|
| 1 | Dismantling posts or struts(wood, steel or R.C.C.) anysection, including taking out embedded portion and making good disturbed\ ground complete all as specified and directed. |
| 2 | Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces. |
| 3 | M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | S & F angle iron as in post and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified. |
| 5 | Supply only GI chain link fencing (weight not less then 2.4kg/sqm)including line wires to any type of standards, rails, straining bolts, etc. complete all as specified and directed.Note :- Line wire and flat iron will be measured and paid separately |
| 6 | Fixing only GI chain link fencing including line wires to any type of standards, rails, straining bolts, etc. including provission of flat iron for securing with post and taking down existing chain link fencing complete all as specified and directed.Note :- Line wire and flat iron will be measured and paid separately |
| 7 | S&FMild steel screw bolts (machine made) with hexagonal or squareheads at one end and screwed the other, or screwed both ends, eachscrewed end to be fittedwith washers and one hexagonal or squarenut, exc 5cm but n exc 10cm long and 08to 20 mm diameter of neck complete all as specified and directed. |
| 8 | S&F MS deformed bars 10 mm dia and above cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 9 | S&F in repair galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. |
| 10 | M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed by Engineer in Charge |
| 11 | M&L Nominal mix Type B-1 1:2:4 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc all as specified and directed. |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed. |
| 13 | M&L Nominal mix Type B-1 1:2:4 (20 mm graded stone aggregate) as in column all as specified and directed. |
| 14 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 15 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 16 | Ditto, but 6mm to 8 mm dia all as specified and directed. |
| 17 | M&L for two coat of sythetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and |
| 18 | M&L for one coat of sythetic enamel paint on previously treated/ un treated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directed. |
| 19 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. |
| 20 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including complete all as specified and directed. |
| 21 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 22 | M&L for 10 to 12 mm smart care ready mix repair plaster is a specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers wihich can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed |
| 23 | Material & Labour for preparing newly plastered surfaces of wall, applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm of wall complete all as specified and directed. |
| 24 | M & L for applying one coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or unplastered surfaces of walls or concrete including preparation of surfaces at any height (not.exc8 mtr) complete all as specified and directed. MAKE : Asian/ Berger/ Kansai Nerolac |
| 25 | Providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 26 | M&L for PCC 1:2:4 type B2 (20mm graded Agg) 40mm thick as in surface channel and drains manhole etc including Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar. all as specified and directed |
| 27 | Dismantling stone slabs and tiles of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge |
| 28 | M&L Granite 20mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 29 | Dismantling of wrought iron of mild steel work of any description not otherwise poivided |
| 30 | S&F Framed work such as grills, gratings,ms mesh etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe.290.Gde-E-165 for ornamental and intricate design complete all as specified and directed Please Enable Macros to View BoQ information |
