|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 3 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Providing and laying of Nallah Muck / RBM /GSB including ramming,watering ad leveling not exceeding 90mm in layers with carriage of same from approved source upto site of work complete.under floors |
| 6 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level) |
| 7 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works above plinth level upto level V) |
| 8 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 9 | Centering & shuttering including strutting, propping etc including removal of form work for Foundations,, footings, bases of columns ,ramp,steps etc. for mass concrete. |
| 10 | Centering & shuttering including strutting, propping etc including removal of form work Lintel, beams, plinth beams, girders, bressumers and cantilevers etc. |
| 11 | Centering & shuttering including strutting, propping etc including removal of form work Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Centering & shuttering including strutting, propping etc including removal of form work Columns, pillars, piers, abutments, posts and struts. |
| 13 | Brick work with F.P.S (non modular) bricks of class designation 75 in 1:6 mix (1 cement: 6 coarse sand) in super structure including carriage of all materials from approved sources upto site of work complete. (above plinth level upto floor V ) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported KD wood/ SILVER WOOD |
| 15 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters in for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 30mm thick imported KD Wood/silver wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with of necessary screws, excluding panelling which will be paid for separately, all shutter complete as per direction of Engineer-in-charge imported KD wood 30mm thick |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick imported kailwood |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more including With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 19 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 20 | Poviding and fixing of aniodised Alumimum fittings as aproved by incharge engineer at site |
| 21 | T bolt 100mm |
| 22 | T bolt 150mm |
| 23 | Handles125mm |
| 24 | Handle 150mm |
| 25 | L-Drop Link 200 mm |
| 26 | 12 mm thick cement sand plaster in 1:6 with all leads lifts, carriage and curing |
| 27 | 6mm thick cement sand plaster in 1:3 with all leads lifts, carriage and curing |
| 28 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick |
| 29 | Providing and fixing of float glass pane 3.5mm thick on windows shutters all job complete including all neceseery fittings as per directions of engineer in charge. |
| 30 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20 mm nominal size stone aggregate. |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. . In colour such as White, Ivory, Grey, Fume Red Brown |
| 33 | structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded |
| 34 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets( weight not less than 11 kg) of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges valleys eaves of matching colour all complete as per directions |
| 35 | Plumbing |
| 36 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 37 | Providing/Fixing of cp brass fittings of standard quality like jaquar, cera, hindware or eqv conferming to IS:8931 sample to be approved by incharge engineer |
| 38 | Bib Cock |
| 39 | grating |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 41 | 15 mm dia pipe |
| 42 | 20 mm dia pipe |
| 43 | 25 mm dia pipe |
| 44 | Providing and fixing PVC SWR pipe Type B conferming to Is 13592 with all necessary fittings and fixtures (Prince fenolac or eqv) |
| 45 | 100 mm dia pipe |
| 46 | 75 mm dia pipe |
| 47 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 48 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with Udaipur green marble 16mm |
| 49 | Construction of brick Masonry Inspection chamber 450x4550x220 inside size using FBS bricks in 1:4 Mix finished inside with 1:4 Cement motor with a coat of neat cement sullary with GI frame and cover and laid on suitabe foundation on levelled ground |
| 50 | Septic Tank |
| 51 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 52 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 53 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 54 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level) |
| 55 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. |
| 56 | Centering & shuttering including strutting, propping etc including removal of form work Suspended floors, roofs, landings, balconies and access platforms. |
| 57 | Brick work with F.P.S (non modular) bricks of class designation 75 in 1:6 mix (1 cement: 6 coarse sand) in super structure including carriage of all materials from approved sources upto site of work complete. (all works upto plinth level) |
| 58 | 15 mm thick cement sand plaster in 1:6 with all leads lifts, carriage and curing |
| 59 | Dry random rubble masonry with hard stone in soakage pit using quary stone with bond stone including all leads lifts ,carriages from approved source uptosite of work |
| 60 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20 mm nominal size stone aggregate. |
| 61 | Providing and fixing of cast iron grating type Mh man hole covers 450 x450mm all complete Please Enable Macros to View BoQ information |
