|
| 1 | Concealed wiring of Light/Fan point with 2.5 Sqmm multistrand cupper wire, Supply, laying and wiring with 2.5 Sqmm multistrand Finolex make copper wire of approved quality in 25mm black PVC pipe and 2\\" height JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth, supply and fixing of14 SWG required size MS box with 3MM thick white hylam cover including 4 Nos steel screw and cup washer, ceiling rose, holder, 5A switch etc. wherever required complete with fittings. Each fan point shall be controlled by one switch and two light point shall be controlled by one switch. All materials shall be supplied by party and work shall be carried out as per direction of the Engineer-in-Charge | Concealed wiring of Light/Fan point with 2.5 Sqmm multistrand cupper wire, Supply, laying and wiring with 2.5 Sqmm multistrand Finolex make copper wire of approved quality in 25mm black PVC pipe and 2\\" height JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth, supply and fixing of14 SWG required size MS box with 3MM thick white hylam cover including 4 Nos steel screw and cup washer, ceiling rose, holder, 5A switch etc. wherever required complete with fittings. Each fan point shall be controlled by one switch and two light point shall be controlled by one switch. All materials shall be supplied by party and work shall be carried out as per direction of the Engineer-in-Charge |
| 2 | Supply and fixing of 5pin 240 Volt 5 Amp socket(5 pin) & 5A switch on Board and wiring with 2.5 Sqmm multistrand copper wire of approved quality and earthing connection of third pin with 2.5 Sqmm copper wire(Green colour) as required on existing Board and as per direction of Engineer-in-Charge. | Supply and fixing of 5pin 240 Volt 5 Amp socket(5 pin) & 5A switch on Board and wiring with 2.5 Sqmm multistrand copper wire of approved quality and earthing connection of third pin with 2.5 Sqmm copper wire(Green colour) as required on existing Board and as per direction of Engineer-in-Charge. |
| 3 | Consealed wireing to 15Amps plug point with 6 sqmm Multistrand PVC insulated single core copper conductor wire including supply of 15AMPS switch and sockets in 25mm black PVC conduit pipe with one run of 2.5sqmm copper wire as continious earth with required size of 16SWG MS box with 3mm thick with white hylem cover and including 4nos of steel screws and cup washer with fitting as required and as per the direction og Engineer In charge. | Consealed wireing to 15Amps plug point with 6 sqmm Multistrand PVC insulated single core copper conductor wire including supply of 15AMPS switch and sockets in 25mm black PVC conduit pipe with one run of 2.5sqmm copper wire as continious earth with required size of 16SWG MS box with 3mm thick with white hylem cover and including 4nos of steel screws and cup washer with fitting as required and as per the direction og Engineer In charge. |
| 4 | Supply, installatoin, testing and commissioning of prewired wall/ceiling/false ceiling mounted LED light fixture complte including providing 2 nos of wood round blocks for fixing the fitting and down rod as required, and supply and laying of 3cx1.5 sqmm flexable copper cable as required and as per direction of Engineer-in-Charge. | Supply, installatoin, testing and commissioning of prewired wall/ceiling/false ceiling mounted LED light fixture complte including providing 2 nos of wood round blocks for fixing the fitting and down rod as required, and supply and laying of 3cx1.5 sqmm flexable copper cable as required and as per direction of Engineer-in-Charge. |
| 5 | Sub-main circuit wiring: Supply and laying of multistrand copper wire of approved quality inside 25 MM independent black PVC conduit pipe 2\\" height PVC JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth. The job includes termination of both ends through proper jointing materials. All the materials shall be supplied by the party. The work shall be carried out as direction of Engineer-in-Charge. | Sub-main circuit wiring: Supply and laying of multistrand copper wire of approved quality inside 25 MM independent black PVC conduit pipe 2\\" height PVC JB with 1 run of 2.5 Sqmm copper wire(Green colour) as continuous earth. The job includes termination of both ends through proper jointing materials. All the materials shall be supplied by the party. The work shall be carried out as direction of Engineer-in-Charge. |
| 6 | Supply, installation, testing and commissioning of 1200mm sweep 220/240 Volt ceiling fan including fan hook, suspension rod of required length, earthing, electronic regulator including supply and laying of 3cx2.5 Sqmm Flexable copper wire as required and asper direction of the Engineer-in-Charge. | Supply, installation, testing and commissioning of 1200mm sweep 220/240 Volt ceiling fan including fan hook, suspension rod of required length, earthing, electronic regulator including supply and laying of 3cx2.5 Sqmm Flexable copper wire as required and asper direction of the Engineer-in-Charge. |
| 7 | Supply, installation, testing and commissioning of 300mm sweep 240 Volt Exhaust fan including making holes on walls providing necessary brackets/support for fixing the fan, making necessary connections, poroviding gravity drop louvers etc. finishing the hole necessary civil works as required and as per the direction of Engineer-in-Charge. | Supply, installation, testing and commissioning of 300mm sweep 240 Volt Exhaust fan including making holes on walls providing necessary brackets/support for fixing the fan, making necessary connections, poroviding gravity drop louvers etc. finishing the hole necessary civil works as required and as per the direction of Engineer-in-Charge. |
| 8 | Supply and installation of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6\\"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. Detailed specificatiobn shall be as per annexure-II and all material required for installation of chemical earthing shall be under the scope of the party. | Supply and installation of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6\\"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. Detailed specificatiobn shall be as per annexure-II and all material required for installation of chemical earthing shall be under the scope of the party. |
| 9 | Supply and installation of earthing strips 25x3mm along trenches including excavation, cutting and fixing to wall, embedding inside walls and floors welding at joints, providing anti-corrosive paints of bitumin and jute covering for welding, clamping, necessary hardware for connection etc. including all labour and material complete as required and as per direction of Engineer-in-Charge. | Supply and installation of earthing strips 25x3mm along trenches including excavation, cutting and fixing to wall, embedding inside walls and floors welding at joints, providing anti-corrosive paints of bitumin and jute covering for welding, clamping, necessary hardware for connection etc. including all labour and material complete as required and as per direction of Engineer-in-Charge. |
| 10 | CABLE & CABLING:--Laying of cable(horizontal & vertical)of different voltage grades and size of following on existing steel structures in buried trenches, pulling through pipes, clamping on walls/roof (supply of proper clamps and hardware including supply and fixing of aluminum strips, identification tags ,supply and spreading of fine river sand and supply and spreading of approved 2nd class bricks of 3” thickness in cable trenches in 3 sides of laid cable for cable protection etc. Making of straight through joints (if required) transportation from store/yard to actual site of laying ,unpacking including all labor and material complete as per specification and direction of engineer –in-charge.The cable shall be supplied by Nalco. | CABLE & CABLING:--Laying of cable(horizontal & vertical)of different voltage grades and size of following on existing steel structures in buried trenches, pulling through pipes, clamping on walls/roof (supply of proper clamps and hardware including supply and fixing of aluminum strips, identification tags ,supply and spreading of fine river sand and supply and spreading of approved 2nd class bricks of 3” thickness in cable trenches in 3 sides of laid cable for cable protection etc. Making of straight through joints (if required) transportation from store/yard to actual site of laying ,unpacking including all labor and material complete as per specification and direction of engineer –in-charge.The cable shall be supplied by Nalco. |
| 11 | Excavating trenches 800x400mm wide for laying of cable, supply and filling of sand 75mm below and 75mm above the cable with brick protection on nthree sides of cable , back filling the trench and restoreing to original shape , disposing the surplus earth to out side premisess. | Excavating trenches 800x400mm wide for laying of cable, supply and filling of sand 75mm below and 75mm above the cable with brick protection on nthree sides of cable , back filling the trench and restoreing to original shape , disposing the surplus earth to out side premisess. |
| 12 | END TERMINATION:-Termination on switchgear, transformer, feeder piller, street light marshalling boxes, pole top boxes, lighting control panel of following sizes including connection of leads cutting stripping of cable insulation, providing compression type terminals, crimping of cable including supply of double compression cable glands, lugs etc. and all labour, supply of all material complete as per direction of engineer –in-charge. | END TERMINATION:-Termination on switchgear, transformer, feeder piller, street light marshalling boxes, pole top boxes, lighting control panel of following sizes including connection of leads cutting stripping of cable insulation, providing compression type terminals, crimping of cable including supply of double compression cable glands, lugs etc. and all labour, supply of all material complete as per direction of engineer –in-charge. |
| 13 | Supply and installation of 65mm dia medium gauge GI pipe on floor/wall/along poles including supply of MS clamps fasteners complte as required and as per direction of Engineer-in-Charge | Supply and installation of 65mm dia medium gauge GI pipe on floor/wall/along poles including supply of MS clamps fasteners complte as required and as per direction of Engineer-in-Charge |
| 14 | Supply, installation, testing and commissioning of Industrial power socket with 20A MCB with top complete box etc, | Supply, installation, testing and commissioning of Industrial power socket with 20A MCB with top complete box etc, |
| 15 | Supply & fixing of 10 way (4+24) double door surface/recess mounting, vertical type, 415 V , TPN MCB distribution Board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. The DB shall suitable for mounting 1 no 63A 4P, ELCB/RCBO along with 10 nos 20Amp DP MCBs. | Supply & fixing of 10 way (4+24) double door surface/recess mounting, vertical type, 415 V , TPN MCB distribution Board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. The DB shall suitable for mounting 1 no 63A 4P, ELCB/RCBO along with 10 nos 20Amp DP MCBs. |
| 16 | Supplying & fixing following rating and breaking capacity and pole RCBO/ELCB with thermomagnetic release and terminals spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connects etc asrequired (a) 63A, 10KA, 4 pole RCBO/ELCB | Supplying & fixing following rating and breaking capacity and pole RCBO/ELCB with thermomagnetic release and terminals spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connects etc asrequired (a) 63A, 10KA, 4 pole RCBO/ELCB |
| 17 | Supplying & fixing 20A rating , 240/415 V, 10KA, \\"c\\" curve, miniature circuit breaker suitable for inductive of following poles in the existting MCB DB complete with connections, testing & commissioning et as required & as per direction of EIC. | Supplying & fixing 20A rating , 240/415 V, 10KA, \\"c\\" curve, miniature circuit breaker suitable for inductive of following poles in the existting MCB DB complete with connections, testing & commissioning et as required & as per direction of EIC. |
| 18 | Supply & fixing of Occupancy sensor as per attached specification (Annexure-II). Party to submit the test certificates as per the demand of Nalco | Supply & fixing of Occupancy sensor as per attached specification (Annexure-II). Party to submit the test certificates as per the demand of Nalco |
| 19 | Supply, installation , testing and commissioning of prewired wall mounted 90W LED street light fixture with supporting assoceries including providing and fixing of GI bend pipe approximate 1.5meter length with junction boxes etc as required and as per the direction of EIC | Supply, installation , testing and commissioning of prewired wall mounted 90W LED street light fixture with supporting assoceries including providing and fixing of GI bend pipe approximate 1.5meter length with junction boxes etc as required and as per the direction of EIC |
