|
| 1 | Taking down cement plaster,existing wall tile/mosaic in any thickness including racking out joint hacking for key scrubing down with water etc complete all as specified and directed by Engr in charge. |
| 2 | M&L Vitrified Light/dark shade tiles double charge 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.42 sqm but n exc 1.00 sqm in wall/skirting with 10 mm thick cement mortar 1:4 to match the shade, pattern complete all as specified and directed by Engr in charge. |
| 3 | M&L Ceramic matte digital wall external tiles Light/dark shade 9 to 10 mm thick (Square or rectangular ) polished , size of each 300mmx600mm, in wall/skirting with 10 mm thick cement mortar 1:4 to match the shade, pattern complete all as specified and directed by Engr in charge. |
| 4 | M&L for 300x600 x7 mm thick glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site complete all as spd and directed by Engr-in-charge. |
| 5 | M&L for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge. |
| 6 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & fair without using extra cement upto the 4 th storey complete all as spd and directed by Engr-in-charge. Note : WPC shall be measured & paid seperately. |
| 7 | Supply only integral water proofing compound ISI marked complete all as spd and directed by engr-in-charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engr in charge. Notes:-Dismantled material should be thrown out of the defence line at govt approved dumping area. |
| 9 | M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 (including hacking of floors) to match shade, pattern, laying etc of tiles as directed at site complete all as specified and directed by Engr in charge. |
| 10 | M&L Vitrified Light/dark/Highlighter shade tiles 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles n exc 0.36 sqm in floors in repair,set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 (including hakcking of floors) to match shade, pattern, laying etc complete all as specified and directed by Engr in charge. |
| 11 | M&L Vitrified Light/dark/Highlighter shade tiles double charge 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.42 sqm but not exe 1.0 sqm , in floors in repair,set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 (including hakcking of floors) to match shade, pattern, laying etc complete all as specified and directed by Engr in charge. |
| 12 | M& L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado,pillar and floor laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Grinding blushing to achieve granite finish including moulding to exposed edges.complete all as specified and directed by Engr in charge. Note:- the work should be executed in patch work. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engr in charge. Notes:-Dismantled material should be thrown out of the defence line at govt approved dumping area. |
| 14 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and directed by Eng-in charge.Note:- Before execution of above mentioned item it is compulsary to make good the existing surface of PCC so that paver block could be fixed properly and no extra cost will be bourne by department. |
| 15 | M&L for Cemented tiles of size 30cm x 30xm x22mm thick (Designer tile flower type), machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and color pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge Note:- Before execution of above mentioned item it is compulsary to make good the existing surface of PCC so that paver block could be fixed properly and no extra cost will be bourne by department. |
| 16 | Demolition of cement concrete (unreinforced) as in any discription and any position including deposal off rubbish to a distance not exc 100 mtr complete all as specified and directed by Engr in charge. |
| 17 | M&L for cement concrete 1:2:4(Type B-2), 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even,laid to an outward slope of not less than 1:12,plinth protection shall be cast in panels not exceeding 2.00 sqm area with 6mm wide joint between the plinth protection panels,10mm joint between wall and plinth protection and filled with bitumastic filler.complete all as spd and directed by Engr-in-charge |
| 18 | M&L Cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) in foundation filling and mass concrete.complete all as spd and direcetd by engr-in-charge. |
| 19 | M&L for cement concrete 1:2:4 type B1 using 20mm graded aggregate as in coping, benching, bed plates, coping and the like including weathering, slightly rounded or chamfered angles as directed including formwork and finishing all exposed surfaces complete all as specified and directed by Engr-in-Charge. |
| 20 | Dismentling of RCC ,iron post and similar type work or any description not other wise provided complete all as specified and directed by Engr in charge. |
| 21 | M&L for Structural steel work (Ornamental and Special Design) in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in- Charge.Note:- Pattern and design (Ornamental and Special Design) should be approved by GE and no extra cost will be bourne by department. |
| 22 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,including joing cleats and other necessary required items as per site.complete all as spd and directed by engr-in-charge and any type of ornament pattern and design as approved by GE.Note:-1.Contractor shall not have any claim in respect of design/Ornamental shape/designer member,the differnece of rate and amount of desinger pattern will not be paid by Department. |
| 23 | Dismantling of asbestos cement sheets,poly-carbonate sheet,corrugated or semi corrugated etc in roof covering.complete all as specified and directed by Engr in charge. |
| 24 | S& F in repairs Pre-painted galvalume aluminium zinc coated corrugated sheet (including pre-laminated guard film) 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding in any shape (Curved shape or Plan Shape as per direction of GE and no extra payment will be paid to contractor against the same)/size as per user requirement to roof, wall, fixed with self tapping screws.complete all as specified and directed by Engr in charge. |
| 25 | S& F in repair 08 mm thick Poly-Carbonate UV protected hollow sheet with side lap fixed with coach screw and washer etc in roof, wall in any shape (Curved shape or Plan Shape as per direction of GE and no extra payment will be paid to contractor against the same)/size as per site requirement, fixed with self tapping screws.complete all as specified and directed by Engr in charge. |
| 26 | M&L preparation newly plastered surface of wall and Applying two coats of oil bound distemper over one coat of primer followed by 3mm wall care putty to achieve the surface even and smooth properly and upto the desired finish.complete all as specified and as directed by engr-in-charge. |
| 27 | M&L for preparation of newly plastered surface of wall and applying two coats of Premium acrylic smooth exterior paint with silicone additives of required shade with two or more coats applied @ 1.43Ltr/10 sqm over and including priming coat of exteriorapplied @2.20kg/10 sqm with 3mm wall care putty to achieve the surface even and smooth properly and upto the desired finish complete all as specified and as directed by Engr in Charge.(make Burger, nerolac,asian) Group 'A'. |
| 28 | M&L for Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F for viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P' or 'S' incl flush pipe 32mm dia connecting with flushing rim complete all as specified and directed by Engr in charge. |
| 30 | S&F in Repair PVC seat cover for EWC white colour complete with MS Hinged cromium plated all as spd and directed by Engg-in-Charge |
| 31 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed by Engr in charge. |
| 32 | S&F health faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 33 | S&F in repaired Vitreous china wash hand basin, white , flat back, size 550 x 400X150 mm with brackets,wall hung wash basin with half pedstal height 440mm including cutting for and pinning in ends of brackets or erecting stand including bottle trap connected to 32mm pvc pipecomplete all as specified and directed by Engr in charge. |
| 34 | S&F in repair stainless steel sink without draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge. |
| 35 | S&F in repair stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mm x330mm x 160mm complete all as specified and directed by Engineer-in- charge. |
| 36 | S&F in repair fancy type Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unionS&Fixed.complete all as specified and directed by Engr in charge. |
| 37 | S&F in repair 15mm dia Bib taps cast copper alloy Cromium plated(CP)with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed by Engr in charge. |
| 38 | S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge |
| 39 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 300 gms)complete all as specified and directed by Engr in charge. |
| 40 | S&F in repair 20mm PVC Float valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.complete all as specified and directed by Engr in charge. |
| 41 | Description all as per item no 40 above but 15mm diacomplete all as specified and directed by Engr in charge. |
| 42 | S&F in repair pillar tap cast copper alloy CP screwed down high pressure with or without lettered hot and cold with long screwed shankS&Fly nut screwed for Iron pipe and fixed 15mm diacomplete all as specified and directed by Engr in charge. |
| 43 | S&F in repair Shower Rose Cromium plated of size 125mm with arm suitable for 15mm dia pipe (as per sample approved by Engineer-in-Charge. |
| 44 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles.complete all as spd and directed.Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 45 | M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4complete all as specified and directed by Engr in charge. |
| 46 | Dismentling of RCC roofs ,shelves, facia beams ,chajjs and similar suspended work etc complete. Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 47 | M&L RCC 1:2:4 type B-1 (12.50 mm graded stone agg) as in shelves, facia beams ,chajjs and similar suspended work including necessary form work , scaffoholding upto 4th storey ht. of bldg etc complete. |
| 48 | M&L for TMT bars 10 mm dia cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr in charge. |
| 49 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopingcomplete all as specified and directed by Engr in charge. |
| 50 | Dismantling unservicable /cracked water tanks and removing from site capacity n exe 500 ltr complete all as spd and directed by Enr-in-charge.Add Note : Including demolition of existing RCC tank and making of brick pedstal for fixing new PVC water tank and removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 51 | Description all as per Item no 50 above but 1000 Ltrs capacity.complete all as specified and directed by Engr in charge. |
| 52 | S&Fin repairs Rotational moulded polythene water storage tanks (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 500 ltr.complete all as specified and directed by Engr in charge. |
| 53 | Discreption all as per Item no 52 above but 1000 Ltrs capacity.complete all as specified and directed by Engr in charge. |
| 54 | S&F in repair PVC Tank cover (thread type) for 500/1000 lit capacity.complete all as specified and directed by Engr in charge. |
| 55 | Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge |
| 56 | S&F repair 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings such as elbows, bends tees, nipples, union sockets, sockets etc and short pieceS&Fixed including making good wall by using mortar complete all as spd and directed by engr-in-charge. |
| 57 | Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge |
| 58 | S&F repair 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings such as elbows, bends tees, nipples, union sockets, sockets etc and short pieceS&Fixed including making good wall by using mortar complete all as spd and directed by engr-in-charge. |
| 59 | S&F Kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 750 mm x 600mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite & moulding the edges complete all as specified and directed by Engr in charge. Note:- the work should be executed in patch work. |
| 61 | S&F in repair Vitreous China wash down water closet pan (Pedestral pattern) 2 in 1 snowwhite with P trap 110mm, including slim soft close seat cover including of all accessoriescomplete all as specified and directed. Make :- (Cera Cat Part No -S1013214/Jaguar QPSWHT-7753P180UFSPMZ /Hindware Cat No -92077or equivalent. |
| 62 | S&F in repair Brass CP wall mixer/sink mixer (3 in1 mixer) for Hot and cold for 15mm borecomplete fixed to connection complete all as specified and direcetd by Engr-in-Charge. |
| 63 | S&F in repair mixer tap double lever wash basin mixer (Hot & cold) fancy type (swan neck) chromium plated brass screwed down high pressure with or without lettered hot and cold with long screwed shankS&Fly nut screwed for Iron pipe and fixed 15mm dia complete all as specified and direceted by Engr-in-Charge. |
| 64 | S&F towel rail 60 cm (D type) long of CP fixed with and including Chromium plated brassscrews and plastic cleats ( Minimum weight 190 gms) complete all as specified and direcetdby Engr-in-Charge. |
| 65 | S&F in repair PVC wall mounter cabinate of size (55x35x14 inch) looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engineer-in-charge. |
| 66 | S&F in repair soap dish,approximate size 160x160x90mm including chromium plated brass screws and plastic cleats.complete all as specified and directed by Engineer-in-charge. |
| 67 | S&Fof Paper holder chromium plated complete all as specified and direcetd byEngr-in-Charge. |
| 68 | M&L for preparation of old decorated surface of walls,scrapping down by mechanical means sender with internal dust extraction system for clean enviroment certified by manufacturer smoke ,soot,moulds,mos and efflorosent salt and trading oil and greese spotdown and stopping etc and applying two coat of exterior emulsion/ Apex paint over a coat of primer incl filling gaps with wall care putty and applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinary ,surfaces,usage complete all as specified and directed by Engr in charge. Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life offering ten years guarantee NOTE:-1. After completion of welcome work scraped material,dust,droped paint,white wash,OBD etc will be cleaned by contractor by washing rubbing down and making good of surfaces.2.Remove Kitchen reck,mirror etc and refix at its own existing place after painting work. |
| 69 | M&L rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 70 | M&L for prepration of new plastered surfaces of ceiling aply 3mm wall care putty and applying three coats of white washcomplete all as specified and directed by Engr in charge. |
| 71 | M&L welding in repairs to refix hinges, bolts, broken window hinges not exc 2.5 cm in length and thickness of metal to be welded n exc 6mm complete all as specified and directed by Engr in charge. |
| 72 | M&L for repairing of chajja, concrete floor , balconies by providing and applying of water proofing of 3 coat pidicrete URP with Fibre cloth (Make Pedilite) and 2 coat of membrane of star chemicals in cement mortar as per manufactural instruction and directed by Engr-in-charge. Including cleaning the concrete surface with wire brush or scruber to remove dirt and loose particals and repair concrete portion and priming of concrete surface by using above material.complete all as specified and directed by Engr in charge. |
| 73 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
