Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer -in-Charge at site and sorting out useful and un- useful material and transportation of the un -useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) for the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour (if required) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Centering and shuttering including strutting, propping etcetera and removal of form work for Suspended floors, roofs, landings, balconies and access plat form in including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 4 | Columns, piers, abutments, pillars, posts and struts |
| 5 | Stairs, (excluding landings) except spiral stair cases |
| 6 | Edges of slab and break in floors and walls under 20cm ( Twenty centimetre) wide. |
| 7 | Walls (any thickness) including attached pilasters, buteresses, plinth and string courses etcetera |
| 8 | Providing and laying in position cement concrete 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) mechanically mixed and vibrated of specified grade excluding the cost of centering and shuttering all work upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (M-Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 11 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (M-Thirty ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with graded stone aggregate 20 mm (twenty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 12 | Extra for shuttering in Circular work in coloumns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 13 | Extra for additional height in centring shuttering whereever required with adequate bracing propping etcincuding cost of the shuttering and decentring at all levels over a height of 3.5mm (Three point five millimetre) for every additional height of 1.00 metre (One metre) or part thereof ( Plan area to be measured ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 14 | Applying level plast minimum 10mm (Ten millimetre) thick in RCC work including rendring and making smooth surface including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 (Fifty) micron of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 (Fifty) micron of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m (One point five zero metre) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (One point six zero ± zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg(Forty kilogramme)), G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% (Five percent) tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm (One hundred sixteen into forty five millimetre) & sash 46 x 62 mm (Forty six into sixty two millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two point three ± Zero point two millimetre) and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm (One point seven five square metre) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Providing and fixing 8 mm (Eight millimetre) thick toughened glass glazing in doors, windows, ventilators shutters and partitions etcetera with angle etcetera PVC/neoprene gasket etcetera complete as per the architectural drawings and the direction of Engineer-In-Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 19 | Providing and fixing fly proof galvanized M.S. wire gauge (Horse fly make or its equivalent) designation 140G (One hundred forty G) with wire of dia 0.71mm (Zero point seven one millimetres) to windows and clerestory windows including 60x20mm beading (Sixty into twenty millimetres) rubber or screws upto all heights including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetera complete as per the architectural drawings and the directions of engineer-in-charge with float glass panes of 4 mm (four millimetre) thickness (weight not less than 10 kg/ sqm (ten kilogramme per square metre) of Modi Float, Saint Gobain, Aashai including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 21 | Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 22 | Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 23 | Providing and fixing 250x10 mm (Two hundred fifty into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 24 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 25 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 26 | Providing and fixing 100 mm (One hundred millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 27 | Finishing walls with Texured Exterior Paint of ASIAN- APEX ULTIMA of required shade on New work (Two or more coat applied @ 3.28 ltr/10 sqm (at the rate of three point two eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20kg/10sqm (at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 28 | Providing and fixing 100 mm ( one hundred milimetre ) dia Chromium Plated Grating of superior quality for floor, gully or nahani trap with hinges including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 12mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board HDMR conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera Pre-laminated particle board with decorative lamination on both sides (Action Tesa,Century Ply,Green ply,Kit ply make ) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 30 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D (Fe-Five hundred D) or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 32 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Providing and fixing 18mm (Eighteen millimetre) thick water proof commercial board Action TESA / Green Ply/ Kit Ply/ Century Ply make in Shutter for cupboard including fixing with nickel plated piano Hinges with screw etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 34 | Providing and fixing 1.00 mm ( one millimetre) thick decorative high pressure Laminated Sheet of Greenlam/ Century ply / Kit ply make plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 35 | Providing and fixing waterproof plywood 6mm ( six millimetre ) thick Action TESA / Green Ply/ Kit Ply/ Century Ply make in lining with butt jointing including mitring at junctions and nails etcetera complete ( framework for ways to be measured and paid for separately) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 36 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body with necessary accessories and screws etcetera complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 37 | Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera Twin rubber stopper complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 38 | Providing and fixing magnetic catcher triple layer of approved quality in cupboard/ ward robe shutters with necessary screws etcetera complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 39 | Providing and fixing 35 mm (Thirty five millimetre) thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws ISI marked conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st (First) class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 40 | Structural steel work riveted, bolted or welded in built up sections, (TATA/ SAIL/ Apollo/ JSW Make/ JAI BHARAT ) trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer In grating, frames, guard bar, ladder, railings, brackets, gates and similar works all complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five centimetre) ( long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.20 mm (eighty into one point twenty millimetre) M.S. laths with 1.20 mm (one point twenty millimetre) thick top cover including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing ball bearing for rolling shutters including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providing grilled rolling shutters manufactured out of 8 mm (eight millimetre) dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen into ninteen millimetre) square bar with a clear height of 85cm (Eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (Forty into six millimetre) size complete with a applying priming coat of red lead paint complete (Apollo/Jai Bharat/Tata) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all levels. Granite of any colour and shade on Area of slab over 0.50 sqm (zero point five zero square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Kota stone 25mm ( twenty five millimetre) thick slab 55x55cm (Fifty five into fifty five centimetre) size flooring over 20 mm ( twenty millimetre) average thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab in pattern finish with Makrana white second quality marble, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 47 | Kota stone slabs 20 mm ( twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs in pattern finish with Makrana white second quality marble, including rubbing and polishing complete including extra for kota stone/sand in treads of steps and risers using single length upto 1.05 ( one point zero five) metre upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 48 | Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white and matching pigment etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 49 | Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white and matching pigment etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 50 | Providing and laying HD-Series rectified Glazed Ceramic floor tiles of size 300x300mm (Three hundred into three hundred millimetre) Orient bell/ Kazaria/AGL/ Johnson & Johnson approved make or more (thickness to be specified by the manufacturer), of 1st (First) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre) thick cement mortar 1:4 (One Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetera, complete in pattern finish approved upto all floor level including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing 1st quality HD series Digital Glazed rectified ceramic glazed wall tiles (300mmx300 mm size) ( Three hundred into three hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell/ Kazaria/ Rak/Johnson and Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 52 | Providing and laying Trimix Flooring of RCC pavement mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size)including the cost of centring and shuttering and reinforcement with 8mm (Eight millimetre) dia bar @300mm C/C (Three hundred millimetre centre to centre) both ways single mesh bottom placing , The concrete shall be laid and finished with niddle vibrator then after screed board vibrator vaccum dewatering process and finally finished by sprinkeling of hardening compound nitoflor of fosguard (or equivalent) on surface evenly @ 5 kg per sqm (Five kilogramme per square metre) and fining the surface by floating, broming with wire brush etcetera The width of pavement shall be maximum 4000 mm (Four thousand millimetre) and groove of appropriate size 10 mm x 20 mm (Ten millimetre into twenty millimetre) shall be cut with machine on appropriate spacing as directed by engineer in charge and filling this grrove with approved grout/sealant with beckar rod including making good thge same and complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing Single socketed pipes 75mm ( Seventy five millimetre) dia of Supreme/Fenolax/Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing Coupler 110mm (one hundred millimetre) dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing Single pushfit Coupler 110mm (one hundred millimetre) dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing Bend 110mm (one hundred millimetre) dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | 6 mm (six millimetre) cement plaster of mix in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 60 | Distempering with 1st (First) quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre (Fifty grams per litre) of approved brand and manufacture to give an even shade New work (two or more coats) (Asian/Nerolac/ICI Dulux) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 61 | Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (Fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etcetera, by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm (Zero point four eight eight kilogramme per square metre) mixed with water proofing cement compound @ 0.253 kg/ sqm (zero point two five three kilogramme per square metre). This layer will be allowed to air cure for 4 (four) hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm (zero point two four two kilogramme per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm (zero point one two six kilogramme per square metre). This layer will be allowed to air cure for 4 (four) hours followed with water curing for 48 (forty eight) hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and laying at or near ground level factory made NTC Make kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement: three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm (Five millimetre), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) in all respects and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government. |
| 67 | Providing and laying factory made 40mm (Forty millimetre) thick cement concrete paver block of M-30 ( M-Thirty) grade with approved colour, design and pattern (NTC Make) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and installation of Expansion Joint system for Horizontal joint 150 mm (One hundred fifty millimetre) wide for heavy duty loading 25 (Twenty Five) Tonnes, with SAPS-600 (Six hundred) system of Maurer Sanfield or equivalent having 16 mm (Sixteen millimetre) MS Top plate for traffic movement, expansion compensation mechanism with spring load connection alongwith properly sealing the joint with Moisture sealing tape duly fixed with adhesives, CSK screws Hilti or equivalent etc. complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and installation of Expansion Joint system for Horizontal joint 150 mm (One hundred fifty millimetre) wide for heavy duty loading 25 (Twenty five) Tonnes, with SMSP 425X16 (Four hundred twenty five into sixteen) system of Maurer Sanfield or equivalent having 16 MM (Sixteen) MS Top plate for traffic movement, alongwith properly sealing the joint with Moisture sealing tape duly fixed with adhesives, CSK screws Hilti or equivalent etc. complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing powder coated aluminium sheet (Jindal make) in expansion joint vertically/horizontally/under soffit fixed with screws and nails complete in all floor level & in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Providing and fixing White Vitreous china Indian Type Water Closet squatting pan (Indian type W.C. pan ) of size 580x440 mm ( five hundred eighty into four hundred forty) with integral type foot rests of Hindware /Cera (Universal Pan No. 2071) with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat (Hindware/Parryware/Cera make) and lid, 10 litre (Ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) W.C. pan with ISI marked white solid plastic soft closing seat and lid , conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/ Parryware/ Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 560x415x200 mm ( Five hundred sixty into four hundred fifteen into two hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal range of two urinal basins with 5 litres ( five litre) C.I. Automatic flushing cistern basin of 430 x 260 x 350 mm ( four hundred thirty into two hundred sixty into three hundred fifty milimetre ) and 355x340x535mm (three hundred fifty five into three hundred forty into five hundred thirty five milimetre) sizes Jaquar/ Hindiware/Parryware PRS-070 make respectively with authomatic flusing cistern with fittings R.S or C.I. Brackets standard size galvansied steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, inciuding painting of cistern and fittings, cutting and making good the walls floors where required in all floor level in all heights including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Providing and fixing Division plate for urinals 600mmx300mm ( six hundred into three hundred millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing 510x1040mm (five hundred ten into one thousand forty millimetre) bowl depth 250mm (Two hundred fifty millimetre) Stainless Steel AISI 304 (18/8) Double bowl Kitchen Sink of Diamond ( DUPLEX 5220 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 80 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 81 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera complete including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | Providing and fixing CP brass toilet paper holder 1151N complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Providing and fixing 110mm(One hundred ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | Providing and fixing 75mm(Seventy five millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing 75mm(Seventy five millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing 110 mm (One hundred ten millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing 75 mm (Seventy Five millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC double equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC double equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 94 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing 15mm (fifteen millimetre) dia CP Brass Single lever telephonic wall mixer of quality and make of Jaquar (CON-CHR-273 KNUPR) (as approved by Engineer in charge) with provision of hand shower including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing 110x75mm ( One hundered ten into seventy five millimetre) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing steel towel rail of Prayag complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six millimetre) long towel rail with total length of 645 mm ( six hundred forty five millimetre), width 78 mm ( seventy eight millimetre) and effective height of 88 mm ( eighty eight millimetre), weighting not less than 190 gms (One hundred ninety gram) of Prayag/Viking heavy duty of Hindware/ Cera/ Jaquar make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Providing and fixing 1216 (16 mm ( sixteen millimetre OD) pipe Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (eighty degree Celsius) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete Concealed work, including cutting chases and making good the wall etc.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 99 | Providing and fixing 1620 (20mm ( twenty millimetre OD) pipe Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (eighty degree Celsius) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete Concealed work, including cutting chases and making good the wall etc.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing 15 mm (fifteen millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing 20 mm (twenty millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 102 | Making connection of G.I. distribution branch with G.I. main of size 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipe (TATA/JINDAL (Hissar), Tata Steel Tubes Ltd, Prakash Surya, B.S.T.) etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) d technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing 20mm (Twenty millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 105 | Providing and fixing 25mm (Twenty five millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing 15 mm (fifteen millimetre) nominal bore with 45cm (orty five centimetre) length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | Providing and fixing chromium plated brass shower rose 150mm (One hundred fifty millimetres) with 15mm (Fifteen millimetres) or 20mm (Twenty millimetres) inlet Jaquar/JAL make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 108 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty millimetre) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 109 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 110 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass bib cock of Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 111 | Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware conforming to IS standards and weighing not less than 690 gms (six hundred ninety grams) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock of Jaquar ( CON-059 KN ) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 113 | Providing and fixing CP Brass Soap Dish Holder make of Prayag having length of 138mm,( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ), height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jaquar/ CZAR/Cera make (OPAL Series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 114 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
