|
| 1 | Supplying, installation, testing & commissioning of Firepower 8 x RJ45, 8 x 1/10G SFP+ ports Throughput: with 10G SFP+ firepower(FW) TLS1 3.2 Gbps + Application Visibility and Control (AVC) upto 10Gpbs,Throughput: FW+AVC+IP 10 Gbps Intrusion Prevention System (IPS) (10G) 1gpbs,Maximum concurrent sessions, with AVC 100K,Maximum new connections per second, with AVC 6K,Transport Layer Security (TLS)3.2Gbbps,Throughput: NGIPS (1024B) 10 Gbps,IPSec VPN throughput (5.5 gbps TCP w/Fastpath),Maximum VPN Peers 2,000 Cisco Device Manager (local management) YES,Centralized management Centralized configuration, logging, monitoring, and reporting are performed by the Threat Defense Manager (FMC) or, alternatively, from the cloud with Cisco Defense Orchestrator,AVC Standard, supporting more than 4000 applications, as well as geolocations, users, and websites,AVC: OpenAppID support for custom, open-source application detectors Standard,Cisco Security Intelligence Standard, with IP, URL, and DNS threat intelligence,Cisco Malware Defense for Networks Available; enables detection, blocking, tracking, analysis, and containment of targeted and persistent malware, addressing the attack continuum both during and after attacks. Integrated threat correlation with Cisco AMP for Endpoints is also optionally available,URL filtering: number of categories More than 80,Stateful inspection firepowerthroughput1 2GBPS,Stateful inspection firepowerthroughput (multiprotocol)2 1.4 Gbps,Concurrent firepowerconnections 100000,New connections per second 25000,IPsec VPN throughput (450B UDP L2L test) 500Mbps,Maximum VPN Peers 75,High availability Active/standby,Scalability VPN Load Balancing,Network interfaces 8 x 1000BASE-T,Management interfaces 1 x 1000BASE-T 1x Serial console (RJ-45),USB 1 x USB 3.0 Type-A (500mA),Storage 1 x 200 GB,AC input voltage 100 to 240V AC,AC maximum current draw < 2A at 100V, < 1A at 240V,AC maximum power draw115W,Temperature: operating 32 to 104°F (0 to 40°C),Temperature: nonoperating -13 to 158°F (-25 to 70°C),Altitude: nonoperating 15,000 ft (max) with required existing system configuration etc as required. |
| 2 | Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. i) 10 G SFP Multi Mode |
| 3 | Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 μm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required. |
| 4 | Supplying, Installation Testing and Commissioning of Managed 24 port L3 POE+ switch compatible for 19\\" rack mountable 1U having minimum 2GB RAM and 1 GB Flash memory, through put of minimum 90 NPPS, with retardant hot swappable power supply, modules/SFP, fan tray and should support MAC address 16000, stacking with dedicated stacking/MLAG ports of 80 GBPS stacking bandwidth, stack minimum 4 switches, Minimum 4 number of uplink interface , PoE+. PoE Power Output Capability 30W per port simultaneously, Minimum 48 x 1000Base-T (from Day 1), 4 x 1G/10G Uplink Interfaces. Should be loaded with 2X10Gbps MM SFPs from Day 1, should support protocol support SVIs (inter VLAN Routing), Static routing, OSPF, PIM, IEEE Standards 802.1d, 802.1s, 802.1w, 802.3ad, 802.3x, 802.1p, 802.1q, 802.3, 802.3u, 802.3ab, 802.3z, 802.3ae, 802.3 , minimum 500 IPV4 routes, 500 IPV6 routes with IPv6 ready logo, 802.1x authentication and accounting, IPv4 and IPv6 ACLs, Dynamic VLAN assignment, IP Source Guard, 802.1x, DHCP Option 82 or equivalent, Dynamic ARP Inspection (DAI), MAC Limiting, Sticky MAC or equivalent, Proxy ARP, IPv6 Security IPv6 RA Guard, IPv6 DHCP Guard/DHCP Snooping, IPv6 Neighbor Discovery Inspection and IPv6 Source Guard, Access List/ Firewall Filters, QoS, IPv6, SSHv2, SNMPv2c, SNMPv3, NTP, RADIUS and TACACS+, Jumbo frame, Telemetry & Visibility using Netflow /jflow/sflow, SPAN, RSPAN, management functionality using open APIs/ NETCONF/RESTCONF using https/ YANG/ XML data models for external tools to automatically provision network resources/configuration or through https, switch should be EAL3/ NDPP/ NDcPP certified under Common Criteria OR should satisfy the TEC -ER /IR/GR standard complete with 1 Years Guarantee and software/firmware support etc complete as required. |
| 5 | Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0. 8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1. 6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. a) 6U |
| 6 | Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. a) 12Port LIU |
| 7 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 μm and 125 ± 0.7 μm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cutoff wavelength < 1260 nm i/c splicing & marking etc complete as required. a) Single Mode 6 Core Optical fiber cable |
| 8 | Supplying, Installation, Testing and commissioning of CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. a) Copper Patch Cords of length 1m (3ft) |
| 9 | b) Copper Patch Cords of length 3m (10ft) Please Enable Macros to View BoQ information |
