|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: SMART PERIODICAL SERVICES TO CERTAIN BLDG AND WELCOME MAINT, ROOF TREATMENT, PLUMBING WORK, LEAKAGE/ SEEPAGE/ ATT AND CONNECTED WORKS AT ABHM AND ABHM ANNEXE UNDER GE NEW DELHI Contract No: GE/ND-09/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 3 | M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer paint and 1.5mm thick wall care putty complete all as specified and directed. |
| 4 | M&L for Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed. |
| 5 | M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of ceiling surfaces complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment and applying two or more coats of Plastic emulsion paint contains an acrylic polymer emulsion, (ready mixed 1st quality) having of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on new work over a coat of primer over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment and applying texture paint as per design and shape and size shall be as directed by engr-in charge with 1st quality of glossy or matte plastic emulsion paint over a coat of base paint over 2 mm thickness cement base putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 8 | M&L for applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed. |
| 9 | M&L for preparation of old surfaces of walls by completet removal of existing and after preparation of surfaces applying primer and further applying two coat of cement base paint complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 11 | M&L for Washing, rubbing down and stopping of old surface and applying one coat of acrylic Smooth exterior paint of required shade complete all as specified and directed. |
| 12 | M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 13 | M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment and applying two coat of synthetic enamel paint over one coat of primer of steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 15 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. Note: WPC will be measured and paid saparately |
| 18 | M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Supply only liquie water proofing compound as per manufacture instruction complete all as specified and directed. |
| 20 | M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of distemper oil emulsion complete all as specified and directed. |
| 21 | M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed. |
| 22 | M&L for prepapation of new plaster serface of walls and applying two coats of acrylic emultion weather coat paint over a coat of primer over 1mm thick water proof putty complete all as specified and directed.Note: For application of periodical services refer para 21 of Sch 'A' notes.Note: Make and Brand for Periodical Services and painting items are as under:-(i) Make for wall putty for first coat: Birla wall seal putty/ Asian smart care putty/ JK wall maxx putty(ii) Make for wall putty second coat: Asian paint trucare acrylic wall putty/ Berger happy wall acrylic putty/ Nerolac premium acrylic wall putty(iii) Make for Exterior acrylic emulsion: Asian apex ultima/ Berger weather coat long life/ Nerolac excel total/ Birla Opus Primer exterior E70(iv) Make for OBD: Asian tractor UNO/ Berger bison acrylic distemper/ Nerolac beauty acrylic distemper(v) Make for synthetic enamel paint: Asian paint apcolite premium gloss enamel/ Berger luxol high gloss enamel/ Nerolac synthetic hi gloss enamel |
| 23 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry (white/ with pigment to match existing surafe) on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 marble powder : 2 marble chipping (one or more colour) 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble chippings complete all as specified including complete removing existing grit plaster (Payment for providing grooves shall be made seperately) complete all as specified and directed.Note :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to 6th storiess building and deploy skilled labourers to execute the work) including demolition of existing finished and remove all debries out of MoD land. |
| 24 | M&L for preparation of exposed surface of rusted steel reinforcement with metal wire brush cleaning the rusted surface free from loose rust and application of rust remover cum passivator applied with brush to the rusted reinforcement, application of rust remover with the help of wire brush, sand paaper and thoroughly washed with water with the help of pressure jet and allowing it to dry at all heights level complete including dismantling/ chipping off spalled/loose concrete cover of RCC surface of chajjas, parapets, railings, beams, columns and the like with out disturbing the core of RCC member with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.Note :- Surface area of RCC surface shall only be measured for the purpose of payment only. |
| 25 | M&L for Preparation of surfaces of steel reinforcement by cleaning thoroughly and providing, mixing and applying zinc-anti-rust agent as zink rich epoxy anticorrosive coating for corrosion protection system in two coats @ 0.20 kg/sqm/coat. The product should confirm carbonation resistance of 2 mm and bond strength > 1 N/ sq mm according to ASTM C 882-78. and as per manufacturers method of application to rebar corrosion protection system to reinforcement at all height levels complete all as specified and directed.Note :- Surface Area of steel reinforcement bar shall only be measured for the purpose of payment. |
| 26 | S&F additional reinforcement for strengthening the existing RCC structure, TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 27 | S&F steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/bond coat over steel mesh to receive concrete/ plaster complete all as specified and directed. |
| 28 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of avg 15 mm thickness.Note : Application of PMM shall be preferably be in coats of avg 15mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed. |
| 29 | M&L for laying Micro-concrete cement based pre-packed single component, chloride free, sulphate free, non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair as in chajjas,balcony beams, parapets/railing complete all as specified and directed.Note: (i) Work to be executed in multi storied bldg upto 25 meter height(ii) Steel scaffolding shall be provided and rate to be included in said items |
| 30 | M&L for uprooting plants (girth n.exc 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth complete all as specified and directed.Note: Work has to be executed in multi storey bldgs upto 25 Meter height |
| 31 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 32 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster including Removing un-serviceable material out side MOD land complete all as specified and directed. |
| 33 | M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 34 | M&L for providing cement concrete as in roof kerbs, levelling courses for making proper gradient/ slope or mud stops rounded or chamfered on edges or plain with B-1, 1:2:4 using stone aggregate mixed with water proofing compound as per manufacture instruction including necessary form work and including demolition complete all as specified and directed.Note: water proofing compound to be measured separately |
| 35 | Demolition of old damaged existing water proofing compound on RCC roof of any description in any position and specification and cleaning the surface thoroughly and removing materials from MOD land complete all as specified and directed. |
| 36 | M&L for (a) 15 mm thick screed bed in cement mortar 1:4 on roof surface or concrete surfaces, finished even and smooth (without using extra cement) mixed with WPC (200ml per 50kg of bag of cement) complete all as specified and directed.(b) Applying evenly a coat of bitumen primer @ 0.50 Kg/Sqm. (c) Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.0 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (d) Sealing edges well into grooves & protect with CM 1:2 complete all as specified and directed. Make: Ms Asian Paints Ltd/ Ms Berger Paints/ Ms STP Ltd/ Ms Torchtar Bitumen Pvt Ltd |
| 37 | M&L for cement concrete tiles of size 25 cm x 25 cm x 20 mm thick, machine pressed, set, jointed and pointed in neat cement slurry with grey cement and no pigment in approch roofs over and including screed bed or bedding layer of cement mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 38 | M&L for surface Preparation: The plaster/concrete/pcc tile surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects by the use of soft brush, air compressor, brushing to attain smooth levelled surface. Application of Asian Paints two component Epoxy Primer (Resin & Hardener) or two specific coat of equivalent brands as specified by manufacturer on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and laying fiberglass mesh reinforce and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. pvc/ The same coating shall be applied in two coats achieving a total thickness of not less than 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt complete all as specified and directed.Make: Dr Fixit Roof seal 148/ Pidilite100/ Asian Paint smart care damp proof/ SIKA 710/715 |
| 39 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for not exc 500 litres complete all as specified and directed. |
| 40 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding or including 500 litres to 1000 Litres capacity of tanks complete all as specified and directed. |
| 41 | Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 1000 Litres capacity of tanks complete all as specified and directed. |
| 42 | Dismantling water tanks of capacity upto 500 litres complete all as specified and directed. |
| 43 | Dismantling water tanks of capacity exc 500 but not exc 1000 litres complete all as specified and directed. |
| 44 | Dismantling water tanks of capacity exc 1000 liters but not exc 2000 liters complete all as specified and directed. |
| 45 | S&F 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 46 | S&F 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 47 | S&F 2000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 48 | Refixing of dismantlied water tank of any size and the same position complete all as specified and directed. |
| 49 | S&F in repair 25/20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum eight 15mm-142gms/ 20 mm - 210 gms /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 50 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed. |
| 51 | M&L for Brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story Bldg) complete all as specified and directed. |
| 52 | Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed. |
| 53 | M&L for Mild steel Framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed by Engg in charge. |
| 54 | M&L for Rectangular/squire Mild Steel Welded Wire Mesh of mesh size 25x25mm and dia 3mm fixed to MS frame work with welded complete all as specified and directed. |
| 55 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 56 | S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 57 | S&F structural mild steel work as in roof trusses (framed), trussed, post, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed. |
| 58 | M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 59 | M&L for providing injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 60 | M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed by Engg in charge. |
| 61 | M&L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 62 | Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed. |
| 63 | Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed |
| 64 | M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, floor, and like including 20mm thick screed bed in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of Udaipur green complete all as specified and directed. |
| 65 | M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in cooking platforms, lift wall, skirtings or in floor for design between udaipur green marble where ever required and likes on cement mortar bedding of 20mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 66 | All as per Item No 64.00 above but in vertical surface and 15MM back coat in CM 1:3 complete all as specified and directed. |
| 67 | Dismantling floor, hearth or wall tiling, interlocking, paver block any type or pattern including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 68 | M&L for super gloss vetrified floor tiles of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 69 | M&L for super gloss modern floor tiles of size (600mm X 1200mm) as in skirting laid on 10mm thick cement plaster in CM (1:3), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed. |
| 70 | M&L for 600x600mm vetrified fllor tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 71 | M&L for 600x600mm vetrified tiles as in skirting laid on 10mm thick cement plaster in CM (1:3) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed. |
| 72 | M&L for 600x600mm matt finished ceramic tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 73 | M&L for 1000x1000mm vetrified fllor tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed. |
| 74 | M&L for super gloss modern digital wall tiles of approved colour and design in vertical surfaces 1200x600mm including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 75 | M&L for glazed wall tiles for size 600x300mm of approved colour and design in vertical surfaces including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 76 | S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make: Hindware Cat part No/ Jaquar Cat No Part WC OPS-WHT-15853S300UF/ Kohlar Cat Part No 77739T-SL-0/ Cera cat Part No A1014110 |
| 77 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, valveless syphonic action type PVC low level dual action flushing cistern with inlet ball valve float & handle incl plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern 1st quality complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 78 | S&F in repair, ABS body Health Faucet including flexible pipe of 15 mm bore and min 1.00M long with and including 15 mm bore complete all as specified and directed.Make: Jaquar Cat Part No ALD-CHR-573/ Hindware cat Part No F160192CP/ KOHLER Cat Part No 12927IN-CP/ CERA Cat Part No F8030107AB |
| 79 | S&F in repair brass chromium plated toilet paper holder complete all as specified and directed.Make: Jaquar Cat Part No ACN-1151N/ Kohler Cat Part No 5633IN/ Hindware cat Part No F880003CP/ CERA Cat Part No F5002110 |
| 80 | S&F in repair wall/ floor mounted bath room vanity unit of overall size 600x450x450 (approx) with multiple cabins with outside openable one shutter made of water proof coating/ items/ with two nos of opening knob with hinges and auto closing and 16-18mm thick black polish granite complete all as specified and directed. |
| 81 | S&F in repair for Table Top white ceramic basin of approx Size: 50x40 cm table mounted type including cuplink with stainless steel bottle trap of 32mm size with 250mm long bottle trap and all fittings to proper functional condition complete all as specified and directed.Make: Jaquar Cat Part No JDS-WST-25911/ Hindware cat Part No 91238/ CERA Cat Part No S2020153/ Kohler Cat Part No K-31459IN-0 |
| 82 | S&F in repair vitreous china wash basin white oval type size 600 x 480 mm white in colour refix in counter platform of granite stone/RCC including provision of brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 83 | S&F in repair long body Brass Chrome Finish Single Lever Basin Mixer with 600mm Braided Connection Pipe complete all as specified and directed.Make: Cera cat Part No F2013452/ Hindware cat Part No F360012/ Jaquar cat Part No FLR-CHR-5005NB |
| 84 | S&F in repair 3 in 1 concealed single lever shower mixer, Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spout with 10 layer surface finished, Shower System owns a modern and stylish look, Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items all as specified by manufacture complete all as specified and directed.Make: Jaquar Cat Part No ORP-CHR-10125PM/ Hindware Cat Part No F570022CP/ KOHLER Cat Part No K-98754IN-4-CP/ CEARA cat Part No F1015403 |
| 85 | S&F in repair 5mm thick modern mirror of size 600x750mm fixed on decorative PVC cabinet with border design suitable for wash basin cabinet with fitted with LED Front and Backlight, Stepless Dimmable Wall Mirrors with Anti-Fog, Shatter-Proof, Memory, 3 Colors, Double LED Vanity Mirror with touch off/on switch in one mirror including all fixing arrangement complete all as specified and directed by Engg in charge. |
| 86 | S&F in repair Bib tab (spout) 15mm bore while with Wall Flange complete all as specified and directed.Make: Jaquar Cat Part No OPP-15037PM/ Hindware Cat Part No F340004CP/ KOHLER Cat Part No K-16093IN-4-CP CERA Cat Part No F1023151 |
| 87 | S&F in repair Angular Stop Cock with Wall Flange while complete all as specified and directed.Make: Jaquar Cat Part OPP-CHR-15053PM/ Hindware Cat Part No F570043CP/ KOHLER Cat Part No 11568IN-7BCP/ CERA CAT Part NO F1015201 |
| 88 | S&F in repairs 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge) complete all as specified and directed. |
| 89 | S&F in repair fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed.Make: KOHLER Cat Part No K-25066IN-CP/ Jaquar Cat Part No ACN-CHR-1181S/ Hindware Cat Part No F580008CP/ CERA CAT Part No F5006101 |
| 90 | Dismantling of floor of any size for EWC/IWC/Kitchen etc floor and removing out the cinder/concrete from sunken portion, grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Pastorate plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 5.00 Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.Note : plan area shall be considered for measurement and payment purpose |
| 91 | S&F in repair urinal Sensor Spare part KIT with fix Box are used for Unrinal POT, Integrated Sensor, Genuine Spare for Hindware CERA Parryware Jaquar all other standard POT sensor all as directed at site by Engg in Charge complete all as specified and directed. |
| 92 | S&F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters with dual flush and saparate switch operated small flush: 2-3 ltr and Large flush: 8 to 10 ltrs, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 93 | S&F in repair bib taps fancy type chromium plated 15mm bore dia of pipe with crutch or butterfly handle complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 94 | S&F for CP Urinal Water Spreader / Jet Spray suitable for urinal in repair with connecting pipe and nut complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 95 | S&F in repair vitreous china urinals, half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long bras screws pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, gratings and union for dischsrge pipe complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 96 | S&F in repair Plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 97 | S&F in repair plaster soft closing seat cover, white suitable for one piece EWC complete all as specified and directed.Make: Cera/ Hindware/ Jaguar |
| 98 | M&L for complete removal of existing roof paint and through clean and remove moss, grease, loose particle from the concrete, tile, plaster surface and applying one coat of primer (as recommended by manufacturer of same make of heat resistant paint) and apply 1st coat and apply 2nd coat in a perpendicular direction to the first coat after a drying interval of 4-6 hrs of specialised solar reflective index (SRI) coating paint on rooftops or exterior walls. The paint must utilize high-performance material to reduce heat ingress and enhance thermal comfort and the paint shall meet or exceed (SRI) 90-100 (as per ASTM E 1980), solar reflectance 70-80%, thermal Emittance: 0.75-0.85, thickness of two coat minimum 1mm, Elongation at break as per manufacturer limit all as per direction complete all as specified and directed by Engr in charge.Make: Dr Fixit heat shield/ Berger home shield/ Asian Apcotherm/ JK Profix |
| 99 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and directed. |
| 100 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 20 mm bore GI tubings complete all as specified and directed. |
| 101 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 25 mm bore GI tubings complete all as specified and directed. |
| 102 | S&F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints including all bends, tee, Y, bend pipe, shoes ets, fixed to walls/floor complete all as specified and directed. |
| 103 | S&F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints including all bends, tee, Y, bend pipe, shoes ets, fixed to walls/ floor complete all as specified and directed.Note: (a) Srl Item No 1.00 to 12.00, 22.00, 27.00, 33.00, 35.00 to 37.00, 52.00, 55.00, 56.00, 63.00, 64.00, 67.00, 69.00 & 71.00 to 75.00 of BOQ and all bathroom & sanitary fittings are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
