|
| 1 | Repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), rolled and compacted with power roller 8 to 10 tonnes to required gradient and camber complete all as specified and as directed. |
| 2 | M&L for preparation existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and for unsurfaced WBM etc complete all as specified and directed. |
| 3 | M & L for appilying tack coat on existing bituminous cement concrete or primed granular surface to ensure a bond between the surface being paved and the overlaying course with priming tack coat VG-10 grade @ 5Kg/10Sqm of surface complete all as specified and directed. |
| 4 | M & L for semi dense bituminous concrete 30mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-30grade) @ 5.5% by weight of total mix & hydraulic lime filler , rolled and compacted to required camber and gradient complete all as specified and directed. |
| 5 | Providing and applying 2.5mm thick road marking strips(retro reflective) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser,propane tank heater and profile shoe heater,driven by experienced operator on road surface including cost of material,labour,T&P claning the road surface of all dirt, seals ,Oil,greade and forign material etc.complete all as specified and directed. |
| 6 | M&L for Moorum/red bajri filling in road side berms, laid in layers in 100 mm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 7 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mmwith PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 8 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed. |
| 9 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 10 | M & L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 11 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type – IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and\ fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification complete all as specified and as directed. |
| 12 | Manufacturing, supplying and fixing retroreflective Overhead informatory road signage andboards, made up of 2 mm thick aluminium sheet,face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification complete all as specified and as directed. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Note :- Minimum size of board 1 sqm. |
| 13 | Manufacturing, supplying and fixing retroreflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S.angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification complete all as specified and as directed. |
| 14 | S & F of Speed Breaker( yellow and black colour and plastic material with dimesnsion of 250mm x350mm x50mm, bearing capacity of 40 ton with concrete filling) specification complete all as specified and as directed. |
| 15 | S & F of convex mirror 80 cm/32 inch with pole of standard size( round shape, polycarbonate material, mirror of acrylic sheet unbreakable including with clamp and bolt) specification complete all as specified and as directed. |
| 16 | M & L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and exc 50 mm deep complete all as specified and as directed. |
| 17 | M & L for applying tack coat on existing bituminous, cement concrete or primed granular surface to ensure a bond between the surface being paved and the overlaying course with priming tack coat VG-10 grade at the rate of 10 kg per 10 sqm of surface complete all as specified and as directed. |
| 18 | M & L for bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed.Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be determined as per IRC 27: 2009 (amended upto date). The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹44 per kg.directed. |
| 19 | M & L for Moorum/red bajri filling in road side berms, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 20 | Supply and fixing, in repairs, Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. Please Enable Macros to View BoQ information |
