|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 3 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 4 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified |
| 5 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410-W(Gde-E-250) quality-B) including distance pieces, cleats etc complete all as specified and directed |
| 6 | S&F rolled mild steel Fe 410-W (Gde-E-250) quality-B in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 7 | M&L for Plates (plain or chequered) channels, Fe-290, Gde E-165, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete. |
| 8 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for |
| 9 | M&L for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in hols fast, PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and directed |
| 10 | M&L for Welding in repairs n. exc 2.5cm in length N exc 6mm all as specified and directed. |
| 11 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 12 | M&L for rendering 15 mm thick on fair faces of block/stone masonary/brick work or concrete surfaces finished even and smooth (without using extra lime or cement) in cement mortar 1:4 complete all as specified and directed |
| 13 | M&L for rendering 10 mm thick on fair faces of block/stone masonary/brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed |
| 14 | M&L for applying two coat of acrylic distempter on new plastered surfaces of any walls including preparation of surface all as specified and as directed |
| 15 | M&L Preparation of new surfaces of plastered surfaces of walls and applying two coats of white wash on undecorated surface of wall complete all as specified and as directed. |
| 16 | M & L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and as directed. |
| 17 | M & L for Preparation of old decorated surfaces of ceiling, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 18 | M & L for applying one coat of acrylic distempter on old treated surfaces of any walls including preparation of surface by washing, rubbing down and stooping of distempered surfaces all as specified and as directed. |
| 19 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed. |
| 20 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed. |
| 21 | Taking down of existing steel/sliding gates area not exceeding 10 square meter each and re-fixing the same in same position after necessary repairs such as cleaning, oiling, greasing, replacement of rusted nuts and bolts, including replacement of rusted profiles and welding / grinding as required for proper and smooth function complete all as specified and as directedNote: Rusted/Unserviceable steel sections if required to be change will be replace with new one and the same will be measurable & paid separately under respective items of this Sch |
| 22 | Taking down top assembly complete (except curtain & side bracket) of rolling shutter area not exceeding 10 square meter each, push pull or manual type and re-fixing the same in same position after necessary repairs such as cleaning, oiling, greasing, cleaning of the side guided channels, replacement of rusted nuts and bolts, including replacement of rusted profiles and welding / grinding as required for proper and smooth function complete all as specified and as directedNote: (i) Unserviceable spare part such as suspension shaft, spring, ball bearing etc if found unserviceable will be replace with new one and the same will be measurable & paid separately as supply in fix in repair under respective items of this Sch(ii) Gear box assembly if found unserviceable will be replace with new one and the same will be measurable & paid separately as supply & fix in repair under respective items of this schedule. |
| 23 | Supply and fix in repair only steel ball bearing suitable for rolling shutter complete all as specified and directed |
| 24 | Supply and fix in repair 40 mm bore G.I Pipe medium grade as in suspension shaft for rolling shutter, cut to size including necessary drilling / grinding etc complete |
| 25 | Supply and fix in repair helical type steel spring suitable for rolling shutter of size n.exc 10 Sqm complete all as specified and directed |
| 26 | Supply and fix in repair mild steel Safety lever locks sutaible for rolling shutters of size n.exc 10 Sqm complete all as specified and directed |
| 27 | Taking down guide channel of any size and supply & fix guide channel of size 75 mm deep fabricated with 3.15 mm thick plain black sheet for rolling shutter including necessary welding including painting of guide channel with 2 coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified. |
| 28 | Supply and fix in repair Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc, complete of standard make and fixed in position including one shop coat of primer including removal of old gear box assembly and other accessories complete all as specified and directed |
| 29 | S&F in repairs Steel rolling shutters made of 1.00 mm thick lath,with ball bearing,as specified including top cover,anchoring rod, hasp and staple, errected in position as indicated,complete gear operated type with bevel gear box and crank handle complete all as specified and directed. Note : - Ball bearing will be measured and paid seperately. Please Enable Macros to View BoQ information |
