Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Certain B/R repairs including periodicals at RAC, E/M installations and Repair/Maint of internal wiring, light fixtures, switch socket combinations etc at RAC, E/M installations and other areas under GE (Utilities) Udhampur Contract No: GE/U-51/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engineer-in-charge. |
| 3 | Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer-in-charge. |
| 4 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engineer-in-charge. |
| 5 | Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 6 | Description all as per item No 4.00 here-in-before but except bricks, complete all as specified and directed by Engineer-in-charge.Note : Old bricks obtained against demolition shall be used. |
| 7 | Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 8 | Description all as per item No 6.00 here-in-before but except stones, complete all as specified and directed by Engineer-in-charge.Note : Old stones obtained against demolition shall be used. |
| 9 | Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 10 | Preparing and Cleaning the dust and foreign materail etc complete for roof surfaces (plaster/concrete) and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, incl.applying two coats of aluminium paint over roof treatement complete all as specified and directed by Engineer-in-charge. |
| 11 | Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engineer-in-charge. |
| 12 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and directed by Engineer-in-charge. |
| 13 | Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work complete all as specified and directed by Engineer-in-charge. |
| 14 | Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work complete all as specified and directed by Engineer-in-charge. |
| 15 | Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre complete all as specified and directed by Engineer-in-charge. |
| 16 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-charge. |
| 17 | M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge. |
| 19 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 20 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each, and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 21 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking down steel windows including frames and shutters not exceeding 1.50 sqm each and removing to store complete all as specified and directed by Engineer-in-charge. |
| 23 | Taking down steel windows including frames and shutters exceeding 1.50 sqm but not exceeding 4 sqm each and removing to store complete all as specified and directed by Engineer-in-charge. |
| 24 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engineer-in-charge. |
| 25 | S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engineer-in-charge. |
| 26 | S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 .ii) MS fillets, glazing wire gauge shall be measured and paid seprately. |
| 27 | Description all as per item ser No 25.00 here-in-before but without glazing bar complete all as specified and directed by Engineer-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 sheet 1/3 to 3/3.ii) MS fillets, glazing, wire gauge shall be measured and paid seprately. |
| 28 | Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed by Engineer-in-charge in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004). |
| 29 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed by Engineer-in-charge. Make: Rajshri or equivalent as approved. |
| 30 | Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engineer-in-charge. |
| 31 | S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge. |
| 35 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer-in-charge. |
| 36 | Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engineer-in-charge. |
| 37 | Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engineer-in-charge. |
| 38 | M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs complete all as specified and directed by Engineer-in-charge. |
| 40 | Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 41 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-charge. |
| 42 | Description all as per Ser item No 40.00 here-in-before, above but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engineer-in-charge. |
| 43 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engineer-in-charge. |
| 44 | M & L for kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engineer-in-charge. |
| 45 | Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engineer-in-charge. |
| 46 | M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-charge. |
| 47 | M & L for 50mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed by Engineer-in-charge. |
| 48 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of path/hardstanding, complete all as specified and directed by Engineer-in-charge. |
| 49 | Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engineer-in-charge. |
| 50 | Chequered cement concrete coloured tiles 25cmx25cmx25mm thick glossy finish set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-charge. |
| 51 | Machine pressed precast concrete interlocking paver block 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 80mm thickness, M-40 over and including 75mm thick PCC, type D-2, M-7.5(1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engineer-in-charge. |
| 52 | Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, ccomplete all as specified and directed by Engineer-in-charge. |
| 53 | Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls complete all as specified and directed by Engineer-in-charge.Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 54 | Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls complete all as specified and directed by Engineer-in-charge.Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 55 | M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge. |
| 56 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge. |
| 57 | M & L two coat of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after complete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc. complete all as specified and directed by Engineer-in-charge. |
| 58 | Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engineer-in-charge. |
| 59 | Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engineer-in-charge. |
| 60 | Preparation of old plastered/unplastered surfaces as in ceilings and applying one coat of white wash, complete all as specified and directed by Engineer-in-charge. |
| 61 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed by Engineer-in-charge. |
| 62 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed by Engineer-in-charge. |
| 63 | Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 64 | S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 65 | Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engineer-in-charge. |
| 66 | Supply and fixing in repair angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engineer-in-charge. |
| 68 | S&F as in repair bib tap 15mm bore fancy type chromium plated complete all as specified and directed by Engineer-in-charge. |
| 69 | S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engineer-in-charge. |
| 70 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-charge. |
| 71 | Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.(Note : Reinforcement shall be measured and paid separately) |
| 72 | TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer-in-charge. |
| 73 | TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer-in-charge. |
| 74 | Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engineer-in-charge. |
| 75 | 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge. |
| 76 | 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed by Engineer-in-charge. |
| 77 | PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engineer-in-charge. |
| 78 | S&F in repir stainless steel grating doom 100mm dia with or without hole complete all as specified and directed by Engineer-in-charge. |
| 79 | S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and directed by Engineer-in-charge. |
| 80 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, laid in trenches or in floor inluding taking down existing old pipes complete all as specified and directed by Engineer-in-charge. |
| 81 | Description all as per Ser Item No 79.00 here-in-before, but bore of pipe 75mm. |
| 82 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes complete all as specified and directed by Engineer-in-charge. |
| 83 | S & F 75mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes complete all as specified and directed by Engineer-in-charge. |
| 84 | S&F for 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 85 | S&F for 75mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 86 | S&F for 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge. |
| 87 | S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 88 | S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms)., complete all as specified and directed by Engineer-in-charge. |
| 89 | S & F in repair for Vitreous china wash down water closet pan pedestal pattern, white including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe and plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including jet pressure complete all as specified and directed by Engineer-in-charge. |
| 90 | Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-charge. |
| 91 | S&F Steel rolling shutter (curtain made of 1mm thick mild steel sheet) area exc. 5sqm each with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type ,thickness of laths 1mm ,incl taking down carefully existing old rolling shutter complete all as specified and directed by Engineer-in-charge. |
| 92 | Taking down the existing aluminium door/window frame with shutters exc.1.5 sqm each incl all accessories and making good the disturbed portion complete all as specified and directed by Engineer-in-charge. |
| 93 | M&L for Powder coated (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm , thickness of sheet 16 gauge , including sliding shutter with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 4 mm thick Tinted glass and necessary Aluminium moongreies and handles, locks complete all as specified and directed by Engineer-in-charge. |
| 94 | M&L for Powder coated (of approved color) aluminium door frame of any shade with shutter of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5 mm thick tinted glass and 12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure to each shutter complete all as specified and directed by Engineer-in-charge. |
| 95 | S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed by Engineer-in-charge. |
| 96 | S&F repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge. |
| 97 | Powder coated Aluminium grills of type DG 117 of make Deco-Grill, fixed to window opening as in repairs complete all as specified and directed by Engineer-in-charge. |
| 98 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge. |
| 99 | Powder coated Aluminium snap grid frame work 605 x 605 mm for false ceiling including all hanging arrangements with hangers 6mm dia GI ( upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified in clause 10.38.1 of MES Schedule Part-I complete all as specified and directed by Engineer-in-charge. |
| 100 | Asbestos cement plain decorative type building boards, 4mm thick of size 60cmx60cm fixed to snap grid frame work as in ceilings, complete all as specified and directed by Engineer-in-charge. |
| 101 | Solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing & including on PVC frame as per specified in MES schedule part-II complete all as specified and directed by Engineer-in-charge. |
| 102 | E/M Portion :-Taking down carefully alu./copper point wiring ,light fan socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and marking good to disturbed surfaces of walls floors etc and complete all as specified and directed by Engineer-in-charge. |
| 103 | M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit with sunken box, modular metal flux GI Box, hylam sheet for fixing of switches, sockets,light, fan regulators etc for the following complete all as specified and directed by Engineer-in-charge. |
| 104 | One light/fan/bell point or one fan point controlled by one switch |
| 105 | One 3/5 pin socket outlet, 5 Amp independent |
| 106 | One socket outlet 5 Pin, 5 Amps, SP on same board. |
| 107 | One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size . |
| 108 | One light point point controlled by two 2-way switches with cables 1.5 sqmm size. |
| 109 | M & L for wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables in PVC casing caping of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm for fixing of switches, sockets,light, fan regulators etc for the following complete all as specified and directed by Engineer-in-charge. |
| 110 | One light/fan/ /bell point or one fan point controlled by one switch |
| 111 | One 3/5 pin socket outlet, 5 Amp independent |
| 112 | One socket outlet 5 Pin, 5 Amps, SP on same board. |
| 113 | One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size . |
| 114 | S&F Piano type switch one way 6 Amps , 240 Volt, ISI marked complete all as specified and directed by Engineer-in-charge. |
| 115 | S&F Bell push,flush type, one way 6 Amps , 240 Volt ,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 116 | S&F Switch Piano type single pole 15Amps one way 240 Volt, ISI marked, complete all as specified and directed by Engineer-in-charge. |
| 117 | S&F Switch 6 amp, 2 way, 240 Volt ,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 118 | S&F socket outlet 2 in 1,3/5 pin piano type 5 Amp flush type ISI marked complete all as specified and directed by Engineer-in-charge. |
| 119 | S&F socket out let 6 /16 Amps 6 pin flush type complete all as specified and directed by Engineer-in-charge. |
| 120 | M & L for modular white cover plate with frame 8 module complete all as specified and directed by Engineer-in-charge. |
| 121 | M & L for modular white cover plate with frame 6 module complete all as specified and directed by Engineer-in-charge. |
| 122 | M & L for modular white cover plate with frame 4 module complete all as specified and directed by Engineer-in-charge. |
| 123 | M & L for modular white cover plate with frame 3 module complete all as specified and directed by Engineer-in-charge. |
| 124 | M & L for modular white cover plate with frame 2 module complete all as specified and directed by Engineer-in-charge. |
| 125 | M & L for modular white cover plate with frame 1 module complete all as specified and directed by Engineer-in-charge. |
| 126 | S&F Modular switch one way 6 A,1 module 240 Volt, ISI marked complete all as specified and directed by Engineer-in-charge. |
| 127 | S&F Modular Bell push,one way 6 A, 1 module, 240 Volt ,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 128 | S&F modular Switch single pole 16A one way, 1 module 240 Volt, ISI marked, complete all as specified and directed by Engineer-in-charge. |
| 129 | S&F modular Switch 10 amp, 2 way, 1 module, 240 Volt ,ISI marked complete all as specified and directed by Engineer-in-charge. |
| 130 | S&F modular socket 3 pin 6Amp 2 module ISI marked complete all as specified and directed by Engineer-in-charge. |
| 131 | S&F modular Power unit with 20 Amps MCB and 16 Amps piug top 3 module complete all as specified and directed by Engineer-in-charge. |
| 132 | S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed by Engineer-in-charge. |
| 133 | S&F Lamp holde PVC type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-charge. |
| 134 | S&F of electronic step type regulator of capacity 240 volts flush type ISI marked complete all as specified and directed by Engineer-in-charge. |
| 135 | S& F Bell, AC, 230 volts, single pole complete all as specified and directed by Engineer-in-charge. |
| 136 | S&F modular socket out let 6 /16 Amps 3 pin, 2 module complete all as specified and directed by Engineer-in-charge. |
| 137 | S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engineer-in-charge. |
| 138 | S&F in replacement LED lights fitting 1x 40W,warm white 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engineer-in-charge. |
| 139 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-charge. |
| 140 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. |
| 141 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as specified and directed by Engineer-in-charge. |
| 142 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-charge. |
| 143 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-charge. |
| 144 | M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1), complete all as specified and directed by Engineer-in-charge. |
| 145 | S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces complete all as specified and directed by Engineer-in-charge. |
| 146 | S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces complete all as specified and directed by Engineer-in-charge. |
| 147 | S&F TPN Distribution board vertically with provision for TPN DB including MCCB 100 Amp, 16 kA,as incomer in 4 way TPN DB double door IP-43 protection including all PCC & cementing work for installation of TPN DB to wall and making good of wall. surfaces complete all as specified and directed by Engineer-in-charge. |
| 148 | S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 Ka, 40 to Amps, 30mA complete all as specified and directed by Engineer-in-charge. |
| 149 | S&F MCB single pole 240 Volts , 6 to 20 Amps all as specified and as directed. Make : Havells/Legrand/Philips |
| 150 | Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as specified and directed by Engineer-in-charge. |
| 151 | Description all as per Serial item No 140.00 here-in-before, but for exhaust of any size/make, complete all as specified and directed by Engineer-in-charge. |
| 152 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavyduty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core in service connections complete all as specified and directed by Engineer-in-charge. |
| 153 | Description all as per Serial item No 142.00 here- in- before, but for 10 sqmm 2 core |
| 154 | Description all as per Serial item No 142.00 here- in- before, but for 16 sqmm 2 core |
| 155 | S& F in repair MCCBs 415 Volt 16 KA, 4 pole 63 Amp complete all as specified and directed by Engineer-in-charge. |
| 156 | S& F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed by Engineer-in-charge. |
| 157 | S& F in repair PVC Rectangular block for switches,socket, fan regulator, 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep complete all as specified and directed by Engineer-in-charge. |
| 158 | Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning complete all as specified and directed by Engineer-in-charge.(Note|-Parts/components will be measured and paid seperately under their respective items) |
| 159 | Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engineer-in-charge. |
| 160 | Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and directed by Engineer-in-charge. |
| 161 | Top / botton canopy of required size with tightening screws, complete all as specified and directed by Engineer-in-charge. |
| 162 | Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, complete all as specified and directed by Engineer-in-charge.Make :- NBC, SKF, |
| 163 | Ball bearing suitable for exhaust fan 300mm to 600 mm sweep of different make, complete all as specified and directed by Engineer-in-charge. |
| 164 | Split pins of galvanished iron 1/8\\" dia, 2\\" length complete all as specified and directed by Engineer-in-charge. |
| 165 | Rewinding of exhaust fan 300mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, complete all as specified and directed by Engineer-in-charge. |
| 166 | Description all as per Serial item No 155.00 here in before, but for 450 mm to 600 mm sweep |
| 167 | Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and directed by Engineer-in-charge. |
| 168 | Description all as per Serial item No 157.00 here in before, but for 3.15 MFD. |
| 169 | Description all as per Serial item No 157.00 here in before, but 4 MFD for Exhaust Fan |
| 170 | Description all as per Serial item No 157.00 here in before, but 6 MFD for Exhaust Fan |
| 171 | Repair and maint of Acrylic sheet molded letters ( GARRISON ENGINEER (UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire complete all as specified and directed by Engineer-in-charge.Make of LED strip should be of Philips/Bajaj /Wipro |
| 172 | Supply and fixing ceiling fans complete with blades, down rods,elecctonic regulators and accessories, 230 V, 1200 mm sweepvalue 6.00mm BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-charge.Note - Old fans deposited in MES Stores. |
| 173 | Taking out geyser carefully from its location of any make & capacity 25/35/50Ltrs and dismantling the same for replacement of parts described under items here-in-below and installed with complete repair and re-assembling and installation of complete set to work complete all as specified and directed by Engineer-in-charge.Note :- Labour for taking down and re-fixing all type of spare parts included in this items & all type of Defective parts/glass wool will be measured and paid saperatly under respective items of BOQ as supply only. |
| 174 | Supply of PVC connection with two Nos of adopter and washer of size 300 mm long suitable for geyser and including all fixing accessories complete all as specified and directed by Engineer-in-charge. |
| 175 | Supply of Head assy/Apparatus plate heavy duty 18 SWG with rubber gasket of suitable size for 25/35/50 Ltr cap 9/6 holes geyser of any make complete all as specified and directed by Engineer-in-charge. |
| 176 | Supply of Heating element complete set for Havells geyser of 2.0 KW, 220/230 volts (ISI marked) complete all as specified and directed by Engineer-in-charge. |
| 177 | Supply of thermostat ranging 60 degree to 90 degree adjustable type, long, Operative on 250 Volts complete all as specified and directed by Engineer-in-charge. |
| 178 | Supply of stainless steel inner tank Capacity 25 Ltrs heavy duty (Approx height 304 mm) with SS 304 Grade complete all as specified and directed by Engineer-in-charge. |
| 179 | Supply and Fixing in replacement of electric water heater,storage with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 3 Star rated complete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc, complete all as specified and directed by Engineer-in-charge. Note: Unserviceable Items deposited in MES Store in BER Procedure. |
| 180 | S&F wireless,waterproof door bell for office at over 120 meter range operating complete all as specified and directed by Engineer-in-charge. Make-Anchor |
| 181 | S&F LED Lamp 9 Watt suitable for lamp holder complete all as specified and directed by Engineer-in-charge. |
| 182 | Supply and fixing building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W after dismantling taking down unsv one complete all as specified and directed by Engineer-in-charge.Make: Product description LSTS-25-CDL-M in Crompton or its equivalent in the makes mentioned in Appendix 'A'. (Note for item No 05 to 07) : (a) Make of fitting and driver shall be same. (b) Power factor shall be 0.95 and above. |
| 183 | Supply and fixing building security light bracket made out of galvanised steel light grade pipe of 25/40mm dia as per dia of light 1.5 mtr long bend to an angle of 120 degree with 02 Nos clamp made out of 50mm x 5mm flat iron and 06 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 184 | S&F Strip LED light water proof operating on 230 volt yellow light in colour complete all as specified and directed by Engineer-in-charge.Make of LED strip should be of philips/Bajaj/Wipro |
| 185 | S&F in repair decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed by Engineer-in-charge.Make-Havells, Orderning Code No-LHFOAJE1TN1I060 |
| 186 | S&F in repair slim surface mounted 12 watt LED panel with premium diffuser to ensure glare free & even light distribution complete all as specified and directed by Engineer-in-charge.Make-Havells, Orderning Code No-LHEAAHP7IL1W012 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
