|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair /Replacement pipe lines, control valves, sluice valves and connected works at Tawi, Old MH Area, 37AMSD Area and Mukherjee Enclave under GE (Utilities) Udhampur. Contract No: GE/U-50/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 4 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking up or down old unseviceable GI pipe of size 100 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking up or down old unseviceable GI pipe of size 80 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking up or down old unseviceable GI pipe of size 50 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 9 | Taking up or down old unseviceable GI pipe of size 40 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking up or down old unseviceable GI pipe of size 25 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking up or down old unseviceable GI pipe of size 20 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking up or down CI/DI/MS water mains pipe 300 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engineer-in-Charge.(Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates. |
| 13 | Description all as per ser item No 11.00 here-in-before, but of size 250 mm dia. |
| 14 | Description all as per ser item No 11.00 here-in-before, but of size 200 mm dia. |
| 15 | Description all as per ser item No 11.00 here-in-before, but of size 150 mm dia. |
| 16 | Refixing MS/DI/CI pipe obtained from item No. 11 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 300 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge. |
| 17 | Refixing MS/DI/CI pipe obtained from item No. 12 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 250 mm bore complete inlcuding main / branch connections all as specified and directed. |
| 18 | Refixing MS/DI/CI pipe obtained from item No. 13 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge. |
| 19 | Refixing MS/DI/CI pipe obtained from item No. 14 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engineer-in-Charge. Note:-if Flanges required at site will be paid seperately |
| 21 | Description all as per ser item No 19.00 here-in-before, but of size 250 mm dia. |
| 22 | Description all as per ser item No 19.00 here-in-before, but of size 200 mm dia. |
| 23 | Description all as per ser item No 19.00 here-in-before, but of size 150 mm dia. |
| 24 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engineer-in-Charge. |
| 26 | Description all as per ser item No 24.00 here-in-before, but of size 80 mm dia. |
| 27 | Description all as per ser item No 24.00 here-in-before, but of size 50 mm dia. |
| 28 | Description all as per ser item No 24.00 here-in-before, but of size 40 mm dia. |
| 29 | Description all as per ser item No 24.00 here-in-before, but of size 25 mm dia. |
| 30 | Description all as per ser item No 24.00 here-in-before, but of size 20 mm dia. |
| 31 | Supply and fix in replacement cast iron sluice valve suitable of size 300 mm (PN 1.6) as per IS : 14846 with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing Make:- Kirloskar,Zoloto,Leader or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 32 | Description all as per Ser item No 30.00 here-in-before, but of size 250mm dia. |
| 33 | Description all as per Ser item No 30.00 here-in-before, but of size 200mm dia. |
| 34 | Description all as per Ser item No 30.00 here-in-before, but of size 150mm dia. |
| 35 | Description all as per Ser item No 30.00 here-in-before, but of size 100mm dia. |
| 36 | Description all as per Ser item No 30.00 here-in-before, but of size 80 mm dia. |
| 37 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 38 | Stem bush bronze or as per existing |
| 39 | Gland flange cast iron |
| 40 | Stud/Bolt carbon steel |
| 41 | Stem nut/chaknut |
| 42 | Stem Stain less steel |
| 43 | Replacement of Hand wheel |
| 44 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 45 | Stem bush bronze or as per existing |
| 46 | Gland flange cast iron |
| 47 | Stud/Bolt carbon steel |
| 48 | Stem nut/chaknut |
| 49 | Stem Stain less steel |
| 50 | Replacement of Hand wheel |
| 51 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 52 | Stem bush bronze or as per existing |
| 53 | Gland flange cast iron |
| 54 | Stud/Bolt carbon steel |
| 55 | Stem nut/chaknut |
| 56 | Stem Stain less steel |
| 57 | Replacement of Hand wheel |
| 58 | Supply and fixing in replacement of butterfly valve of size 300 mm (PN 1.6) (ISI Marked) IS 13095 body cast iron type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc with hand lever operated and above with gear operated including taking down old unsv complete all as specified and directed by Engineer-in-Charge. |
| 59 | Description all as per Ser item No 39.00, here-in-before, but of size 250mm bore |
| 60 | Description all as per Ser item No 39.00, here-in-before, but of size 200mm bore |
| 61 | Supply and fixing of 300mm dia flat seat mushroom type valve with extended spindle made out of 32mm MS rod operatable from working plateform including guide bracket as per site requirment and CI hand wheel including dismantling of old unserviceable flat seat mushroom valve including neceesary fixing arrangement etc. at Tawi filtration plant, Make: Leader Kirloskar/Zoloto or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and fixing of 350mm dia flat seat mushroom type valve with extended spindle made out of 32mm MS rod operatable from working plateform including guide bracket as per site requirment and CI hand wheel including dismantling of old unserviceable flat seat mushroom valve including neceesary fixing arrangement etc. at Tawi filtration plant, Make: Leader Kirloskar/Zoloto or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia as per IS 14845 including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down the old existing Make: Leader Kirloskar/Zoloto or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 64 | Description all as per Ser item No 44.00, here-in-before, but of size 80 mm dia |
| 65 | Supply and fix in replacement of cast iron non return valve suitable for 300 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 as per IS:5312 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing.. Make: Zoloto/ Kirloskar/Leader or Equivalent complete all as specified and directed by Engineer-in-Charge. |
| 66 | Description all as per Ser item No 46.00, here-in-before, but of size 250 mm dia |
| 67 | Description all as per Ser item No 46.00, here-in-before, but of size 200 mm dia |
| 68 | Description all as per Ser item No 46.00, here-in-before, but of size 150 mm dia |
| 69 | Supply fabrication and fixing Mild steel (MS) pipes fittings/joints such as flanged joints, bends Tee, tapers , collars , elbow, tail piece (any type) capsand plugs of 100mm to 300 bore. Including taking down existing/ oild fittings, Complete in all respects including cutting,aligning and fixing, complete all as specified and directed by Engineer-in-Charge.Note:- The Quoted Rates shall be deemed to include Material and Labour( M&L) charges for all required welding and associates works. |
| 70 | Supply and fix Nut bolt M-16 (50mm length) & M-20 (75mm length) with 02 (each 5mm thick) Nos washer at each set, complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and fixing leather gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and fixing leather gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engineer-in-Charge. |
| 73 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore passing through NHAI, BRO , by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engineer-in-Charge.Note:- (i) Contractor fully responsible for for jointing work required T&P equipment, and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra fittings/pipe will be measured and paid separatel (iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 74 | Description all as per ser item No 54.00 here-in-before, but of dia 250/200 mm bore pipe |
| 75 | Description all as per ser item No 54.00 here-in-before, but of dia 150/100 mm bore pipe. |
| 76 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line passing through NHAI, BRO by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engineer-in-Charge. Note:- (i) Contractor fully responsible for jointing work required T&P equipment, and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.(ii) Required extra pipe will be measured and paid separately.. (iii) Necessary permission from civil authorities may be obtained where road cutting involves. |
| 77 | Description all as per ser item No 57.00 here-in-before, but of dia 250 to 300 mm bore pipe |
| 78 | S&F of Gun-metal, globe or gate valves, 80 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engineer-in-Charge. |
| 79 | Description all as per ser item No 59.00 here-in-before, but upto 50 mm bore. |
| 80 | Description all as per ser item No 59.00 here-in-before, above but upto 40 mm bore. |
| 81 | Description all as per ser item No 59.00 here-in-before, but upto 25 mm bore. |
| 82 | Description all as per ser item No 59.00 here-in-before, above but upto 20 mm bore. |
| 83 | Supply and fixing GI fittings medium grade ISI marked including complete all as required at site complete all as specified & directed by Engineer-in-Charge. |
| 84 | Elbow 20mm |
| 85 | Elbow 50mm |
| 86 | Socket 15mm |
| 87 | Socket 20mm |
| 88 | Socket 50mm |
| 89 | Socket 80mm |
| 90 | Union 15mm |
| 91 | Union 20mm |
| 92 | Union 50mm |
| 93 | Decoupling, disconnecting sluice valve of size 450 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 94 | Stem bush bronze or as per existing |
| 95 | Gland flange cast iron |
| 96 | Stud/Bolt carbon steel |
| 97 | Stem nut/chaknut |
| 98 | Stem Stain less steel |
| 99 | Replacement of Hand wheel |
| 100 | Material and labour for shifting heavy items /using excavator / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley ect as required at site complete all as specified and directed by Engineer-in-Charge. |
| 101 | Providing and carrying out welding of any type (electric arc / gas welding) for fabrication, erection or repair of steel/MS/GI members, brackets, frames, supports, angles, flats, pipes etc. of any size and thickness, including surface preparation, alignment, welding consumables, finishing and all incidental works, complete, measured per stick/ filler rod / welding rod, complete all as specified and directed by the Engineer-in-Charge. |
| 102 | Supplying and fixing RCC water pipeline route marker of milestone type, made out of reinforced cement concrete of approved quality, of standard market-available size upto 1000 mm height × 300 mm width × 100 mm thickness, with rounded top, painted with approved colour code for water pipeline, and provided with stencil-painted inscription indicating “WATER PIPELINE”, diameter of pipeline and other details as approved by the Engineer-in-Charge, including excavation, PCC bedding if required, embedding the marker minimum 300 mm below ground level, fixing vertically and firmly in position, finishing, painting, lettering and erection of old, complete all as specified and directed by the Engineer-in-Charge. |
| 103 | Material and labour for cutting of existing road / hard standing/ floors/ walls for crossing of MS / DI / CI / GI pipelines for laying of pipes of any size, including necessary excavation and earthwork, and making good and repairing the cut portion with premix bituminous carpet as per the existing surface, with width of trench not exceeding 0.75 m and depth not exceeding 1.5 m, complete all as specified and directed by Engineer-in-Charge. |
| 104 | Material and labour for taking down by scraping and preparation the surface of the header 300mm/400 mm dia approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified and directed by Engineer-in-Charge. |
| 105 | Material & labour for prepration of old MS pipe painted surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engineer-in-Charge. |
| 106 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen,aggregates and high grade polymer to ensure immediate bonding with the existing surface available in bags of 25 KG, complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply, install, testing and commissioning Electromagnetic flow meter size 300 mm dia, integral display /Rubber lining with following specifecations: Flow rate-90.46 to 5427.84 cum/hr, Transmitter -die cast aluminium IP66, power supply-230V ,Outputs -RS4585/4-20mA/MODBUS, Senser Terminal housing-C.S Fabrivated IP 66,Display-Graphic Display, Flange-ASA#150 C.S., Electrode-SS16L,Grouting Electrode-SS316L,Flow tube -SS304, Coil Housing-C.S., and 1 Year warranty with Callibration Certificate inclding cutting/welding of MS pipe 300 mm dia and eletrical connection complete all as specified and directed by Engineer-in-Charge.Make-Everest |
| 109 | M&L for construction of brick/ stone masonary valve pit chamber including dismantling existing of size 1.2 mtr x 1.2 mtr x 1.2 mtr (internal dimension) with 3.15 mm thick MS cover including 50 x 50 x 6 mm angle iron frame with 100 mm hinges embedded in coping with locking arrangement and painting the MS surfaces with two coat of redoxide primer and syntheatic enamel paint. The chamber shall be of PCC 1:4:8 type D2 40 mm graded aggregate for foundation, brick work in cement mortar, 75 mm PCC coping with PCC 1:3:6 type C1, 15 mm thick plastering in cement mortar 1:4 including necessary excavation, earth work and colour washing internally and externally surfaces, complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
