|
| 1 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in Hard/dense soil complete all as specified and directed. |
| 2 | M&L for Hard core of gauge n.exc 63mm, with broken stone aggregate, deposited,spread and levelled in layers n.exc 15 cm thick, watered to a true surface complete all as specified and as directed. |
| 3 | M&Lfor plain cement concrete, type D2, (1:4:8), using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and as directed. |
| 4 | M&L for Reinforced Cement Concrete nominal mix (1:2 :4) type B1 (Using 20mm graded stone aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span including necessary form work complete all as specified and directed. |
| 5 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing ,hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 6 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 7 | Material and labour for Pre-cast cement concrete block 1:3:6 type C1 (using 20 mm graded aggregete) masonary with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified & directed. |
| 8 | M&L Rendering 15mm thick on brickwork or concrete surfaces on fair face of brickwork or concrete surfaces in CM (1:6) finished even & smooth (without using extra cement) complete all as specified and directed. |
| 9 | M&L Rendering 15 mm thick cement plaster in CM 1:4 on brick or concrete surface on other than fair faces of wall finished even and fair without using extra cement complete all as specifed and directed. |
| 10 | M&L Joint free coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and incl 15 mm rendering in CM 1:4 complete all as specifed and as directed. |
| 11 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 20 mm thick screed bed or bedding in CM 1:4 complete all as specified and as directed cement to match complete all as specifed and as directed. |
| 12 | M & L for rubber moulded coloured chequered cement concrete tiles 30cmx 30cm x 25mm set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in 1:6 cement mortar complete all as specified and directed. |
| 13 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub-base complete all as specified and as directed. |
| 14 | S&F Rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290 (Gde E-165) complete all as specified and directed. |
| 15 | S & F Pre- painted coloured galvalume GI based profiled steel sheet 0.50mm thick having 0.45mm thick base metal thickness and zincalume (Aluminium,Zinc & Silicon coating) AZ 150,min150 gm/Sqm,having tensile strength of 550 Mpa & Profiled with pitch distance 195-200 mm c/c and rib depth 28 to 32 mm fixed as in roof covering/cladding to wall,by using self tapping screws/J hooks as directed by Engr-in-Charge. |
| 16 | S & F steel ventilator with top hung shutters including hinges with steel handles and steel peg stay complete all as specified and directed. |
| 17 | S&F 4mm thick Figured glass sheet ordinary quality and glaging fixed to window n,exc 0.5 Sqm in each pane complete all as specified and directed. |
| 18 | S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm PVC sheet single side prelaminated & edges will be painted to match, reinforced with MS Square tube jointed, supplying and fixing in opening complete all as specified and directed. |
| 19 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edgesconsisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 20 | S&F Butt hinges, cold rolled mild steel, and fixed medium weight 100mm long complete all as specified and directed. |
| 21 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as specified and directed. |
| 22 | S & F Aluminium handles, cast type, anodised 100mm size all as specified and directed. |
| 23 | S&F 250mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 24 | S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks (Cylindrical vertical with closed type) hoisted and fixed in position including 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, tank nipple, gate valves in inlet and outlet complete all as specified and directed. |
| 25 | S&F bib tap 15 mm bore cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass female complete all as directed. |
| 26 | S&F 15 mm bore stop valves/angle valves cast copper alloy fancy type , chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified and directed. |
| 27 | S&F 20 mm bore steel water tubing medium grade laid in trenches complete all as specified and directed. |
| 28 | S&F GI tubing 15 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks, and wooden plugs etc. or laid in floors complete all as specified and directed. |
| 29 | S&F of PVC (SWR) pipes of 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 30 | S&F of PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. |
| 31 | S&F vitreous chaina squating pan orissa pattern size 580x440 mm white with integral foot rest complete including lean concrete in bedding connecting to flushing pipe , anti symphonage pipe etc complete all as specified and directed. |
| 32 | S&F 110 mm Traps ‘P’ or ‘S’ including jointing with solvent cement complete all as specified and directed. |
| 33 | S&F 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float, PVC long bend and handle complete all as specified and directed. |
| 34 | S&F PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and directed. |
| 35 | M&L 50mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection, or coping complete all as specified and directed. |
| 36 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | M&L for 2nd class hard wood fillet square or rectangular in section clean sawn screwed with nails or beads of sectional area exc 13 Sqcm but not exc. 25 sqcm including taking out the existing complete all as specified and directed |
| 38 | M&L for 12 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and directed. |
| 39 | M&L for two coats of synthetic enamel paint on new steel surfaces of any description exc. 10 cm width or girth including preparation of surfaces including one coat of red oxide primer complete all as specified and directed. |
| 40 | M&L for applying two coats of distemper oilemulsion, white or tinted on new wall surface including preparation of surface complete all as specified and directed. |
| 41 | M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed. |
| 42 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 43 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 44 | M & L for point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core stranded copper conductor for one light/fan and including metallic rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) |
| 45 | S& F switch piano 1 way, 6 Amps, complete all as specified. |
| 46 | S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.. |
| 47 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed. |
| 48 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by EIC. |
| 49 | S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 6 ways with IP42 protection complete all as specefied and directed. |
| 50 | S&F MCB SPN, 240 volts,32 amp, 16 KA rupturing capacity for fixing in DBs of including proper thimble connections complete all as specefied and directed. Make:Schenider, Seimens,Legrand |
| 51 | S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. Make:- Indo Asian,standard, havells.Make:Schenider,Seimens,Legrand |
| 52 | S & F LED Bulk Head fitting ,complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as pecified and directed. Make:Havells,Philips,C&S |
| 53 | Supply and fixing in replacement of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete crompton or equivalent in Havell's,/Bajaj complete all as pecified and directed. |
| 54 | Supply, laying and testing cable XLPE 16 sqmm 4 core Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of approved size including excavation in any kind of soil/rock, sand cushioning (8cm thick before laying the cable and 15 cm above the cable), protective covering (laying sub class B bricks in flat), returning filling of trench and removal of surplus soil upto 50 m distance complete all as specified and directed. |
| 55 | Supply and fix on pole / wall or lay in trenches under road / drain crossings etc., for drawing cables, GI pipe light grade , ISI marked ,of following sizes including necessery pipe ,fittings ,clamps, bolts , nuts etc., complete all as specified and as directed :-50 mm dia |
| 56 | M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less 2.25 meters deep below ground level) with top edge of the plate not less than1.5 meter below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 connected to earthing test point including earth pit and CI cover complete all as directed and specified including testing on completion complete all as pecified and directed. |
| 57 | S & F for Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable including PVC casing caping 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified and directed by Engineer-in-Charge. |
| 58 | S & F MCCB 4 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as pecified and directed. |
| 59 | S & F 3-layer PP-R (Polypropylene random copolymer) pipe of size 20mm SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability forhot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as pecified and directed. |
| 60 | S & F PP-R Gate valve of size 20mm (brass insert) as per requirement of the site complete all as pecified and directed. Please Enable Macros to View BoQ information |
