|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 |
| 2 | Dismantling door windows,and clerestory Window (Steel or Wood) Shutter including chowkhats,architrave hold fast etc complete and stacking with in 50 metres iead DSR NO 15.12.1 |
| 3 | Demolishing Brick work manually/by machanical means including stacking of steel bars and disposal of unserviceable material with in 50 meater lead as per direction of engineer in charge DSR NO 15.7.4 |
| 4 | 12 mm thick Plaster with 1:4 (1 cement : 4 coarse sand) mortar including labour material T&P etc complete as per direction of engneer in charge DSR NO 13.4.1 |
| 5 | Brick Work With common brunt clay F.P.C bricks of class designation 7.5 in superstructure above plinth level up to floor 5th level in all shapes and sizes in Cement mortar 1.4 (1 Cement 4 Coarse sand) DSR NO 6.4.1 |
| 6 | Cement concreate flooring 1.2.4 finishing with a floating coat of neat cement including cement slurry including supply of all material Iabour and T&P etc.required for proper completion of the work. DSR NO 11.3.1 |
| 7 | Steel work in built up tubular (round square or rectangular hollow tubes etc) trusses etc including cutting holsting fixing in position and applying a priming coat of approved steel primer including welding and bolted with specail shaped washers etc complete Hot finished welded type tubes DSR NO 10.16.1 |
| 8 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25 mm thick ..DSR NO 9.18.2 |
| 9 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 300x16 mm DSR 9.62.1 FOR OUTER DOOR |
| 10 | Providing and fixing bright finished brass handles with screws etc.complete: 125 mm DSR 9.81.1 |
| 11 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete DSR 9.82 |
| 12 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. DSR 9.51.1 |
| 13 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR-11.39 |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointingwith grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR 11.41.1 (size 500x500) |
| 15 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 16 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .DSR-13.81.1 |
| 17 | Finishing walls with water proofing cement paint of required shade .( Old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. ) DSR-13.109.1 |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. DSR-13.99.1 |
| 19 | providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall. 15 mm dia. nominal bore DSR NO 18.8.1 |
| 20 | providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall, 20 mm dia. nominal bore DSR NO 18.8.2 |
| 21 | providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall, 25 mm dia. nominal bore DSR NO 18.8.3 |
| 22 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore. DSR 18.49.1 |
| 23 | Supply and fixing of 100 mm. dia P.V.C. Pipe. DSR 19.1.1 |
| 24 | Providing and fixing wash basin with ci brackets 15mm C.P. brass pillar taps 32mm C.P. brass waste of standred patteran including painting of fitting and brackets cutting and making goodthe walls wherever require white vitreous china surgeon type wash basin size 660*460 mm with a pair of 15mm c.p. brass pillar taps DSR 17.7.8 |
| 25 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32mm dia (Semi rigid pipe) DSR 17.28.1.1 |
| 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1 |
| 27 | providing and fixing one piece construction white vitreous china squatting plate with an inteagral longitudinal flushing pipe white P.V.C. automaticflushing cisten with fitting bstandred size G.I./P.V.C. flush pipe for back and frunt flush with standred spreader pipes with fitting G.I. clamps and cp brass coupling complete including painting of fitting and cutting and making good the walls and floors etc whereever required single squatting plate with 5 liter P.V.C. automatic flushing cisten DSR NO 17.6.4 |
| 28 | providing and fixing white vitreous china flat back back half stall urinal of size 580*380*350 mm with white PVC automatic flushing cistern with fittings standred size C.P. brass flush pipe spreaders with unions and clamps with waste fitting C.I. trap with outlet grating and other couplings in CP brass including painting of fitting and cutting and making good the walls and floors wherever required range of four half stall urinals with 10 liter P.V.C. automatic flushing cistern DSR NO 17.5.1 |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 30 | Earthwork in excavation by machanicalmeans (hydraulic excavator) in foundation trenches or drains including dressing of sides and ramming of bottoms for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m DSR NO 2.8.1 |
| 31 | Providing and laying in position cement concrete of specified grade with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm noninal size) DSR NO 4.1.5 |
| 32 | Brick Work With common brunt clay F.P.C (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 Cement 4 Coarse sand) DSR NO 6.1.1 |
| 33 | Providing and laying in position cement concrete of specified grade with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm noninal size) DSR NO 4.1.3 |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53.1 |
| 35 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) DSR 21.3.2 |
| 36 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR14.6.1 |
| 37 | Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing DSR NO 17.32.4 |
| 38 | Providing and fixing toilet paper holder C.P. brass DSR NO 17.34.1 |
| 39 | Providing and fixing15 mm thick false ceiling tiles at all hight with integral densified calcium silicate reinforced with fiber and natural filler fales ceiling tiles of size 595*595 mm of approved texture design and patterns having NRC of .50 as per IS 82525 .1987 light reflectance of 85% Non combustible as per BS.476 fire performance as pes BS 476 humidity resistance of 100% thermal conductivity true horizontal level on the existing frame work conisting of T sections and L sections suitably fixed according to tile size as per direction of Engineer in charge DSR NO 26.25 |
| 40 | Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50 mm x 50 mm hard wood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 9 mm thicness DSR NO 26.6E1 |
| 41 | Electricity wiring boards fans & panel boards |
| 42 | Supply and fixing of Split AC |
| 43 | Supply of Chairs for staff and advocate |
| 44 | Supply of Tables for staff and advocate |
| 45 | Supply of Almirah |
| 46 | Supply of Rack |
| 47 | Dice Table |
| 48 | Window Curtains |
| 49 | Hall partion with ISI Ply |
| 50 | LED board, Logo steel letters |
| 51 | Making of Wooden Dice (platform) in court room |
| 52 | Making of witness box (platform) in court room |
| 53 | Miscellaneous work & reinstallation of old furniture |
| 54 | Supply of Sofa set. Please Enable Macros to View BoQ information |
