|
| 1 | M&L for applying one coat of oil bound distemper on wall,white or tinted, including prepration of old surface complete all as specified and directed by Engr-in-Charge |
| 2 | M&L for applying two coat of oil bound distemper on wall,white or tinted over a coat of primer, including prepration of old surface complete all as specified and directed by Engr-in-Charge |
| 3 | M&L for applying one coat of oil bound distemper on ceiling, white including prepration of old surface complete all as specified and directed by Engr-in-Charge |
| 4 | M&L for applying two coat of oil bound distemper on ceiling, white including prepration of old surface complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for complete removal of existing surfaces of wall all as specified and as directed by Engr-in-Charge. |
| 6 | Taking down cement plaster on brick walls & concrete surfaces of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Rendering 15mm thick on brick surfaces of wall in cement mortar (1:6), finished even and smooth without using extra cement etc , complete all as specified and directed by Engr-in-Charge |
| 8 | M&L for applying 1-2 mm thick (average thickness) wall care putty on wall surfaces complete all as specified and directed by Engr- in- Charge. |
| 9 | M&L for applying two coat of oil bound distemper on wall including a coat of primer,white or tinted, including prepration of new surface complete all as specified and directed by Engr-in-Charge |
| 10 | M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-In-Charge. . |
| 11 | M&L for applying two coat of oil bound distemper on ceiling ,white or tinted,over a coat of primer including prepration of new surface complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed by Engr- in- Charge. |
| 13 | M&L preparation of old wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed by Engr- in- Charge. |
| 14 | M&L for Rendering 15mm thick in CM 1:4 on brick work, concrete, R.C.C. Surfaces on mumty , parapet or similar surfaces at any height finished even and fair without using extra cement of ,up to height 12 mtr , complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L Preparation of new plastered surface of wall/ceiling/beam/chajja surfaces and applying two coats of weather coat paint over a coat of cement primer complete all as specified and directed by Engineer-In-Charge. |
| 16 | M&L Preparation of old plastered surface of wall/ceiling/beam/chajja surfaces and applying two coats of weather coat paint complete all as specified and directed by Engineer-In-Charge. |
| 17 | M&L for removal of paint/putty etc from the wall using mechanical means as per manufacturer instructions. Hacking of existing plastered surfaces upto 2mm. Note:- The wall treatment shall be done on hacked/new cementous surface for proper bonding & requsite results Surface to be treated shall be passed by Engr-in-Charge. (a) Take Poly plastic fibre/Eazeecoat Ultra adhesive and white cement in equal proportion & add 25% H2O in it to make the mix as per manufacturer instructions. Apply 2 coats of wall bind adhesive mixture to the wall using a roller & brush.(b) Final & top coat apply with mixing ratio of poly plastic fibre/ Eazeecoat Ultra top coat & water & white cement as per manufacturer instructions. For ser No 17 & 18Note:- The poly fibre plastic/Eazeecoat Ultra should have following characterstics :-(a) Resists positive hydrostatic presure of upto 14 bars.(b) Crack filling ability upto 45 mm.(c) Temp control upto 14 degree celcious on any surface like concrete roof, metal shed & for walls also.(d) High durablity to water,fire & UV rays covering climate condition to + 55 degree celcious.Make : Nerolac Perma/ European Paints & Chemicals/ Ever Paint. |
| 18 | All all as per item no 17 here-in-before but treatment over the plastered surface of wall including cleaning. |
| 19 | S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls , laid in trenches, floors.etc complete all as specified and directed by Engineer-In-Charge. |
| 20 | S&F in repair for 110mm PVC (SWR) T equal and unequal complete all as specified and directed by Engineer-In-Charge. |
| 21 | S&F in repair for 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-In-Charge. |
| 22 | Taking up or down 15 mm bore steel/ kitek tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and directed by Engineer-In-Charge. |
| 23 | S & F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, surface ,cansealed, ceiling or laid in floors complete all as specified and directed by Engineer-In-Charge. |
| 24 | Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor or fixed to wall complete all as specified and directed by Engineer-In-Charge. Note : Old pipe obtained from Srl item No. 22 shall be used after cleaning. |
| 25 | Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and directed by Engineer-In-Charge. |
| 26 | S & F Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed by Engineer-In-Charge. |
| 27 | Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling complete all as specified and directed by Engineer-In-Charge. Note : Old pipe obtained from Srl item No. 25 shall be used after cleaning. |
| 28 | Cutting holes exc half brick not exc one brick into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer-In-Charge. |
| 29 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc. 10cm but n. exc 20cm girth complete all as specified and directed by Engineer-In-Charge. |
| 30 | M&L for Ist quality Digital Glazed ceramic coloured tiles in vertical surface 300mmx450mmx8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, including 10 mm thick backing coat in Cement Mortar 1:4, including dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge.Note : - Contractor will produced test certificate of the company. (Make:- Orient, Kajaria, Somany or equivalents) |
| 31 | M&L for Ist quality Non-skid Matt finish Ceramic coloured tiles 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in Cement Mortar 1:6 and dismantaling floor hearth or wall tiling including cement mortar bedding removal of rubbish off the premises, debris away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. Note : - Contractor will produced test certificate of the company.(Make:- Orient, Kajaria, Somany or equivalents) |
| 32 | M&L for vitrified ceramic tiles double charged 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over and including screed bed 15 mm thick in cement sand mortar 1:4 complete dismantling of existing tiles and removal of rubbish off the premises, debris away from site to a designated point by local administration or a distance upto 1.5 km from site complete all as specified and directed. |
| 33 | M&L 18-20 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed 15mm thick screed bed in Cement Mortar 1:4 including dismantaling, removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for machine cut kota stone slab flooring,skirting 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in cement mortar 1:6, dismantaling, removal of rubbish off the premises debrish away from site to a disignated point by local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge. |
| 35 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including connection to drain and flushing pipe antisyphonic pipes etc complete all as specified and directed by Engr-in-charge. |
| 36 | S&F in repairs PVC syphonic action type flushing cistern 10 lts capacity ,low level with inlet ,ball valve float and bracket with complete fitting complete all as specified and directed . |
| 37 | S&F in repairs 15 mm Bib taps long body (Fancy type) cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore fixed in repairs complete all as specified and as directed. |
| 38 | S&F in repairs 15 mm fancy type angle valves cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specifed and as directed. |
| 39 | S&F in repairs Vitreous china table top wash hand basin ,including CP waste coupling and waste pipes etc Complete all as specifed and as directed. |
| 40 | S&F in repairs 15 mm dia Single lever Basin Mixer without popup waste with 450mm long all as directed by Engr-in -Charge. |
| 41 | S&F in repairs 15 mm dia Single lever sink Mixer without swinging spout on upper side (wall mounted model) with connecting legs and wall flange complete all as directed by Engr-in -Charge. |
| 42 | S&F in repairs 15 mm dia wall Mixer (two-in-one) Non-telephonic shower arrangement with connecting legs and wall flanges complete all as directed by Engr-in -Charge. |
| 43 | S&F pegs set of 6 nos Powder coated stainless steel body fixed with chromium plated cadmium screwes complete all as specified and as directed |
| 44 | S&F 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 45 | S&F sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and waste coupling and PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm ,thickness 3-4mm,500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair PVC connection 15 mm size with PTMT nuts of lengh 450 mm long complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repairs of 25 mm SS Harrison rails (Curtain rod) , with fixing brackets, stops, rollers, doms, wall to wall , finel etc , of thickness 20 gauge complete all as specified and as directed . |
| 48 | S&F in repair health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 mtr length complete all as directed by Engr-in -Charge. |
| 49 | S&F in repairs Plastic water closed seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repairs Chromium plated shower with shower roses swivel shower brass chromium plated with arm 100 mm size for fixing with 15 mm pipes with swivel joints ,any size including fixing to steel pipes or union complete all as specified and directed by Engr-in-charge. |
| 51 | Hacking out old broken glass (any thickness) from wooden/steel frames, glazed with putty of fixed with screws complete all as specified & directed by Engr-in-charge. |
| 52 | S&F Sheet plain glass 4 mm thick, glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 53 | S&F Figured glass, pinhead type and glazing with oil putty in square exc. 0.5 Sqm in each pane of thickness 4 .0 mm complete all as specified & directed by Engr-in-charge. |
| 54 | S&F in repairs PVC cabinet mirror, size 400 mm X 500mm of selected quality as specified and directed . |
| 55 | M&L opening and closing for AC including Cutting hole of brick work including M& L for brick work built in cement mortar 1:6 with sub class 'B' bricks including plaster 15 mm thick in cement mortar 1:4 , pointing and including finishing the surface to existing matching colour to old surafces and opening. |
| 56 | M&L for disconnecting of PVC tank of capicity exc 500 Ltr but n. exc 1000 litres for cleaning all as specified - (a) Dewatering &Removing all settled silt ,scale & Dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hours. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Refixing the tank in same position or raised /lower height after cleaning or water complete as directed by Engr-in- charge. |
| 57 | S & F in repair white colour rotational moulded polyethylene water storage tank triple layered (Cylindrical vertical with threaded close top), HDPE of 1000 ltrs capacity with inlet & outlet connections, 20mm dia PVC float valve with ball including all fittings, tank nipple 150 mm long with washer & plug, with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 1000 litre. Make : ISI marked of Sintex/Polytuf/Polycon |
| 58 | S & F in repair white colour rotational moulded polyethylene water storage tank triple layered (Cylindrical vertical with threaded close top), HDPE of 500 ltrs capacity with inlet & outlet connections, 20mm dia PVC float valve with ball including all fittings, tank nipple 150 mm long with washer & plug, with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre. Make : ISI marked of Sintex/Polytuf/Polycon |
| 59 | S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed. |
| 60 | S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 15mm bore complete all as specified and directed. |
| 61 | S&F In repairs CP Towel rail 600 mm long all as specified and directed by Engineer-in-Charge. |
| 62 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each |
| 63 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each |
| 64 | Taking down shutters of any description exc 1 sqm and n. exc. 2 Sqm each and removing to or from store complete all as specified & directed by Engr-in-charge. |
| 65 | Taking down shutters of any description exc 1 sqm and n. exc. 2 Sqm each and refixing in same opening complete all as specified & directed by Engr-in-charge. |
| 66 | Resecuring, or easing & adjusting of shutters of any description exc 1 sqm and not exc. 2sqm each without taking down complate all as specified and as directed |
| 67 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 68 | M&L for Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing. |
| 69 | M&L Factory made single extruded WPC (wood polymer composite) solid decorative door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 70 | M&L Factory made single extruded WPC (Wood Polymer Composite) solid laminated flush type as in shutter or exposed member of cupboard shutter of 18mm thick with Balancing on one face and wooden grain pattern lamination on exposed surface with and including 18 mm wide 0.8 to 1 mm thick PVC leaping on exposed face to match with shade of shutter fixed with suitable solvent comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, in and including dismantling of old board/Cup board shutter any description fixed in any postion with nails, complete all as specified and directed by Engr-in-Charge. Note : Nothing extra for MS Grill, Glass panes & SS Jali Shall paid against this item. |
| 71 | S&F in repair continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps when open 30mm fixed complete all as specified & directed by Engr-in-charge. |
| 72 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section. Length of bolt is 150mm complete all as specified & directed by Engr-in-charge. |
| 73 | S&F 100 mm butt hinges Medium weight ,cold rolled mild steel and fixed complete all as specified & directed by Engr-in-charge. |
| 74 | S&F 150 mm aluminium handles cast type anodised complete all as specified & directed by Engr-in-charge. |
| 75 | S&F in repairs Brass mortice lock 4 lever vertical type size 100 mm long complete all as specified & directed by Engr-in-charge. |
| 76 | S&F in repairs floor door stopper 140 mm of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed in floor complete all as specified & directed by Engr-in-charge. |
| 77 | S&F 150 mm size hasp and staple safety type aluminium anodized complete all as specified & directed by Engr-in-charge. |
| 78 | S&F in repairs Door seal fixed to wooden doors complete all as specified & directed by Engr-in-charge. |
| 79 | S&F in repairs 40 mm dia cupbords knobs fixed with nut screwes and washer of mild steel bright complete all as specified & directed by Engr-in-charge. |
| 80 | S&F in repairs magnetic catches for kitchen cabinet and cupbords complete all as specified & directed by Engr-in-charge. |
| 81 | M&L for welding in repairs exc 2.5 cm but n. exc. 5 cm in length, thickness of metal to be welded exc 6 mm but n. exc. 9mm complete all as specified & directed by Engr-in-charge. |
| 82 | M&L for repairs to sliding aluminium door, aluminum grills , glass , mortice lock and roller plate by taking down complete door and fittings including replacing old u/s components by providing new fittings etc. and refixing the same in old position and making good to the disturbed surface complete ( cost of rubber packing, woolen gasket , aluminium beading, stainless screws, roller for sliding shall be included in basic cost of repair) all as specified & directed by Engr-in-charge. |
| 83 | S&F in repairs waste pipe sink and wash hand basin 32 mm dia Low Density polyethylene pipes (LDPE) of pressure rating 6 kg /cm 1 metre long fixed to walls complete all as specified & directed by Engr-in-charge. |
| 84 | S&F three track aluminium section with locking arrangement extruded anodised aluminium section in windows (Powder coated in any colour as approved by GE) with movable, openable or moving type shutter or any pattern as directed, aluminium section including handle ,tower bolt (medium weight of series -B) or size as directed, cut to size,locking arrangment , jointed together including rubber beading and all necessary fitting complete all as specified and directed. Note : Glass pane measured and paid seperately. |
| 85 | Providing and fixing factory made uPVC white colour sliding window three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm),sliding sash (42mm x 67mm). sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) |
| 86 | Providing and fixing factory made uPVC white colour sliding window three track area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm),sliding sash (42mm x 67mm). sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) |
| 87 | S&F sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 Sqm in each pane, thickness in 5 mm complete all as specified & directed by Engr-in-charge. |
| 88 | S&F in repairs 75 mm dia cast iron FLOOR TRAP/NAHANI TRAP ,with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & directed by Engr-in-charge. |
| 89 | S & F in repairs 18/19 mm marine plywood of make green ply/ century ply kit ply boiling water proof and moisture resistant with laminate (Plain white) with inside of 0.6mm & outside face 1.00 mm laminate of glossy finish, complete all as specified & directed by Engr-in-charge. |
| 90 | S & F in repairs 19 mm thick HDHMR board as in kitchen panel shutters using 1.00 mm thick decorative laminate glossy finish of make like spacewood/ INOPAN/PARACASA or equivalent of grade of boiling water proof and moisture resistant, complete all as specified & directed by Engr-in-charge. |
| 91 | S &F in repairs soft close auto hinges of make Hettich kaff for fixing kitchen panel shutters, complete all as specified & directed by Engr-in-charge. |
| 92 | S & F in repairs Handle G profile stainless steel all drawers of suitable size as per size of each shutters, complete all as specified & directed by Engr-in-charge. |
| 93 | S&F in repairs kitchen drawers made out of 19 mm thick HDF (with 10 yrs warrenty) of make like Spacewood / INOPAN/ PARACASA boiling water proof and moisture resistant) , complete all as specified & directed by Engr-in-charge. |
| 94 | M &L for repairs/replacement of buckets of stainless steel grade 304 with PVC Coating and diffrence size and shape with all accessories as approved by Engr-in-Charge, complete all as specified & directed by Engr-in-charge. |
| 95 | S&F in repairs high precision soft closed telescopic channels (1sets per drawers of make Kaff, Hettich, Hafele or equivalent as approved of 45 kg capacity to meet the weight requirement with him length 20 inches to ensure smooth movements of drowers, complete all as specified & directed by Engr-in-charge. |
| 96 | Cutting of bushes /piple small tree protuding over wall survace/Roof surface/terrace of building of height upto 10.0 metre including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site, complete all as specified and directed by Engr-in-Charge |
| 97 | Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L Formwork to chullah hoods, chajjas,facia, troughs and similar, items in cluding edges,including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge. |
| 100 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L Providing and injecting chemical emulsion for post constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge. |
| 102 | M&L Providing and injecting chemical emulsion for post constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge. |
| 103 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Roof/Chhajja trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) , fixed with using dead fastern of 150mm long , including distance pieces, cleats doors/gates and like of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing. |
| 104 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (any shape, pattern) 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge. |
| 105 | M&L for Cleaning of entire floor, skirtings, wall tiles, doors, windows, cupboards, kitchen cabinet and all furnitures by removing all dusting, splices, grease etc and including layout of all furniture in position upto the entire satisfaction of Engr-in-charge complete all as specified and as directed. |
| 106 | Removal of Debris /demolished material out of MOD land upto 5KM from the starting point of collection complete all as specified and as directed. |
| 107 | Taking down carefully of point wiring (Light , fan, socket or power complete fittings such as switches,Ceiling roses, pendants, regulator, sockets, Bell push) removing from site of work and making good to the disturbed surfaces of walls/floors etc complete all as specified and directed. NOTE :- Taking down of Light fitting, MCB, DB etc to be measured and paid separately. |
| 108 | Taking down carefully by submain wiring/service connection of any complete all as specified & directed. |
| 109 | Taking down carefully DB box of any sizes & capacity complete all as specified and directed. |
| 110 | M&L for Concealed Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLSH) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic UPVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush metal boxes 0.8 mm thick (Same as Switches Make) suitable for modular fittings including modular outer cover plate with inner mounting frame as per site requirement for mounting modular switches, sockets etc including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 Sqmm size in green colour including making good(i.e plastering, one coat of putti and two coats of old bound distemper with matching existing surface) for One light/fan point controlled by one switch complete all as specified and directed in current SSR Part-I & II all as directed, as described below :- |
| 111 | All as per Srl item No. 109.00 here-in-before, but One 3-pin socket outlet 5 Amp on independent board. |
| 112 | All as per Srl item No. 109.00 here-in-before, but One 3 pin socket outlet 5 Amp on same board |
| 113 | All as per Srl item No. 109.00 here-in-before, but One light point controlled by 2, two switches |
| 114 | All as per Srl item No. 109.00 here-in-before, but One bell point controlled by one switch |
| 115 | All as per Srl item No. 109.00 here-in-before, but 2.5 Sqmm copper conductor cable and 2.5 sqmm PVC insulated standard copper conductor complete FRLS cable as continuous earth wire all as specified for One 3 pin socket outlet 15 Amp on independent board. |
| 116 | M&L for Sub main wiring with two single core PVC insulated unsheathed stranded copper conductor FRLS cable 6 Sqmm and including UPVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 6 sq mm as earth wire, connected to common earth dolly and all metal part/main switch including making good disturbed surface (i.e plastering ,one coat of putti and two coates of OBD paint ) complete all as specified and directed . all as specified and directed. NOTE :- Two run of 6 Sqmm (phase+ Neutral) + One run of 6 Sqmm for earth wire + One run of PVC conduit shall be measured as one RM. |
| 117 | M&L for Sub main wiring with two single core PVC insulated unsheathed stranded copper conductor FRLS cable 2.5 Sqmm and including UPVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 2.5 Sqmm as earth wire, connected to common earth dolly and all metal part/main switch including making good disturbed surface (i.e plastering ,one coat of putti and two coates of OBD paint ) complete all as specified and directed . all as specified and directed. NOTE :- Two run of 2.5 Sqmm (phase+ Neutral) + One run of 2.5 Sqmm for earth wire + One run of PVC conduit shall be measured as one RM. |
| 118 | S&F in replacement of modular switch, 1 module single pole one way 6 Amp complete all as specified & directed. |
| 119 | S&F in replacement of modular switch, 1 module single pole one way 16 Amp complete all as specified & directed. |
| 120 | S&F in replacement of modular switch, 1 module single pole two way 6 Amp complete all as specified & directed. |
| 121 | S&F in replacement of modular Bell push , 1 module 6 amp single pole one way complete all as specified & directed. |
| 122 | S&F in replacement of Socket outlet 3 pin 6 amp multipurpose, modular type, 2 module complete all as specified & directed. |
| 123 | S&F in replacement of Socket outlet 3 pin 6/16 Amp multipurpose, modular type, 2 module 240 volt complete all as specified & directed. |
| 124 | Supply and fixing in replacement MCB protected modular socket with Modular MCB 16 Amps built in MCB+ Socket 16 Amps with concealed metal sheet steel enclosure( same as per socket make ) with inner mounting frame and outer modular cover for mounting complete including making good disturbed surface (i.e plastering ,one coat of putti and two coats of OBD paint ) complete all as specified and directed . |
| 125 | S&F in replacement of Ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified & directed . |
| 126 | S&F in replacement of Bell ding dong, Type AC 230 volts, 50Hz, Single Phase, complete all as specified & directed. |
| 127 | Supply and fixing in replacement MCB double pole 40 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. |
| 128 | Supply and fixing in replacement MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. |
| 129 | Supply and fixing in replacement MCB DB Single pole and neutral 12 way,concealed in wall, sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed . |
| 130 | Supply and fixing in replacement of wall mounted fittings with ABS housing and clear polycarbonate cover including retrofit LED bulb 09 watt conforming to city-1/city-2 including making connection with flexible copper 3 core cable 0.5Sqmm from connector/ ceiling rose to fitting complete all as specified and directed. |
| 131 | S&F in replacement of LED batten four feet ,1200 mm length ,polycarbonate body ,20 Watt,100 Lumen/watt ,Total Lumen 2000 ,cool day light fixed on wall including cord cable 0.50 Sqmm 2 core upto 300 mm length all as specified and directed. |
| 132 | S&F in replacement of LED batten Two feet ,600 mm length ,polycarbonate body ,10 Watt,100 Lumen/watt ,Total Lumen 1000 ,cool day light fixed on wall including cord cable 0.25 Sqmm 2 core upto 300 mm length all as specified and directed. |
| 133 | S&F in replacement of LED Bulk head Luminaire made of pressure die cast aluminium hosing with protcted diffuser 10 watt system wattage ,colour temp 6500K,Lumen efficacy 100 lumen/watt,Total Lumens output 1000, PF >0.9 complete all as specified and directed. |
| 134 | S&F in replacement of LED batten one feet ,300 mm length ,polycarbonate body ,5 Watt,100 Lumen/watt ,Total Lumen 500 ,cool day light fixed on wall including cord cable 0.25 Sqmm 2 core upto 300 mm length all as specified and directed. |
| 135 | S&F in replacement of LED building security light fitting 30W powder coated, pressure die cast aluminium body and polycarbonate cover with individual LED lense having colour temperature 6500 +/- 500, PF >0.90 having system efficiency 2400 lumen with all accessories such as connection, nut and bolt etc, complete all as specified and directed. |
| 136 | Supply and fix in repair exhaust fan 150 mm sweep at outer wall, 250 CMH, 22W, 1800 RPM, ABS plastic Body along with inbuilt PVC louvers (same make as Exhaust fan) PVC mesh net at inner wall complete suitable to work on AC, single phase, 230 Volts, 1100 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm upto 1 metre including making good disturbed surface i.e plastering, one coat of putti and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed. |
| 137 | Taking down the ceiling fan including down rod of any sweep carefully from its installed position, dismantling complete for spray painting of fans complete,upper and lower canopy,fan box cover and hanging / refixing in position after civil work with suitable down rod upto 3 feet complete all as directed. |
| 138 | Making Round Boring of size suitable for 150 mm sweep exhaust fan including making good disturbed surface (i.e plastering, one coat of putti and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed. |
| 139 | Supply and fixing Motar starter red and green switch ,2 Module ,16 Amps with concealed metal sheet steel enclosure with inner GI frame with outer modular cover for mounting complete and making good disturbed surface i.e plastering, one coat of putti and two coats of old bound distemper paint with matching existing surface) complete all as specified and directed. |
| 140 | Supply and fixing PRCD Top plug 3 Pin 16 Amps, 30 Ma all as specified and directed. |
| 141 | Note :- Amount of credit of Rs. 37900.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
