|
| 1 | ALMIRAH LARGE STEEL WITH SHELF/ALMIRAH LARGE STEEL1/2HX1/2S (FD- 1031/FD/E6/MAP/18) |
| 2 | Removing old existing unsv handles from Almirah large steel and S&F new CP steel handle of size100mm to Almirah large steel complete all as shown on drawing and as specified. |
| 3 | Removing old existing unsv lock from Almirah large steel and S&F new lock 75mm long, 06 lever with two keys to Almirah large steel complete all as shown on drawing and as specified. Make shall be of Godrej/Harrison/Plaza/Link |
| 4 | Removing old existing unsv locking assembly from Almirah large steel and S&F new locking assembly to Almirah large steel including making adjustment of door shutters & applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine complete all as shown on drawing and as specified. |
| 5 | Removing old existing unsv leg from Almirah large steel and S&F new leg made out of 1mm thick CRCA Sheet made to size and shape and welding at bottom of almirah after applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine and complete all as shown on drawing and as specified. |
| 6 | Removing old existing unsv butt hinges of Almirah large steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as specified. |
| 7 | M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as shown on drawing and as specified. |
| 8 | ALMIRAH MEDIUM STEEL (FD-1032, FD-67, FD-243) |
| 9 | Removing old existing unsv handles from Almirah medium steel and S&F new CP steel handle of size 100mm to Almirah medium steel complete all as shown on drawing and as specified. |
| 10 | Removing old existing unsv lock from Almirah medium steel and S&F new lock 75mm long, 06 lever with two keys to Almirah medium steel complete all as shown on drawing and as specified. Make shall be of Godrej/Harrison/Plaza/Link |
| 11 | Removing old existing unsv locking assembly from Almirah medium steel and S&F new locking assembly to Almirah medium steel including making adjustment of door shutter and applying one coat of synthetic enamel paint as approved over a coat of primer after preparation of steel surfaces complete with spray machine complete all as shown on drawing and as specified. |
| 12 | Removing old existing unsv leg from Almirah med steel and S&F new leg made out of 1mm thick CRCA sheet made to size and shape and welding at bottom of almirah after applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine complete all as shown on drawing and as specified. |
| 13 | Removing old existing unsv butt hinges of Almirah medium steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as specified. |
| 14 | M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as shown on drawing and as specified. |
| 15 | LOCKER STEEL (FD-1029/257) |
| 16 | Removing old existing unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size complete all as shown on drawing and as specified. |
| 17 | Removing old existing unsv butt hinges of Locker steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as specified and directed and shown on drawing. |
| 18 | Removing old existing unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape, size complete all as shown on drawing and as specified. |
| 19 | Removing old existing unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size complete all as shown on drawing and as specified. |
| 20 | M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as shown on drawing and as specified. |
| 21 | Removing old existing unsv leg from Locker steel and S&F new leg made out of 1mm thick CRCA sheet made to size and shape and welding at bottom of Locker after applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine complete all as shown on drawing and as specified. |
| 22 | CHAIR VARANDAH (FD-256) |
| 23 | Taking out old unsv Legs and S&F new Legs of 20 mm dia 1.6 mm thickness MS Conduit pipe complete all as shown on drawing and as specified. |
| 24 | Welding to broken joints of chair varandah complete all as shown on drawing and as specified. |
| 25 | Taking out old unsv stiffner and S&F new stiffner of 10 mm dia complete all as shown on drawing and as specified. |
| 26 | Removing of old unsv cane and re-canning of chair Varandah with 4 mm half round cane as per mat Pattern of superior quality cane of width & thickness as mentioned in complete all as shown on drawing and as specified. (Make of cane shall be Aryan/Shah/Binny/Premier) |
| 27 | Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes complete all as shown on drawing and as specified. |
| 28 | CHAIR VARANDAH OFFR (FD/E6/MAP-II/06) |
| 29 | Taking out old unsv Legs and S&F new Legs of 19 mm dia 1.6 mm thickness MS Conduit pipe complete all as shown on drawing and as specified. |
| 30 | Removing of old unsv PVC seat from chair and S & F new PVC Seat complete all as shown on drawing and as specified. |
| 31 | Removing of old unsv PVC Back from chair and S & F new PVC Back complete all as shown on drawing and as specified. |
| 32 | Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes complete all as shown on drawing and as specified. |
| 33 | M&L for welding to broken joints of Chair Varandah, complete all as specified and as directed by Engr-in-charge |
| 34 | CHAIR STEEL CB TUBULAR WITH ARMS (FD-75(M), FD-120) |
| 35 | Removing of old existing unsv Seat from chair and S&F New Seat complete all as shown on drawing and as specified. |
| 36 | Removing of old existing unsv Back from chair and S&F New Back complete all as shown on drawing and as specified. |
| 37 | Removing of old existing unsv arm handle from chair S&F New Arms handle , Size and shape are as per shown on drg complete all as shown on drawing and as specified. |
| 38 | Removing of old existing Stiffner and S&F new stiffner of 20mm wide and 4mm thick MS flat length as per size of chair duly welded to chair as per existing, complete all as specified and as directed by Engr-in-Charge. |
| 39 | Removing of old existing UNSV hard Rubber/PVC Shoes and S&F new complete all as shown on drawing and as specified. |
| 40 | CHAIR STEEL CB TUBULAR WITHOUT ARMS (FD-75(M)) |
| 41 | Removing of old existing unsv Seat from chair and S&F New Seat complete all as shown on drawing and as specified. |
| 42 | Removing of old existing unsv Back from chair and S&F New Back complete all as shown on drawing and as specified. |
| 43 | Removing of old existing Stiffner and S&F new stiffner of 20mm wide and 4mm thick MS flat length as per size of chair duly welded to chair as per existing, complete all as shown on drawing and as specified. |
| 44 | Removing of old existing UNSV hard Rubber/PVC Shoes and S&F new complete all as shown on drawing and as specified. |
| 45 | CHAIR CBA SPECIAL WITH HAND REST (FD-120(M)) |
| 46 | Removing old unsv Hand board and S&F New Hand Board made of 12mm wooden plank fixed with hinges piano type and screw of suitable size complete all as shown on drawing and as specified. |
| 47 | Taking out old unsv Legs and S&F new Legs of 19 mm dia 1.6 mm thickness MS Sq pipe complete all as shown on drawing and as specified. |
| 48 | Taking out old unsv stiffner and S&F new stiffner of 19 mm dia 1.6 mm thickness MS Sq pipe complete all as shown on drawing and as specified. |
| 49 | Welding to broken joints of chair complete all as shown on drawing and as specified. |
| 50 | Removing of old unsv cane and re-canning of Chair CBA with 2 mm half round cane as per mat Pattern of superior quality cane of width & thickness complete all as shown on drawing and as specified. (Make of cane shall be Aryan/Shah/Binny/Premier) |
| 51 | Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes complete all as shown on drawing and as specified. |
| 52 | CHAIR WRITING (FD/E6/MAP/12) |
| 53 | Removing old existing unsv seat and S&F new seat of 12mm thick hot pressed moulded plywood covered with 50mm thick desine with contured lumber support for extra comfort moulded foam of 50 to 55mm density and tapestry cloth all as approved . All minor repairs and wedling shall be done for smooth functioning. complete all as shown on drawing and as specified. |
| 54 | Removing old existing unsv back and S&F new back of 12mm thick hot pressed moulded plywood covered with 50mm thick desine with contured lumber support for extra comfort moulded foam of 50 to 55mm density and tapestry cloth all as approved . All minor repairs and wedling shall be done for smooth functioning complete all as shown on drawing and as specified. |
| 55 | Removing of old existing unsv tapestry cloth from seat and back of Chair and S&F new tapestry cloth to seat and back of Chair writing complete all as shown on drawing and as specified. (Note :- The tapestry cloth as per sample kept at GE office and as directed by Engr-In-Charge) |
| 56 | Welding to broken joints and repair to unfunctional parts for smooth function of Chair writng complete all as shown on drawing and as specified. |
| 57 | Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes complete all as shown on drawing and as specified. |
| 58 | Removing old existing unsv arm rest and S&F new arm rest of black integral skin polyurethane reinforced with MS insert and all weather resistance complete all as shown on drawing and as specified. |
| 59 | TABLE OFFICE CLERK STEEL (FD-381, FD-1004) |
| 60 | S&F the new top of same size as existing and shape made out of 18/19mm thick pre-laminated MDF board Exterior grade provided with hard wood beading as existing including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 61 | S&F new lock with two keys all as shown on drawing, including taking down old unserviceable one, complete all as shown on drawing and as specified.Make: Godrej/Harrison/Plaza |
| 62 | Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes complete all as shown on drawing and as specified. |
| 63 | TABLE COMPUTER (FD/E6/MAP/03) |
| 64 | S&F new top of size all as shown on drawing, made out of 18/19mm thick exterior grade MDF board exterior grade with alround 1.6mm thick PVC edging including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 65 | S&F the new keyboard tray of size all as shown on drawing, made out of 18/19mm thick pre-laminated MDF board exterior grade with alround PVC edging including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 66 | S&F the new drawer of size all as shown on drawing, made out of 18/19mm thick pre-laminated MDF board exterior grade with alround PVC edging, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 67 | S&F the new pull out mouse tray of size all as shown on drawing, made out of 18/19mm thick pre-laminated MDF board exterior grade with alround PVC edging, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 68 | S&F new Mild Steel (CRC) with Zink Coating telscopic channel of 300mm to 350mm size to Table computer, including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 69 | TABLE 3'x 3' STEEL (FD-1009) |
| 70 | Taking out unsv Top and S&F New Top of Prelaminated MDF Board Exterior Grade 18/19mm with 04 mm Teakwood beading all around it complete all as shown on drawing and as specified. |
| 71 | Taking out of unsv Legs and S&F new Legs of mild steel squire tube 25 mm as per existing shape and size complete all as shown on drawing and as specified. |
| 72 | Taking out unsv side rail and S&Fside rail of mild steel square tube 25 mm as per existing shape and size complete all as shown on drawing and as specified. |
| 73 | Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes complete all as shown on drawing and as specified. |
| 74 | TABLE BEDSIDE STEEL (FD/E6/MAP/15(R)) |
| 75 | S&F Upper drawer made of 18 mm thick prelaminated MDF board, exterior grade and provided with 6mm thick bottom of ISI marked commercial plywood of BWR grade and zinc coated MS telescopic chhanel of appropriate size as per drg and direction including taking down old unserviceable one, complete, all as specified and as directed. |
| 76 | S&F Lower drawer made of 18 mm thick prelaminated MDF board exterior grade provided with 6mm thick bottom of ISI marked commercial ply BWR grade & zinc coated MS telescopic channel as approved quality by Engr-in-charge, including taking down old unserviceable one, complete, all as specified and as directed. |
| 77 | S&F the new top made out of 18/19 mm thick exterior grade pre-laminated MDF board exterior grade with 04mm thick teak wood beading duly polished all as shown on drawing including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 78 | S&F the new side made out of 18/19 mm thick exterior grade pre-laminated MDF board exterior grade with 04mm thick teak wood beading duly polished all as shown on drawing including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 79 | S&F the newback ply of same size made out of 06mm thick commercial plywood all as shown on drawing including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 80 | S&F new 100mm long handle as per sample, shape as per drawing including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 81 | Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes complete all as shown on drawing and as specified. |
| 82 | BED HARD STEEL (FD/E6/MAP/08(R)) |
| 83 | Removing old existing unsv Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded commercial plywood of unpolished edging of approved quality with suitable size of nut & bolt with washer all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/Archid ply). |
| 84 | Removing old existing unsv board from head board and S&F new board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing and as directed. |
| 85 | All as per Sr.item No. 84 above here-in-before but foot board. |
| 86 | S&F in replacement hard rubber shoes at the bottom of leg complete all as shown on drawing and as specified. |
| 87 | Welding to broken joints/ fixing bt nut bolts of bed hard steel complete all as shown on drawing and as specified. |
| 88 | CHARPOY WITH HARD TOP STEEL (FD/MAP-II/01) |
| 89 | Removing old existing unsv Plytop from Charpoy and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded commercial plywood of unpolished edging of approved quality with suitable size of nut & bolt with washer all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/Archid ply). |
| 90 | S&F in replacement hard rubber shoes at the bottom of leg complete all as shown on drawing and as specified. |
| 91 | Welding to broken joints/ fixing bt nut bolts of Charpoy steel complete all as shown on drawing and as specified. |
| 92 | CHARPOY GI PIPE WITH 12MM THICK PLYWOOD (FD-220) |
| 93 | Removing old unsv plywood, tightening of loose components and S&F of new Plywood made out of 12mm thick commercial type BWR grade confirming to IS:303 of plywood as per existing shape,size with suitable size of nut & bolt with washer complete all as shown on drawing and as specified. (Make of Plywood : Kitply(Vista)/Century/Greenply/Archid ply). |
| 94 | Removing old unserviceable long rail from existing charpoy and S&F new long rail of 32mm dia medium grade GI pipe, duly threading at both end and fixing in position complete all as shown on drawing and as specified. |
| 95 | Cutting and converting the old unserviceable long rail as retrieved from Sl No 16.02 here-in-before into short rails and fixed to charpoy GI pipe duly threaded 30mm long at both side end including removal of old and broken short rails complete all as shown on drawing and as specified. |
| 96 | Cutting and converting the old unserviceable short rail into legs as retrieved from Sl No 16.03 and fixed to charpoy GI pipe duly threaded 30mm long at one side end and providing 5 mm thick round MS plate by smooth welding to bottom of the legs after removal of old existing broken legs complete all as shown on drawing and as specified. |
| 97 | Removing old Unsv/ broken Flat Iron strip and S&F new 5mm thick (5x25mm) FI stifnner of appropriate size duly painted with two coat of black synthetic enamel over a coated of red oxide/primer complete all as shown on drawing and as specified. |
| 98 | Removing old existing unserviceable elbow 3 way of charpoy and S&F new GI 3 way elbow med grade ISI marked complete all as shown on drawing and as specified. |
| 99 | CHARPOY IP FOLDING WITH HARD TOP (FD-388 (R)) |
| 100 | Removing old existing unsv Plytop from Charpoy IP folding with hard top and S&F of new 8mm thick plytop of siutable size, ISI marked, BWR phenol bonded commercial plywood of unpolished edging of approved quality with suitable size of nut & bolt with washer complete all as shown on drawing and as specified.. (Make of Plywood : Kitply(Vista)/Century/Greenply/Archid ply). |
| 101 | Welding to broken joints of charpoy IP folding complete all as shown on drawing and as specified. |
| 102 | S&F in replacement hard rubber/PVCshoes at the bottom of Charpoy IP folding complete all as shown on drawing and as specified. |
| 103 | CHAIR SCHOOL WITH HANDBOARD (FD/E6/MAP/05) |
| 104 | Removing old unsv Seat and S&F New Seat complete all as shown on drawing and as specified. |
| 105 | S&F in replacement hard rubber/ PVCshoes at the bottom of Rack shoe steel complete all as shown on drawing and as specified. |
| 106 | Removing old existing unsv Jali from Chair School with board and S&F new GI Jali duly painted with black paint all as shown on drawing and as directed. |
| 107 | Removing old unsv Hand board and S&F New Hand Board made of MDF board exterior garde with 4mm beading duly french glossy polished fixed with 6 screw of suitable scomplete all as shown on drawing and as specified. |
| 108 | CHAIR COMPUTER (FD/E6/MAP/01/TP) |
| 109 | S&F seat of chair with new seat of 12mm thick plywood commercial quality covered with 75mm thick U foam and best quality of tapestry cloth. Seat shall be fixed on frame with screw and including all minor repairs and welding etc, including taking down old unserviceable one, complete all as shown on drawing and as specified.Note:- (i) The Bid Price include the Pricing of Tapestry cloth for this item.(ii) The tapestry cloth to be provided as per sample kept at GE office and as approved by GE. |
| 110 | S&F back of chair with new back of chair shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 75mm thick U foam over shape and best quality of tapestry cloth. Back shall be fixed on frame with screw and including all minor repairs and welding etc, including taking down old unserviceable one, complete all as shown on drawing and as specified.Note:- (i) The Bid Price include the Pricing of Tapestry cloth for this item.(ii) The tapestry cloth to be provided as per sample kept at GE office and as approved by GE. |
| 111 | Removing of old existing unsv tapestry cloth from seat and back of Chair and S&F new tapestry cloth to seat and back of Chair writing complete all as shown on drawing and as specified.. (Note :- The tapestry cloth as per sample kept at GE office and as directed by Engr-In-Charge) |
| 112 | S&F arms rest complete as per existing shape, size and as per drg and including taking down old unserviceable one, complete, complete all as shown on drawing and as specified. |
| 113 | S&F hydrulic system of Chair computer for the adjustment of height complete including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 114 | S&F wheel base complete of Chair computer including taking down old unserviceable one, complete all as shown on drawing and as specified. |
| 115 | S&F new twin wheel castors as per existing shape and size and including taking down old unserviceable one complete all as shown on drawing and as specified. |
| 116 | TEAPOY VERANDAH (FD/E6/MAP/17) |
| 117 | Removing old existing unsv top from Teapoy verandah and supply and fixing the new top made out of 18/19mm thick pre laminated MDF board exterior grade provided with 4mm hardwood beading all around complete all as shown on drawing and as specified. |
| 118 | Welding to broken joints of Teapoy verandah complete all as shown on drawing and as specified. |
| 119 | S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg and as directed. |
| 120 | Removing old existing unsv GI Jali from Teapoy Verandah and S&F new GI Jali duly painted with black paint to all steel surface of Teapoy Verandah complete all as specified and directed and shown on drawing. |
| 121 | TABLE STEEL 1520 X 860 X 760MM (FD-1010) |
| 122 | M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (Make:- Green panel max/ Century/ Archid Ply/National Plywood). with 04 mm Teakwood beading complete all as shown on drawing and as specified. |
| 123 | S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg and as directed. |
| 124 | TRESTLE SR IRON (FD-1043) |
| 125 | Welding to broken joints of Trestle SR Iron complete all as shown on drawing and as specified. |
| 126 | BOOK CASE STEEL (FD-1028/FD-69(M)) |
| 127 | Removing old unsv handle and S&F new SS handle including nut and bolt with washer complete all as shown on drawing and as specified. |
| 128 | Removing old unsv /rusted shelves and S&F new shelves dully painted complete as per existing shape, size and complete all as shown on drawing and as specified. |
| 129 | Removing unsv lock and S&F new lock with duplicate key complete as per existing shape, size and complete all as shown on drawing and as specified. |
| 130 | Removing unsv /broken glass pane and S&F new glass pane complete all as shown on drawing and as specified. |
| 131 | RACK SHOES STEEL (FD/E6/MAP/02) |
| 132 | M&L for welding to broken joints of Rack Shoe steel, complete,complete all as shown on drawing and as specified. |
| 133 | S&F in replacement hard rubber/ PVCshoes at the bottom of Rack shoe steel all as shown on drg., complete all as shown on drawing and as specified. |
| 134 | Removing old existing unsv GI Jali from Rack Shoes Steel and S&F new GI Jali duly painted with black paint to all surface of Rack shoes steel complete all as specified and directed and shown on drawing. |
| 135 | PAINTING :- M&L for two coat of paint by means of spray painting machine with synthetic enamelled paint of appropriate shade as dedcided by Engr-In-Charge/GE and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery 1 grinder machine as required as trade practice complete all as shown on drawing and as specified to the following steel furniture items :- |
| 136 | Almirah Large Steel (FD-1031) |
| 137 | Almirah Medium Steel ( FD-1032, FD-67, FD-243) |
| 138 | Book Case Steel (FD-1028/FD-69(M)) |
| 139 | Charpoy with hardtop steel (FD/MAP-II/01) |
| 140 | Chair Varandah (FD-256) |
| 141 | Locker Steel (FD-1029/257) |
| 142 | Rack Shoes Steel (FD/E6/MAP/02) |
| 143 | Table 3'x3' Steel (FD-1009) |
| 144 | Table bed side steel (FD/E6/MAP/15 (R)) |
| 145 | Table office Clk steel (FD-1004) |
| 146 | Chair School with hand board (FD/E6/MAP/05) |
| 147 | Bed Hard Steel (FD/E6/MAP/08 (R )) |
| 148 | Charpoy IP Folding with Hard Top (FD-388 (R)) |
| 149 | Ladder for loft (FD-44/FD-238) |
| 150 | Table Steel 1520x860x760mm (FD-1010) |
| 151 | Trestle SR Iron (FD-1043) |
| 152 | Teapoy Varandah (FD/E6/MAP/17) |
| 153 | Chair varandah (FD/E6/MAP-II/06) |
| 154 | Chair CB steel tubular with arms (FD-75(M), FD-120) |
| 155 | Chair steel CB tubular without arms (FD-75 (M)) |
| 156 | Chair writing (FD/E6/MAP/12) |
| 157 | Table computer (FD/E6/MAP/03) |
| 158 | Chair CBA special with hand rest ( Steel Part) (FD-120(M)) Please Enable Macros to View BoQ information |
