|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work : REPAIR TO BOUNDARY WALL, PEDESTRAIN, HARD STANDING FOR CERTAIN LOCATIONS IN DOMESTIC AREA AT AF STATION PHALODI Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed. |
| 3 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling & mass concrete complete all as specified & directed. |
| 4 | M&L for Squared rubble walling, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 5 | Refixing of demolition stone walling of Squared rubble walling, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L rendering 10mm thick in CM 1:6 on fair faces of stone masonry surfaces finished even & smooth w/o using extra cement complete all as specified & directed. |
| 7 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. |
| 8 | S&F mild steel gate ornamental design with pintel hinges and complte fittings Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 9 | M&L painting to preapring steel surfaces and painting two coat of Synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 10 | S & F 40mm thick CNC cutting designer Jodhpur sandstone 2D jali , of approved colour, design & pattern exceeding 0.50 sqm area and not exceeding 2.00 sqm of uniform colour of each stone jali fixed with drilling hole for hold or set in cement mortar 1:4 complete all as specified and as directed. Note: Pattern/design/colour of Jodhpur jali to be approved by GE. |
| 11 | S & F Dholpur stone type elevation tiles in vertical surfacesuniform colour of each stone tiles size exceeding 0.09 sqm area and not exceeding 0.5 sqm set and jointed in neat cement slurry and pointed in white or coloured cement, incl backing coat of 10 mm thick in CM 1:3 all as specified and directed. |
| 12 | Dismantling stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortarts complete all as specified & directed. |
| 13 | M&L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified & directed. |
| 14 | M&L for providing 100mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors and pavings etc. complete all as specified & directed. |
| 15 | M&L for non-skid,scracth resistance ceramic parking coloured joint free tiles 10 to 12 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm, in in footparth, parks, lawns, drive ways or light traffic parking etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and as directed.Note: Pattern/design/colour of outdoor tiles to be approved by GE. |
| 16 | Demolition of unreinforced Concrete and pavings n exc 15 cm thickness and disposed off from site complete all as specified & directed. |
| 17 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature and chamfered, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. |
| 18 | M&L two coats of synthetic enamel paint (ordinary tint) on plastered surfaces of any description over 10 cm width or girth, not otherwise described over a coat of priming coat plaster coat including preparation of new surface complete all as specified and directed. |
| 19 | M&L for RCC type B1 1:2:4 (20mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified & directed. |
| 20 | M&L for RCC type B1 1:2:4 (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified & directed. |
| 21 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified & directed. |
| 22 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions for square, rectangular or polygonal rough finished surfaces of concrete complete all as specified & directed. |
| 23 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 24 | All as per item No. 22 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed. |
| 25 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
