Tender For Macadamization Of Main Road Khanater To Tanda 50Mm Thick Bm,25Mm Thick Ogpc Seal Coat In Patches (Under Ard) Aaa:-Superintending Engineer,Pwd(R&B)Circle Poonch Order No 63 Of 2025,Dated 12-12-2025, Poonch-Jammu And Kashmir
TDR : 55408474
Tender Notice
BOQ
7 Days Left
Poonch
Jammu And Kashmir
Tender For Macadamization Of Main Road Khanater To Tanda 50Mm Thick Bm,25Mm Thick Ogpc Seal Coat In Patches (Under Ard) Aaa:-Superintending Engineer,Pwd(R&B)Circle Poonch Order No 63 Of 2025,Dated 12-12-2025
Name of Work:- Macadamization of Main road Khanater to Tanda 50mm thick BM,25mm thick OGPC Seal Coat in Patches (Under ARD) AAA:-Superintending Engineer,PWD(R&B)Circle Poonch Order No 63 of 2025,Dated 12-12-2025
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
2
Supplying and stacking at siteGraded crushed stone aggregate of size 53 mm to 22.4 mm
3
Stone Screening of size11.2 mm nominal size (Type B)
4
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
5
Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With rapid setting bitumen emulsion.On W.B.M. /W.M.M. @ 0.4 Kg/sqm.
6
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete asper specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumenof grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
7
2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).With paving Asphalt grade VG-30 with no solvent
8
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
9
Berm dressing of Shoulder of Good earth Filling Including consolidation with heavy road roller & all carriages Complete.
10
Carriage of material by M.T incl loading/unloading & stacking complete
11
Stone agg.above 40 mm size avg. lead 18 Km by MT Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
