|
| 1 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as requied |
| 2 | 3 1/2x 70 sq. mm |
| 3 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as reqd |
| 4 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as reqd |
| 5 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 Grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 6 | Upto 35 sq mm |
| 7 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as reqd. |
| 8 | 4x16 sq mm |
| 9 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground ( 75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as reqd |
| 10 | 63mm dia (OD-63 mm & ID -51 mm nominal) |
| 11 | Supply, installation, testing and commissioning of pre-wired, 150 watt, street light delievering 120 lumens/watt, IP 66 protection, PDC housing and high impact resistance (IK07) glass cover lumimiare 220-220V, 50 hz on existing street light pole/wall including all accessories and connection etc as required. (Philips make, Cat no. BRP335 LED180 CW R5C FG PSU S1 V1 or equivalent Model of Thorn/Trilux) |
| 12 | Supplying of one number PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1kV grade of size 4 x 16 sqmm etc as required |
| 13 | Supplying of one number PVC insulated and PVC sheathed/XLPE copper conductor un armoured power cable of 650/1100 kV grade of size 3C x 2.5 sqmm etc as required |
| 14 | Supplying and Fixing of 500 mm long Over hang following arm bracket made out of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole including nut bolts etc as required (Make: Bajaj/Transrail/Jindal/Tata |
| 15 | Double Arm Bracket |
| 16 | Single Arm Bracket |
| 17 | Supply, Testing and commissioning of foolowing size HOT dip galvanized octagonal steel pole made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick to accommodate the fitting on existing RCC foundation i/c S/F of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts & nuts with 3 Nos. and 2 Nos. washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes (a) 6mm thick pheenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door ( b) S/F of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6Amp SPMCB 10 KA 'C' Series - 1 No. i/c mounting on DIN Channel. This includes making of foundation of size 1200 mm x 400mm x400mm made of cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 40 mm nominal size) with provision of IN and OUT slot for cable entry including excavation of and refilling etc. as required (Make : Bajaj/ Transrail/Jindal/Tata) |
| 18 | 5 Meter height Please Enable Macros to View BoQ information |
