|
| 1 | Supply, installation, Testing & Commissioning in renewal RGBW 24Watt flood light with dimensions Φ100x133x111mm for surface-mounted outdoor facade lighting. Luminaire features UV/temperature-resistant lens system with symmetric distribution. Luminous flux: 500-580lm (measured in white with all 4 channels active). Integrated decoder with IP68 connector, controlled via DMX/Ethernet controller (16.7M colour capability). Rated input: DC 24V constant voltage via external driver (luminaire supplied without control unit). Aluminium die-cast housing (Shiny Grey powder coat >60μm) with 3mm toughened glass cover, IP66 ingress protection and IK08 impact rating. Separate control gear operates on direct voltage supply (Driver efficiency >85%, THD <10%). Operating environment: -20°C to +50°C, 10%-90% humidity. Selectable beam angles 12° to 60° (final per approved design). Adjustable mounting bracket for directional aiming. CE/BIS certified luminaire and driver. LM-79 & LM-80 test reports from NABL-accredited laboratory required prior to material supply. Complete system includes all accessories, connectors, and wiring. Rated service life (L70B50 @25°C): >50,000 hours. Make: PANASONIC/ Philips/Martin /Lustre/WE-EF. |
| 2 | Note :-1. Bidder shall take authorisation from OEM.2. DMH programming work and installation support will be given by OEM and a written certificate in this regard shall be submitted by Bidder.3. Bidder are advised to take proper rates from the manufacturer before quoting the rate. |
| 3 | Supply, installation, Testing & Commissioning in renewal of RGBW 58Watt flood light with dimensions Φ155x203x149mm for surface-mounted outdoor facade lighting. Luminaire features UV/temperature-resistant lens system with symmetric distribution. Luminous flux: 2000-2200lm (measured in white with all 4 channels active). Integrated decoder with IP68 connector, controlled via DMX/Ethernet controller (16.7M colour capability). Rated input: DC 24V constant voltage via external driver (luminaire supplied without control unit). Aluminium die-cast housing (Shiny Grey powder coat >60μm) with 3mm toughened glass cover, IP66 ingress protection and IK08 impact rating. Separate control gear operates on direct voltage supply (Driver efficiency >95%, THD <10%). Operating environment: -20°C to +50°C, 10%-90% humidity. Selectable beam angles 8° to 60° (final per approved design). Adjustable mounting bracket for directional aiming. CE/BIS certified luminaire and driver. LM-79 & LM-80 test reports from NABL-accredited laboratory required prior to material supply. Complete system includes all accessories, connectors, and wiring. Rated service life (L70B50 @25°C): >50,000 hours. Make: PANASONIC/ Philips/Martin /Lustre/WE-EF. |
| 4 | Note :-1. Bidder shall take authorisation from OEM.2. DMH programming work and installation support will be given by OEM and a written certificate in this regard shall be submitted by Bidder.3. Bidder are advised to take proper rates from the manufacturer before quoting the rate. |
| 5 | Supply, installation, Testing & Commissioning in renewal of RGBW IP67-rated flexible LED neon strip for surface-mounted outdoor applications. 24V DC operation with UV-resistant silicon construction and opal diffused optics delivering spotless uniform illumination. Standard 5-meter lengths, field-cuttable at 100mm intervals (per design requirements) with solderless/silicone end caps to maintain IP67 rating. Dimensions: 16mm (±5%) width × 16mm (±5%) height. LED density: 120 LEDs/meter ensuring consistent output. Luminous flux: ≥800 lm/m (measured in white, all RGBW channels active). Vertical bending capability (min. radius 300mm ±5%) in the same axis as illuminating surface. Requires non-integral 24V DC constant voltage outdoor-rated driver (THD<10%, efficiency >85%). DMX512 control protocol with 16.7 million colours and smooth gradients. Operating environment: -25°C to +50°C, 10%-90% humidity. Includes IP67 quick-connect connectors for seamless runs. Mounting via aluminium channels (supplied separately) with stainless-steel clips. Performance: 50,000 hours (L70B10), CRI>80, colour consistency ≤3 SDCM. Mandatory certifications: BIS, CE, RoHS, and NABL-accredited lab reports (LM79, Type Test, Safety: IEC 60598, IS 10322-5, IS 161-03/05/06/07; Surge: IEC 61000-4-5; EMC: EN 55015) with ULR numbers. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 6 | Note :-1. Bidder shall take authorisation from OEM.2. DMH programming work and installation support will be given by OEM and a written certificate in this regard shall be submitted by Bidder.3. Bidder are advised to take proper rates from the manufacturer before quoting the rate. |
| 7 | Supply, installation, Testing & Commissioning in renewal of Controller capable of delivering light shows to installations with up to 2048 unique light addresses. Software light show authoring software along with controller should add new levels of sophistication and flexibility to lighting installations while eliminating the need for expensive lighting boards and technical programming expertise. It should be compatible for programming with PC. There should be provision of MicroSD card. OS requirement for the controller is Windows 7/8/10 or latest version. Easy to use with factory preset shows, custom show-authoring capabilities, an intuitive LCD interface, removable SD card storage, and on board light addressing features, controller should enable to spend more time on the creative aspects of lighting design and less time on setup.Packaged with software should light show authoring software—software should give the flexibility to create and manage light shows using fully customizable effects.The controller should have variety of features including 512 DMX channels on each port, Ethernet facility. Meke: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 8 | Note :-1. Bidder shall take authorisation from OEM.2. DMH programming work and installation support will be given by OEM and a written certificate in this regard shall be submitted by Bidder.3. Bidder are advised to take proper rates from the manufacturer before quoting the rate. |
| 9 | Supply, installation, Testing & Commissioning in renewal of DMX Slave/ Booster should have a suitable output 8 port DMX splitter with DMX pass-through supporting bi-directional communications for discovery, addressing and DMX control of Architectural lighting products.The unit should take the ethernet signal and split the signal into suitable separate output port to channels allowing for expanding the number of devices controlled from as per design / site requirement.The output terminals should electronically & optically isolated from the input. All output ports should have an independent output driver to boost the DMX/RDM signal. Controller should be capable to amplify the DMX signal & allowing the data link to be extended by max 70 m (230 ft). AC adaptor included and it should be compatible with façade lighting products. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 10 | Supply, installation, Testing & Commissioning of DMX Data Boosters• compatible with the international standard DMX512 protocol (1990)• The signal after photoelectric isolation (using SHARP high-speed optocoupler and isolated power supply)• The original Tl 4851C, lightning and static electricity protection; • The built-in MCU waveform correction, completely solve the problem of signal• good anti-interference, fault self recovery function.• The control system to achieve more rich and colorful effect. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 11 | Supply, installation, Testing & Commissioning of DMX Addressing Kit for fast and convenient address writing and testing for DMX512 luminaires. The device supports internal test animation for DMX512 addresses verification and is designed to be suitable for a variety of applications. The device can automatically write address to a whole group of interconnecting luminaires within minutes. Miniature industrial design, compact size and touch screen. It can be powered by a power bank with a Micro-B type USB port for on-site programming and testing after installation. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 12 | Supply, installation, testing and commissioning of Alluminium Profile for neon flex fixing. |
| 13 | S&F of DMX Jummper Cable 1meter Length 4 Pin IP68. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 14 | S&F of DMX Jummper Cable 1meter Length 5 Pin IP68. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 15 | Supply, installation, Testing & Commissioning of DC power driver for the above Lights, Power : 150W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP65, Surge protection : LL 4KV, LE 6KV. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 16 | Supply, installation, Testing & Commissioning of DC power driver for the above Lights, Power : 100W, Input : AC 110-240V AC, 50Hz, Output : DC 24V, Protection rating, IP65, Surge protection : LL 4KV, LE 6KV. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 17 | Supply, installation, testing and commissioning of IP68 Water Proof I & T Connectors. |
| 18 | M&L for Programming, Testing, Troubleshooting and synchronization of DMX control system.The addressing /programming of fixtures with the multiple scenes (at least 15 Themes) as per instruction of Engineer in charge. Themes may be modified according to the requirement of user during course of time. |
| 19 | M&L for Wiring of Mainline by 1 no. Single core HRFR / FRLS grade PVC insulated, copper conductor cable of size 10 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). |
| 20 | Supply and fixing of TPN MCB DB ( Heavy duty, Outdoor type, UV ray protected, self fireextinguishing and resistant to abnormal heat and fire up to 650 degree C GWT, shock resistance IK09 and IP65 degree of protection grade transparent DB box, similar to ABB Mistral65 - 20 Modules or equivalent ), 3Ph, 50Hz, 415V, 4 way per phase, 415V, 50Hz, complete with total 12 nos. SP MCB of current rating from 6A to 32A, 10 kA, 240 Volt, 50Hz per phase as per requirement of load and one no. FP RCBO 63A, 300mA, 10 kA 415V, 50Hz, Suitable for AC + Pulsating DC (Type A) + Harmonics. |
| 21 | S&F of Belden 9841 DMX cable, 2 pair, 24 AWG tinned copper conductors, PE insulation, Beldfoil® and tinned copper braid shield, PVC jacket, 305-meter roll, blue/white and white/blue color code, 110 ohms impedance, UL and NEC compliant, indoor use, operating temperature -30°C to +80°C.\\" |
| 22 | S&F of Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding , cable socketing and connection with all suitable arrangement |
| 23 | M&L for Wiring of light point by 1 No. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor (ECC). |
| 24 | Supply, Installation, Testing and Commissiong RGBW 24Watt 1000mm length LED Linear Light for facade lighting applications. Surface-mounted outdoor luminaire featuring UV/temperature-resistant lens system with symmetric distribution. Luminous flux: 1100-1300lm (measured in white with all 4 channels active). Integrated decoder with IP68 connector, controlled via DMX/Ethernet controller (16.7M colour capability). Rated input: DC 24V constant voltage (luminaire supplied without control unit). Aluminium extrusion housing with surface anodic oxidation, 3-4mm UV-stabilized toughened glass cover, IP66 ingress protection and IK08 impact rating. Separate control gear unit operates on direct voltage supply (Driver efficiency >95%, THD <10%). Operating environment: -20°C to +50°C, 10%-90% humidity. Selectable beam angles from 12° to 60° (final selection per approved design). Adjustable mounting bracket for directional aiming. CE/BIS certified luminaire and driver. LM-79 & LM-80 test reports from NABL-accredited laboratory required prior to material supply. Complete system includes all accessories, connectors, and wiring. Rated service life (L70B50 @25°C): >50,000 hours. Five-year comprehensive warranty. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 25 | Supply, Installation, Testing and Commissiong RGBW 120Watt flood light with dimensions Φ208x267x184mm for surface-mounted outdoor facade lighting. Luminaire features UV/temperature-resistant lens system with symmetric distribution. Luminous flux: 5200-5300lm (measured in white with all 4 channels active). Integrated decoder with IP68 connector, controlled via DMX/Ethernet controller (16.7M colour capability). Rated input: DC 24V constant voltage via external driver (luminaire supplied without control unit). Aluminium die-cast housing (Shiny Grey powder coat >60μm) with 3mm toughened glass cover, IP66 ingress protection and IK08 impact rating. Separate control gear operates on direct voltage supply (Driver efficiency >95%, THD <10%). Operating environment: -20°C to +50°C, 10%-90% humidity. Selectable beam angles 12° to 60° (final per approved design). Adjustable mounting bracket for directional aiming. CE/BIS certified luminaire and driver. LM-79 & LM-80 test reports from NABL-accredited laboratory required prior to material supply. Complete system includes all accessories, connectors, and wiring. Rated service life (L70B50 @25°C): >50,000 hours. Make: PANASONIC / Philips/Martin /Lustre/WE-EF. |
| 26 | Supply, Installation, Testing and Commissiong of permanently submersible LED neon flex for continuous underwater operation at depths up to 1 meter. Flexible 24V DC system with double-layer extruded silicone tubing (outer layer: UV-resistant + abrasion-proof; inner layer: optical-grade diffusion) providing uniform 360° illumination. Rated IP68 per IEC 60529 (certified 30-day submersion test at 1.5m depth). Dimensions: 16mm X 16mm (±3%) with 120 LEDs/meter density. Luminous flux: ≥900 lm/m in white mode (all RGBW channels active). Pressure-resistant construction withstands hydraulic pressure up to 0.3 MPa. Compatible with DMX512/RDM protocols via IP68 wet-makeable connectors. Operating temperature: -30°C to +50°C with thermal shock resistance. Saltwater/chlorine-resistant formulation passes 168-hour salt spray test (ASTM B117). Includes stainless steel end caps and pressure-equalization valves to prevent water ingress. Certifications: CE/BIS/RoHS/UL 2267 + NABL-accredited reports (LM79, LM80, IP68 validation per IEC 60529, submersion endurance test). Five-year warranty against water ingress and lumen depreciation. (xi) All existing earthing of the lifts shall be maintained and made fully functional by the contractor to the entire satisfaction of the Engr-in-Charge. Please Enable Macros to View BoQ information |
