|
| 1 | Renovation of Toilet (washroom) |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal area as per direction of Engineer-in-charge. (Vol-2, P.No.193, I.No. 19.56 ) |
| 3 | Aluminium: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (Vol-2, P.No.88,89, I.No. 11.35.2.3) |
| 4 | Glazing: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications. (Vol-2, P.No.89 I.No. 11.37.3) |
| 5 | Silicon sealant: Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete: Upto 5mm depth and 5 mm width including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer in- Charge. (Vol-2, P.No.91 I.No. 11.42.1) |
| 6 | Latch and lock: Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. (Vol-2, P.No.91 I.No. 11.42.1) |
| 7 | Handle: Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (Vol-2, P.No.105 I.No. 12.62) |
| 8 | Hydraulic door closer: Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (Vol-2, P.No.105 I.No. 12.59) |
| 9 | Door stopper: Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. (Vol-2, P.No.200 I.No. 20.28) |
| 10 | Ceramic Floor: Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (Vol-2, P.No.60 I.No. 9.10) |
| 11 | Adhesive: Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. (Vol-2, P.No.61 I.No. 9.14) |
| 12 | Etching for Glass: Supplying and Pasting of Etching for Glass ( Sparkle etching 120 micron with pasting) (market rate) |
| 13 | Water closet : Providing and fixing floor mounted, white vitreous china single piece, double traps symphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge (Vol-2, P.No.138 I.No. 14.47) |
| 14 | Mirror: Providing and fixing 600x450mm bevel Lead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, including cost of materials, labour complete as per specifications. (Vol-2, P.No.136, I.No.14.31) |
| 15 | Wash basin: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers (Vol-2, P.No.133, I.No.14.7.8) |
| 16 | Liquid soap container: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g (Vol-2, P.No.137, I.No.14.38) |
| 17 | Towel rail: Providing and fixing Towel rail (Rectangular) made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium (Vol-2, P.No.144,I.No.14.87) |
| 18 | Liquid soap dispenser: Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a Economy (Vol-2, P.No.144, I.No.14.85) |
| 19 | Water storage tank: Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Vol-2, P.No.123, I.No.13.34) |
| 20 | UPVC Pipes: Providing and fixing Unplasticized Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal dia Pipes (Vol-2, P.No.125, I.No.13.50.3) |
| 21 | Providing and fixing Unplasticized Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 15 mm nominal dia Pipes (Vol-2, P.No.125, I.No.13.50.1) |
| 22 | Bib cock Two way: Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a) Economy (Vol-2, P.No.140, I.No.14.56 |
| 23 | Angle cock: Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a) Economy (Vol-2, P.No.139, I.No.14.52) |
| 24 | Waste pipe: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40mm dia (Vol-2, P.No.136, I.No.14.28.2.2) |
| 25 | Bidet spray: Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a Premium (Vol-2, P.No.145, I.No.14.95) |
| 26 | Paper holder: Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class a) Premium (Vol-2, P.No.145, I.No.14.93) |
| 27 | Rigid PVC: Providing and fixing on wall face unplasticized Rigid PVC rain water pipes of 50mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (Vol-2, P.No.125, I.No.13.50.6) |
| 28 | Rigid PVC: Providing and fixing on wall face unplasticized Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (Vol-2, P.No.125, I.No.13.49 |
| 29 | Valve: Providing and fixing in position 65mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.10 / 13.13 |
| 30 | Inspection chamber: Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non-modular) bricks of class designation 3.5 (Vol-2, P.No.126, I.No.13.53) |
| 31 | Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. |
| 32 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge. |
| 33 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 34 | Fixing of available Existing Aluminium materials re used in various places Please Enable Macros to View BoQ information |
