|
| 1 | M&L for preparation of old plastered ceiling surfaces with removing of nails, making good holes, cracks if required and applying 2-coat of distemper oil emulsion on ceiling surface complete all as specified and directed. |
| 2 | M&L for preparation of old plastered wall surfaces with removing of nails, making good holes, cracks if required and applying 2-coat of distemper oil emulsion on wall surface complete all as specified and directed. |
| 3 | M&L for preparation of old steel surfaces of any descirption not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 4 | M&L for removing the plants from the surfaces of the building with complete roots, applying recommended chemical to prevent further growth as directed, making good the disturbed surface with cement mortar 1:3 and applying the same surface finish of the existing surface and finished to match with the surrounding surfaces including removal of debris etc., out side the premises complete all specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | Demolition of reinforced cemet concrete of any description and in any position including cutting rusted bar, making good with CM (1:4) of demolised rough/uneven surface and remuval of demolised material from site out side ARC campus complete all as specified and directed. |
| 7 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 and cutting chases for proper insertion of corrugated galvalume sheet and making good from top/bottom side complete all as specified and directed. |
| 8 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) includingholes drilled/notches cut out to receive MS bolts embaedded to concrete/fixing with fastener in existing brick/concrete surface distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-B complete all as specified and directed. |
| 9 | M&L for Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed. |
| 10 | M&L plate (plain/Chequered) Fe-290 (Gde-E-165) channel ,sqr cut or notched (ordinary and counter sunk) forming holed, without any attachment with riveted, bolted or welded attachment complete all as specified and directed. |
| 11 | M&L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide primer complete all as specified and directed. |
| 12 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel 0.50-0.53 mm thick of an colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150 of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick paint on top and back coating on sheet shall be 10 micron as in roof covering/sunshed/chajja fixed with self tapping screwes as specified and also surface should be dust free. (alloy of 55% aluminium, 43.5% zinc,1.5% silicon). Make : TATA BLUESCOPE STEEL Colorbond XRW steel OR EQUIVALENT (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer) complete all as specified and directed. |
| 13 | Prepartion of old surfcaes of wall by complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed. |
| 14 | Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 15 | Demolition brick work built in cement mortar or cement lime mortar including all quoins, arches,pillars etc but excluding ashlar facings, dressed stoneworks and precast articles complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.. |
| 17 | M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. |
| 18 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smoot on walls in cement mortar (1:4), make neeru finish to plastering surface using extra cement complete all as specified and directed. |
| 19 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smoot on walls in cement mortar (1:4), using water proofing chemical complete all as specified and directed. Note : WPC will be measured and paid for separately |
| 20 | Supply only integral water proofing compound complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick in CM (1:6) on fair face of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 22 | M&L for rendering 10-15mm thick in CM (1:4) on ceiling patchy surface in 2-3 layer at patch area on fair face of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 23 | M&L for preparing newly plastered Ceiling surfaces and applying two coat of distemper oil emulsion over a coat of chalk white primer complete all as specified and directed. |
| 24 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary preparation work complete all as specified and directed. |
| 25 | M&L for preparation newly plastered wall surface and applying two coate of distemper oil emulsion over a coat of chalk white primer. complete all as specified and directed. |
| 26 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) removal from site in low laying area or outside ARC campus complete all as specified and directed. |
| 27 | M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed. |
| 28 | M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor/path etc, 50mm thick, surfaces finished even and fair without using extra cement including forming 12mm thick expansion joint filled with pre-formed bituminus filler complete all as specified and directed. |
| 29 | M&L Continuous precast cement concrete solid block 1:2:4 type B1 using 20 mm graded aggregate set in CM 1:4 edging laid on end vertically tamping earth around solid block complete all as specified and directed. |
| 30 | M&L PCC (1:2:4) type B2 using 20mm graded agg finished even & smooth w/o using extra cement 50 mm thick as in plinth protection in cluding expansion joint complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.50 Sqm each incl removing to store complete all as specified and directed. |
| 32 | All as per item No - 31 here in before but exc 1.50 qm and n exc 4.0 Sqm each incl removing to store. |
| 33 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/Chowkat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cum,screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum comressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (Note : MS hold fast/lugs/SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account ahall be made. |
| 34 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge), minimum comressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary S.S screws shall be paid for separately). |
| 35 | M&L for Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories having area of window not exceeding 2.00 Sqm each. Note : The unit rate quoted by contractor includes cost of glass/wiremesh and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 36 | S&F 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specified and directed. |
| 37 | S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete allas specified and directed. |
| 38 | S&F 200mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 39 | S&F 125 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling/stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | M&L for Glazed ceramic tile of approved shade and pattern on verticle surface such as skirting/dado etc. 350 x 250 x 7mm/450 x 300 x 7mm thick, set and jointed in neat cement slurry over 10mm thick backing coat plaster in CM (1:4) and pointed in white or coloured cement to match to coloured of tiles complete all as specified and directed. |
| 42 | M&L Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick backing coa twith CM (1:6) complete all as specified and directed. |
| 43 | M&L Vitrified Ceramic tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm but n. exc 0.42 sqm , as in floors including 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed complete all as specified and directed. |
| 44 | All as per item No - 43 here in before but in skirting / dado including 10 mm thick rendering in CM 1:3 |
| 45 | S&F Vitreous China squatting pan of “Orissa Pattern” of size 580 x 440mm white with integral footrest complete including making good floors complete all as specified and directed. |
| 46 | S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed. |
| 47 | S&F in repair PTMT Angle stop valve, 15mm bore, any colour high pressure screwed for any type of pipe complete all as specified and directed. |
| 48 | S&F in repair PTMT Pillar tap long neck ,15mm bore, any colour high pressure screwed for any type of pipe complete all as specified and directed. Make : Prayag |
| 49 | S&F sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed. |
| 50 | S&F Soap dish PTMT, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 51 | S&F vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets, brass chromium plated 32 waste fitting coupling, waste pipe etc., complete all as specified and directed. |
| 52 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 53 | S&F PVC waste pipe 32mm dia complete all as specified and directed. Make : Cat No 327 of Prayag |
| 54 | S&F in repair PTMT Bib tap, 15mm bore, any colour high pressure screwed for any type of pipe complete all as specified and directed. |
| 55 | Material and Labour for rendering 15 mm thick in CM (1:4) including supply and mixing of WPC @3% by weight of cement on concrete surface of roof finished even and smooth without using extra cement over and including neat cement slurry @ 3 Kg /Sqm complete all as specified and directed. |
| 56 | Supply only Integral water proofing compound complete all as specified and directed. |
| 57 | Material and Labour for Cutting out cracks to V-section in existing wall/roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 58 | Material and Labour for Cutting out cracks to V-section in existing wall/roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. Please Enable Macros to View BoQ information |
