F Vitreous China Wall Hung wash basin with pedestal , white, flat back, size 620x480x185mm including 32 dia waste pipe, waste coupling, chain and plug complete all as specified and directed. Make FNS-WHT-40801 of Jaquar or Equivalent in Grohe/Kohler/Roca |
| 29 | S&F in repair central hole basin mixer for WHB cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.Make : Jaquar Cat Part No CQT-CHR-23167B or Equivalent of Kohler or Grohe |
| 30 | S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make : Jaquar Cat Part No ALI-CHR-85083K or Equivalent of Kohler or Grohe |
| 31 | S&F Rectangular shaped urinal partition with frosted glass of size 900mm X 450 mm and 8mm thick fixed with stainless steel brackets all as specified and directed. Make JSE-CHR-110US450X of jaquar or equivalent in Grohe/Kohler |
| 32 | S&F bathroom Looking Mirror (1500x600x6mm) with frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. Make- Prayag Cat No - CPLM-4 complete all as specified and directed. |
| 33 | S&F 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F 110mm bore UPVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 35 | S&F 75mm UPVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 36 | S&F 75mm UPVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed. |
| 37 | S&F 110mm bore UPVC (SWR) bends any radius complete all as specified and directed. |
| 38 | S&F 110mm bore UPVC (SWR) bends any radius with access door complete all as specified and directed. |
| 39 | S&F 125/110 bore UPVC (SWR) `P’ trap complete all as specified and directed. |
| 40 | S&F Grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms) complete all as specified and directed. |
| 41 | S&F PP-R pipe 20 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete all as specified and directed. |
| 42 | S&F PP-R pipe 25 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete all as specified and directed. |
| 43 | S&F White colored rotational moulded poly-ethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all complete all as specified and directed. |
| 44 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 45 | S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, with P Trap complete all as specified and directed. Make:Cera Cat Part No S1053102 or equivalent model of Parryware/Hindware |
| 46 | S&F 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all including all connection complete all as specified and directed. Make:Cera Covan or equivalent model of Parryware/Hindware |
| 47 | S&F 20 mm dia PPR gate valves,with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 48 | S&F Toilet paper holder stainless steel with flap cover fixed to walls with screws complete all as specified and directed. |
| 49 | S&F 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.Make : Jaquar Cat Part No OPP-CHR-15037PM or Equivalent of Kohler |
| 50 | S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 51 | S & F angle cock, 2 way, with wall flange 15 mm dia complete all as specified and directed.Make :- Jaquar/Grohe/Kohler. |
| 52 | Supply and Fix in repairs Health faucet (Hand shower) with 1 metre flexible tube with wall hook, Chromium Plated as specified and as directed by the Engineer-in-Charge. Make : Jaquar Cat Part No ALD-CHR-573 or Equivalent of Kohler Or Grohe |
| 53 | S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.Make : Jaquar Cat Part No OPP-SSF-15053PM or Equivalent of Kohler or Grohe |
| 54 | M&L for applying two coats of white wash on ceiling surfaces over a coat of primer including preparation of surfaces complete all as specified and directed. |
| 55 | M&L for two coats of interior acrylic emulsion on old/new surfaces of wall over and including one coat of primer and one coat of putty, complete all as specified and directed. |
| 56 | M&L for 1 mm thick wall care putty and one coat of acrylic water-based exterior grade primer @0.9 ltrs (undiluted)/10 sq.mtr diluted with water in 1:1 ratio, applied manually using brush/roller, complete all as specified and directed. |
| 57 | M&L for two coats of water-based premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology, excellent dirt pick-up resistance, low VOC less than 50 g/ltr as per LEEDS specification, anti-algal properties applied in two coats @1.79 ltrs (undiluted)/10 sq.mtr diluted with water as per manufacturer’s instructions. Application to be carried out manually using brush/roller, ensuring uniform surface finish and proper penetration complete all as specified and directed. |
| 58 | Supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 175 (ID)/200(OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.8 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. |
| 59 | M&L for PCC 1:2:4 type B1 as in coping surface channels, benchings etc of manholes finished fair and even complete all as specified and directed. |
| 60 | Cutting into existing manholes for connecting new drains of internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 61 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed |
| 62 | Extra for forming fair finished channel or drain 30cm ginth (inner ginth) in cement concrete using extra cement incl forms, moulds stopped complete all as specified and directed. |
| 63 | S&F brass chromium plated Tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed |
| 64 | S&F SS soap dish complete all as specified and directed |
| 65 | M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole covers etc. all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for 15mm thick in CM 1:3 rendering on fair faces of concrete surfaces /roof top mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note :- Liquid WPC shall be measured and paid separately |
| 67 | M&L for preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush/ pressure hose and applying high performance polyurethene liquid membrane waterproofing coating in two coats @ 1.5 Kg/Sqm/ 2 coats with spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instructions complete all as specified and directed.Note:-(i) The contractor shall submit a guarantee of 10 years the date of completion of work for waterproofing treatment alongwith manufacturer's guarantee. The amount of Rs. 40 (Rupees Forty) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's in the final bill till the expiry of guarantee period. The contractor at his own option may furnish fixed deposit receipt pledged in favour of GE against guarantee money. |
| 68 | Contd/..(ii). The water proofing shall be carried out by authorized applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. (iii) Materials shall be procured from manufacturer/authorized dealer only and original purchase voucher for the full quantity of material shall be procured by the contractor.(iv). The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 69 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including necessary formwork and cutting of joints complete all as specified and directed |
| 70 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being trrmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 71 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 72 | S&F 100 mm long SS butt hinges, complete all as specified and directed |
| 73 | S&F 150mm SS handles, Complete all as specified and directed |
| 74 | S&F 200mm SS barrel tower bolts fixed as specified and directed. |
| 75 | S&F 250mm SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet fixed as specified and directed. |
| 76 | S&F Factorey Fabricated powder coated anodised aluminium frame, for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 77 | S&F Factory Fabricated powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed |
| 78 | M & L Machine cut baroda Green marble stone slab 14 to 16 mm thick laid in steps, jambs, pillars, window cills , cooking platform in 15 mm thick cement screed mortar (1:6) laid and jointed in grey cement slurrry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing complete all as specified and directed. |
| 79 | M & L Machine Cut Granite 14-16 mm thick table rubbed and polished counter top,cooking plateform bedded & jointed with grey cement slurry and pointed with white cement mixed admixture of pigment to match the shade of granite including 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed. |
| 80 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed |
| 81 | M&L for 4 mm thick figured glass pin headed type and glazing with aluminium beading n exc in each pane complete all as specidfied and as directed. |
| 82 | Returning filling in ,including spreading ,levelling, watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed. |
| 83 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge. |
| 84 | Surface dressing nexc 15cm deep and getting out soft and loose soil, complete all as specified and directed |
| 85 | Removing excavated soil exceeding 250 m but n exc 500m distance and depositing where directed at a level n exc 1.5 metre above the starting point . complete all as specified and directed. |
| 86 | Form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 87 | M&L 50mm thick PCC(1:2:4) type B2 (40mm graded stone aggregate) finishing surface even and smooth using extra cement complete all as specified and directed. |
| 88 | M&L for sand cushoning under floor or in foundations including watering and consolidation etc. complete all as specified and directed |
| 89 | M&L machine cut kota stone slab flooring 14-16 mm thick over 20mm thick CM (1:4) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 90 | M&L machine cut kotastone slab 14-16 mm thick in riser of steps, skirting dado and pillar laid over 15mm thick CM (1:4) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 91 | M&L for preparing cement concrete surface, providing 10 mm thick modified plaster in CM 1:4, cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement), applying primer coat of epoxy primer with resin and hardener with water dilution as per manufactirer instructions, applying two coats of polyurethane liquid membrane each coat not less than 500 micron thick UV stable having SRI value equal or greater than 105 with consumption of 0.61 Kg/ Sqm (each coat), 2 nd coat should be applied once 1 st coat is fully dried. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instructions complete all as specified and directedNote :1. Make of material is Asian paints or equivalent as approved. 2. Work to be executed by company Professional and company guarrantee to be ensured by contractor for 7 year time period . |
| 92 | S&F factory made box type steel ventilator with glazing bars dovetailed or welded and fixed with grills with one coat of zinc chromate primer complete all as specified and directed. |
| 93 | M&L for 4.8 mm thick plain sheet glass ,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed. |
| 94 | S&F mild steel, plain, blacksheet, 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed |
| 95 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also astening and fixing complete and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 96 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm, Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete all as specified and directed by Engineer-in-charge. |
| 97 | S&F rolled mild steel Fe-290 (Grade E-165) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 Nos gaps/cuts/holes in each post for providing/laying barbed wire and painting with two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed.Note :- Supply and fix barbed wire shall be measured and paid separately. |
| 98 | Excavating in post holes (or similar holes) each not exc. 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 99 | M&L for point wiring one light/fan point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to match the surface complete incl provn of electrogalvanised steel terminal switch box and 6mm thick Phenolic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc complete all as specified and directed. |
| 100 | All as per item No 98 above but for one 3/5 pin 5 amps socket on independent board with cables o size 2.5 sqmm |
| 101 | S&F switch Piano Flush button single pole one way 5 Amp complete all as specified and directed. |
| 102 | S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC complete all as specified and directed. |
| 103 | M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 104 | S&F MCB DB SPN 4 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure double door type complete all as specified and directed |
| 105 | Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 106 | Supply & fixing MCB , SP, AC, 240 volts 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 107 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 108 | Supply and fixing LED lights fitting miror type with high out put diffuser 2 feet 10 watt 220 v ac decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 109 | Supply and fixing LED bldg security light fitting 35 watt 230v ac outdoor type with high pressure die cst aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed |
| 110 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep wted to common earth point complete all as specified and directed |
| 111 | S&F Lamp holder , PVC/Polycarbonate type with back plate with 10W LED suitable for batten fittings complete all as specified and directed |
| 112 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. |
| 113 | S&F Sub main wiring with two single core PVC insulated , unsheathed multistranded copper cable 4 Sqmm with one single core 4 Sqmm PVC isulated unsheathed stranded copper conductor cable as earth wire in and including PVC conduit (HMS) duly conceled to wal/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified and directed Please Enable Macros to View BoQ information |
