|
| 1 | PART A- STAFF |
| 2 | Fitters/ Line main |
| 3 | Clear water Rising main pump attendet (semi skilled) |
| 4 | Labour (un skilled) for pumping main |
| 5 | EPF 13% Contractor contribution |
| 6 | ESIC 3.25% Contractor contribution |
| 7 | PART B- MAINTENANCE OF CLEAR WATER PUMPS FOR PUMPING STATION, PUMP FOR FILLING OHT, CISTERN & BOOSTER PUMP |
| 8 | Provision for opening ,checking,transportation from site to work shop & work shop to site,repairing of pump / motor lowering and lifting of pump/motor , refitting, testing,service charge etc with cost of all material(excluding item below ) & all labour complete. of Clear water pump 740 lpm 80 mtr Head at village Bhakaly (1 no. Working + 1 no. Standby) |
| 9 | Repairing of 15 HP moter Full rewinding with changing of gland plate |
| 10 | Changing new buses |
| 11 | Changing of new gland shaft sleeve |
| 12 | Changing of new ball bearing |
| 13 | Job work for rewiring and repairing of clear water panel board at village Bhaklay (1 no. Working + 1 no. Standby) |
| 14 | Changing of complete contractor set |
| 15 | Changing of Relay unit |
| 16 | MCB 'C' Series, 240/415V, 50 Cycle, 10kA/15kA-Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-MCB FP 6A to 32A, 10kA - MCB FP 6Amp to 32Amp 10kA rating |
| 17 | LT panel accessories-Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification.Digital Ampere Metre-Digital Ampere Metre with CTs with selector switch |
| 18 | Job work for maintenance of Booster pump/pump for Cistern upto 7.5 HP total no. of pump - 2 |
| 19 | Provision for Rewindidng of submerssible Motor of any diameter i/c cost of material, labour, transportation etc. complete in case of breakdown maintenance as per approved specification and as directed by Engineer in charge. |
| 20 | Provision for repairing of starter/control panel i/c cost of material, labour, transportation, testing etc complete. |
| 21 | PART B- MAINTENANCE OF 250mm dia 200 MM DIA D.I. , 110/90 MM PVC PIPE, 110 MM DIA HDPE PIPE & CISTERN |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. All kind of soil (6 Cum x7nos = 42) |
| 23 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. In ordinary or Soft rock with or without blasting or bituminous pavement / cement concrete road. (4.8 Cum x7nos = 33.6) |
| 24 | Filling available excavated earth in trenches, lead up to 50m and lift up to 1.5m in all kind of soil excludingwatering and ramming. |
| 25 | Dismantling of Cement Concrete Pavment by mechanical means using pneumatic tools, cutter breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 26 | Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 40mm nominal sizegraded stone aggregate) 1:2:4 (M-15)(15.08x0.1) |
| 27 | Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering. 1:11/2:3 (M-20 ) |
| 28 | Labour for laying in position including testing socket & spigot Ductile Iron (K-9) pressure pipes 250 mm dia(Pipe supplied by dept.10 No x 10.00 mtr = 100.00 mtr |
| 29 | 250 mm dia |
| 30 | 200 mm dia |
| 31 | 150mm dia |
| 32 | Labour only for cutting following Ductile Iron pipes of any type and class.250mm & 200 mm dia 15x2 cut = 30 cut |
| 33 | 250 mm dia |
| 34 | 200 mm dia |
| 35 | 150 mm dia |
| 36 | Providing Rubber ISI marked Gasket (push on) joint as per IS-5382/85 to following DI pipes class K-7 and K-9 including testing of joints and cost of jointing materials (Rubber Gasket and soap solution etc.) |
| 37 | 250 mm dia |
| 38 | 200 mm dia |
| 39 | 150 mm dia |
| 40 | 100 mm dia |
| 41 | Providing and Laying including testing ductile iron PN 16 type specials such as flanged socket, flanged spigot, double socket bends,tees etc conforming to IS9523/2000 having dimension as per table 23 of IS9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000 complete. for |
| 42 | 200 mm dia |
| 43 | 250 mm dia |
| 44 | Providing, laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as hight DensityPolyethylene pipes, PE 100) conforming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) |
| 45 | 90 mm dia 6 kg/cm2 |
| 46 | 110 mm dia 6 kg/cm2 |
| 47 | Providing, laying and jointing following P.V.C. pipes with solvent cement joint for 6, 8 and 10 kg/ sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect. |
| 48 | 110 mm dia 10 kg/sq.cm |
| 49 | 90 mm dia 10 kg/sq.cm |
| 50 | Providing and layingin position including testing of following PVC specials such as coupler, tee, D- joint, flanged tail pieces , Reducer, End cap etc suitable for 10 Kg/sq.cm pressure pipe . |
| 51 | 110 mm dia 10 kg/sq.cm |
| 52 | 90 mm dia 10 kg/sq.cm |
| 53 | Providing and laying and fixing in position including testing following PVC bends suitable for 10 Kg/Sq. cm. pressure pipes. |
| 54 | 110 mm dia 10 kg/sq.cm |
| 55 | 90 mm dia 10 kg/sq.cm |
| 56 | Providing solvent cement joints to PVC pipes and fittings of 6, 8 and 10Kg /Sq cm. Pressure(IF PIPES AND FITTING SUPLLIED BY DEPT) including testing of joints but including cost of jointing materials (i.e. coupler and solvent cement) Two joint for each specials |
| 57 | 110 mm dia 10 kg/sq.cm |
| 58 | 90 mm dia 10 kg/sq.cm |
| 59 | Provision for Repairing of old existing CI Sluice Valve i/c repairing of spindle, check nut, changing of gland, lathe work as per requirement, changing of nut bolt, rubber sheet etc. complete as per approved specification and as directed by Engineer in charge. |
| 60 | Provision for leakage repairing of cisterns including providing & fixing water taps and required GI fittings complete.Total no. of cistern 49 nos |
| 61 | Provision for Inter connection of old to new pipe line with excavation of trench as per requirement /repairing of leakage of pipe line of Any diameter & any type of pipe line in muddy area i/c searching of leakage point, dewatering the trench repairing the leakage, laying & jointing of pipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D-joints, couplers, suitable UPVC pipe solvent cement etc. complete job work.as per approved specification and as directed by engineer incharge .USOR. Item.no.17.17 chapter no. 17 |
| 62 | 90 mm dia |
| 63 | 110 mm dia |
| 64 | Provision for inter connection ofold to new pipe line with excavation of trench as per requirement/ repairing of leakage of pipe line of any diameter & typeof pipe line in muddy area i/c searching of leakage point, dewatering the trench, repairing the leakage laying & jointing ofpipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D-joints couplers, solvent cement etc. complete Job work as per approved specification and as directed by Engineer in charge. |
| 65 | 90mm dia |
| 66 | 110mm dia Please Enable Macros to View BoQ information |
