Tender For Construction Of 1.5 Km, 33Kv Line To Elamkulam Ss Using Xlpe Ccsx 120Sqmm Aaac Cc, Except Stringing, Malappuram-Kerala

TDR : 55399601

Tender Notice
BOQ

6 Days Left

Malappuram , Kerala

Tender Brief : Tender For Construction Of 1.5 Km, 33Kv Line To Elamkulam Ss Using Xlpe Ccsx 120Sqmm Aaac Cc, Except Stringing

Document Fees
₹ 5180 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 21.94 Lakhs /-

Submission Date
21-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	DSR_2.33.1 - 2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth (cost index(c) : 1.3268 included in Rate)
2	DSR_2.33.2 - 2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth (cost index(c) : 1.3268 included in Rate)
3	DSR_2.33.3 - 2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth (cost index(c) : 1.3268 included in Rate)
4	DSR_2.33.4 - 2.33.4 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth (cost index(c) : 1.3268 included in Rate)
5	DSR_2.32 - 2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (cost index(c) : 1.3268 included in Rate)
6	656 - Clearing touchings on 33kV lines, cutting branches of trees, bamboo clusters, coconut cudjans etc. from above the lines for a distance of 2.0m from the outer conductor as specified by dept. (Rural/Remote).
7	TRLC_01.27.18 - Bailing out water with engine and pump set including conveyance to site and erection cost of fuel, lubricating oil and other stores, pay of staff etc.complete (cost index(e) : 1.2062 included in Rate)
8	TRLC_01.27.19 - Dewatering Manual (cost index(e) : 1.2062 included in Rate)
9	TRLC_01.27.15 - Construction of earthern ring bunds for bailing out water for excavation for foundation and stub setting, including shoring, if necessary, with plaited coconut cadjan and bamboos, etc. For Bunds upto 0.5 m height, 1 m bottom width and 0.5 m top width (cost index(e) : 1.2062 included in Rate)
10	DSR_2.18.1 - 2.18.1 : Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete ( Measurements to be taken of the face area timbered):Depth not exceeding 1.5 m (cost index(c) : 1.3268 included in Rate)
11	DSR_2.18.2 - 2.18.2 : Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete ( Measurements to be taken of the face area timbered):Depth exceeding 1.5 m but exceeding 3 m (cost index(c) : 1.3268 included in Rate)
12	703 - Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
13	726 - Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
14	727 - Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 numbers of poles. (Running km)
15	105 - Loading HT A type pole of all sizes to Hand cart from the stacking place and unloading the same at work site (excluding transportation).
16	106 - Transporting A type pole of all sizes by Hand cart - normally limited to 4km (excluding loading and unloading).
17	110 - Transporting A type pole of all sizes by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
18	111 - Transporting Four legged lattice structure of all sizes by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
19	701 - Labour charges for loading HT TW/RSJ/Rail pole from the stacking place and unloading the same at work site (transportation by any vehicle).
20	702 - Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
21	103 - Loading HT PSC pole to Hand cart from the stacking place and unloading the same at work site (excluding transportation).
22	104 - Transporting one HT PSC pole by Hand cart - normally limited to 4km (excluding loading and unloading).
23	109 - Transporting one HT PSC pole by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
24	TRLC_01.28.12 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Line and Earth Conductor (cost index(e) : 1.2062 included in Rate)
25	TRLC_01.28.13 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof above 10km, for Line and Earth Conductor (cost index(e) : 1.2062 included in Rate)
26	TRLC_01.28.19 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Insulators and accessories, power conductor accessories and earth conductor accessories etc (cost index(e) : 1.2062 included in Rate)
27	TRLC_01.28.20 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part there of over 10km, for Insulators and accessories, power conductor accessories and earth conductor accessories etc (cost index(e) : 1.2062 included in Rate)
28	TRLC_01.28.26 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Tower extensions and other structures and all other materials including earthing materials (cost index(e) : 1.2062 included in Rate)
29	TRLC_01.28.27 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof over 10km for Tower extensions and other structures and all other materials including earthing materials (cost index(e) : 1.2062 included in Rate)
30	DSR_2.8.1 - 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil (cost index(c) : 1.3268 included in Rate)
31	DSR_2.9.1 - 2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock (cost index(c) : 1.3268 included in Rate)
32	DSR_2.9.3 - 2.9.3 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited) (cost index(c) : 1.3268 included in Rate)
33	DSR_2.26.1 - 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil (cost index(c) : 1.3268 included in Rate)
34	DSR_2.26.2 - 2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock (cost index(c) : 1.3268 included in Rate)
35	C-202526-3999-6 - Stub setting in lines and levels using template in concrete foundation for 14 m A, B, C type lattice towers, etc as per specification and as directed by the departmental staff at site.
36	DSR_4.1.5 - 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (cost index(c) : 1.3268 included in Rate)
37	DSR_5.9.1 - 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete (cost index(c) : 1.3268 included in Rate)
38	DSR_5.1.2 - 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size (cost index(c) : 1.3268 included in Rate)
39	DSR_5.22.6 - 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more (cost index(c) : 1.3268 included in Rate)
40	160 - Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.
41	161 - Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.
42	162 - Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock.
43	C-202526-3999-9 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Ordinary Soil
44	C-202526-3999-10 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Hard Soil/ Laterite
45	C-202526-3999-11 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Hard Laterite
46	C-202526-3999-12 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Soft Rock
47	DSR_2.25 - 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (cost index(c) : 1.3268 included in Rate)
48	C-202526-3999-7 - Erection of tower superstructures above the ground level, including erection of normal and special hillside members, wherever necessary, providing insulators, cross arms tower accessories etc for 14m A, B, C type lattice towers, 14 m A poles, etc, as per approved drawing and direction of the departmental staff at site.
49	C-202526-3999-8 - Fitting and erecting 1 No. double pole using 14/12m 'A' type poles in line and level, including fixing of angles to connect the two poles by using clamps, bolts & nuts and earthing etc. but excluding cost of materials.
50	157 - Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
51	C-202526-3999-13 - Fitting and providing 1 No. Stay as per the drawings & direction, using tools and tackles, including backfilling but excluding excavation.
52	C-202526-3999-14 - Providing temporary stay during the line stringing work wherever found necessary and as directed.
53	135 - Stringing of one km 11kV line with ACSR Raccoon (3 conductors) after fitting insulators and giving jumper connections including cutting and removing tree branches wherever necessary excluding cut point works.
54	333 - Re-Tensioning one span 11kV line including replacing pin insulators, pin binding, jumpering, replacing insulators cross arms disc, tightening stay, cutting tree branches etc. wherever necessary, including conveyance of all materials complete.
55	214 - Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and ACSR Weasel for Neutral, for one km LT three phase 4 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
56	412 - Reshackling one span LT three phase 4 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
57	411 - Reshackling one span LT single phase 2 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
58	419 - Transferring LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
59	221 - Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
60	417 - Providing/Inserting 2 line spacer on the existing LT OH line.
61	418 - Providing/Inserting 3 line spacer on the existing LT OH line.
62	TRS.01.021 - Erection of one set 33KV Bus Isolator on the already erected structure including opening crates and conveyance of all accessories from the place of storage to the place of erection to lines and levels including erection of mechanism box checking operation and aligning properly as per the direction of departmental officers. (cost index(e) : 1.2062 included in Rate)
63	TRS.01.009 - Erection of 1 No. 33KV LA/Post insulator on the already erected structure after opening of crates at the place of storage leading to site carefully, keeping lines and levels as per the direction of the departmental officers. (cost index(e) : 1.2062 included in Rate)
64	169 - Fitting one Additional V cross arm in existing single pole including conveyance of materials.
65	179 - Additional rate for providing one HT Pin with insulator, complete on any type of HT pole.
66	171 - Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
67	170 - Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
68	174 - Fitting one LT 2 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
69	175 - Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
70	363 - Drilling hole of various sizes on existing Channel/Cross Arm.
71	TRLC_01.16.02 - Filing of holes (cost index(e) : 1.2062 included in Rate)
72	365 - Cutting Channel/Cross Arm/Angle Iron into two pieces.
73	TRS.01.151 - Welding charge for welding on iron parts using arc welding as per standards (cost index(e) : 1.2062 included in Rate)
74	776 - Pole numbering using printed Aluminium sheets of 22 SWG having size 20 x 12 cm or Painting the surface of line supports where numbers are to be inscribed, Pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The number and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5cm in width. including cost of paint.
75	451 - Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
76	452 - Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
77	610 - Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.
78	566 - Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
79	513 - Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
80	568 - Dismantling one section fuse from structure and bringing back to section store.
81	514 - Dismantling (without damage) one HT stay including digging pit in all classes of soil and backfilling, and bringing back to section store.
82	516 - Dismantling (without damage) one Channel cross arm from existing DP structure and bringing back to section store.
83	515 - Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store.
84	560 - Dismantling one LT 2 line cross arm with clamp from existing pole and stacking.
85	561 - Dismantling one LT 4 line cross arm with clamp from existing pole and stacking.
86	517 - Dismantling (without damage) one AB switch from existing structure and bringing back to section store.
87	503 - Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
88	504 - Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
89	501 - Dismantling one damaged 11kV TW/RSJ/Rail pole after disconnecting stays, strut etc. attached thereon and stacking the same. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Transmission Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 1.5 Km, 33Kv Line To Elamkulam Ss Using Xlpe Ccsx 120Sqmm Aaac Cc, Except Stringing, Malappuram-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	DSR_2.33.1 - 2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth (cost index(c) : 1.3268 included in Rate)
2	DSR_2.33.2 - 2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth (cost index(c) : 1.3268 included in Rate)
3	DSR_2.33.3 - 2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth (cost index(c) : 1.3268 included in Rate)
4	DSR_2.33.4 - 2.33.4 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth (cost index(c) : 1.3268 included in Rate)
5	DSR_2.32 - 2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (cost index(c) : 1.3268 included in Rate)
6	656 - Clearing touchings on 33kV lines, cutting branches of trees, bamboo clusters, coconut cudjans etc. from above the lines for a distance of 2.0m from the outer conductor as specified by dept. (Rural/Remote).
7	TRLC_01.27.18 - Bailing out water with engine and pump set including conveyance to site and erection cost of fuel, lubricating oil and other stores, pay of staff etc.complete (cost index(e) : 1.2062 included in Rate)
8	TRLC_01.27.19 - Dewatering Manual (cost index(e) : 1.2062 included in Rate)
9	TRLC_01.27.15 - Construction of earthern ring bunds for bailing out water for excavation for foundation and stub setting, including shoring, if necessary, with plaited coconut cadjan and bamboos, etc. For Bunds upto 0.5 m height, 1 m bottom width and 0.5 m top width (cost index(e) : 1.2062 included in Rate)
10	DSR_2.18.1 - 2.18.1 : Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete ( Measurements to be taken of the face area timbered):Depth not exceeding 1.5 m (cost index(c) : 1.3268 included in Rate)
11	DSR_2.18.2 - 2.18.2 : Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete ( Measurements to be taken of the face area timbered):Depth exceeding 1.5 m but exceeding 3 m (cost index(c) : 1.3268 included in Rate)
12	703 - Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
13	726 - Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
14	727 - Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 numbers of poles. (Running km)
15	105 - Loading HT A type pole of all sizes to Hand cart from the stacking place and unloading the same at work site (excluding transportation).
16	106 - Transporting A type pole of all sizes by Hand cart - normally limited to 4km (excluding loading and unloading).
17	110 - Transporting A type pole of all sizes by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
18	111 - Transporting Four legged lattice structure of all sizes by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
19	701 - Labour charges for loading HT TW/RSJ/Rail pole from the stacking place and unloading the same at work site (transportation by any vehicle).
20	702 - Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
21	103 - Loading HT PSC pole to Hand cart from the stacking place and unloading the same at work site (excluding transportation).
22	104 - Transporting one HT PSC pole by Hand cart - normally limited to 4km (excluding loading and unloading).
23	109 - Transporting one HT PSC pole by Head load- for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).
24	TRLC_01.28.12 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Line and Earth Conductor (cost index(e) : 1.2062 included in Rate)
25	TRLC_01.28.13 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof above 10km, for Line and Earth Conductor (cost index(e) : 1.2062 included in Rate)
26	TRLC_01.28.19 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Insulators and accessories, power conductor accessories and earth conductor accessories etc (cost index(e) : 1.2062 included in Rate)
27	TRLC_01.28.20 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part there of over 10km, for Insulators and accessories, power conductor accessories and earth conductor accessories etc (cost index(e) : 1.2062 included in Rate)
28	TRLC_01.28.26 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50 m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Tower extensions and other structures and all other materials including earthing materials (cost index(e) : 1.2062 included in Rate)
29	TRLC_01.28.27 - Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof over 10km for Tower extensions and other structures and all other materials including earthing materials (cost index(e) : 1.2062 included in Rate)
30	DSR_2.8.1 - 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil (cost index(c) : 1.3268 included in Rate)
31	DSR_2.9.1 - 2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock (cost index(c) : 1.3268 included in Rate)
32	DSR_2.9.3 - 2.9.3 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited) (cost index(c) : 1.3268 included in Rate)
33	DSR_2.26.1 - 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil (cost index(c) : 1.3268 included in Rate)
34	DSR_2.26.2 - 2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock (cost index(c) : 1.3268 included in Rate)
35	C-202526-3999-6 - Stub setting in lines and levels using template in concrete foundation for 14 m A, B, C type lattice towers, etc as per specification and as directed by the departmental staff at site.
36	DSR_4.1.5 - 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (cost index(c) : 1.3268 included in Rate)
37	DSR_5.9.1 - 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete (cost index(c) : 1.3268 included in Rate)
38	DSR_5.1.2 - 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size (cost index(c) : 1.3268 included in Rate)
39	DSR_5.22.6 - 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more (cost index(c) : 1.3268 included in Rate)
40	160 - Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.
41	161 - Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.
42	162 - Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock.
43	C-202526-3999-9 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Ordinary Soil
44	C-202526-3999-10 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Hard Soil/ Laterite
45	C-202526-3999-11 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Hard Laterite
46	C-202526-3999-12 - Digging one stay/ earth pits as per directions including breaking clods, watering, ramming and sectioning of soil bank etc., complete. - Soft Rock
47	DSR_2.25 - 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. (cost index(c) : 1.3268 included in Rate)
48	C-202526-3999-7 - Erection of tower superstructures above the ground level, including erection of normal and special hillside members, wherever necessary, providing insulators, cross arms tower accessories etc for 14m A, B, C type lattice towers, 14 m A poles, etc, as per approved drawing and direction of the departmental staff at site.
49	C-202526-3999-8 - Fitting and erecting 1 No. double pole using 14/12m 'A' type poles in line and level, including fixing of angles to connect the two poles by using clamps, bolts & nuts and earthing etc. but excluding cost of materials.
50	157 - Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
51	C-202526-3999-13 - Fitting and providing 1 No. Stay as per the drawings & direction, using tools and tackles, including backfilling but excluding excavation.
52	C-202526-3999-14 - Providing temporary stay during the line stringing work wherever found necessary and as directed.
53	135 - Stringing of one km 11kV line with ACSR Raccoon (3 conductors) after fitting insulators and giving jumper connections including cutting and removing tree branches wherever necessary excluding cut point works.
54	333 - Re-Tensioning one span 11kV line including replacing pin insulators, pin binding, jumpering, replacing insulators cross arms disc, tightening stay, cutting tree branches etc. wherever necessary, including conveyance of all materials complete.
55	214 - Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and ACSR Weasel for Neutral, for one km LT three phase 4 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
56	412 - Reshackling one span LT three phase 4 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
57	411 - Reshackling one span LT single phase 2 wire OH line including pin binding, jumpering, replacing insulators/cross arms/shackle, tightening stay, cutting tree branches etc. wherever necessary including conveyance of all materials.
58	419 - Transferring LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
59	221 - Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
60	417 - Providing/Inserting 2 line spacer on the existing LT OH line.
61	418 - Providing/Inserting 3 line spacer on the existing LT OH line.
62	TRS.01.021 - Erection of one set 33KV Bus Isolator on the already erected structure including opening crates and conveyance of all accessories from the place of storage to the place of erection to lines and levels including erection of mechanism box checking operation and aligning properly as per the direction of departmental officers. (cost index(e) : 1.2062 included in Rate)
63	TRS.01.009 - Erection of 1 No. 33KV LA/Post insulator on the already erected structure after opening of crates at the place of storage leading to site carefully, keeping lines and levels as per the direction of the departmental officers. (cost index(e) : 1.2062 included in Rate)
64	169 - Fitting one Additional V cross arm in existing single pole including conveyance of materials.
65	179 - Additional rate for providing one HT Pin with insulator, complete on any type of HT pole.
66	171 - Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
67	170 - Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
68	174 - Fitting one LT 2 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
69	175 - Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line.
70	363 - Drilling hole of various sizes on existing Channel/Cross Arm.
71	TRLC_01.16.02 - Filing of holes (cost index(e) : 1.2062 included in Rate)
72	365 - Cutting Channel/Cross Arm/Angle Iron into two pieces.
73	TRS.01.151 - Welding charge for welding on iron parts using arc welding as per standards (cost index(e) : 1.2062 included in Rate)
74	776 - Pole numbering using printed Aluminium sheets of 22 SWG having size 20 x 12 cm or Painting the surface of line supports where numbers are to be inscribed, Pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The number and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5cm in width. including cost of paint.
75	451 - Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
76	452 - Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
77	610 - Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.
78	566 - Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
79	513 - Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
80	568 - Dismantling one section fuse from structure and bringing back to section store.
81	514 - Dismantling (without damage) one HT stay including digging pit in all classes of soil and backfilling, and bringing back to section store.
82	516 - Dismantling (without damage) one Channel cross arm from existing DP structure and bringing back to section store.
83	515 - Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store.
84	560 - Dismantling one LT 2 line cross arm with clamp from existing pole and stacking.
85	561 - Dismantling one LT 4 line cross arm with clamp from existing pole and stacking.
86	517 - Dismantling (without damage) one AB switch from existing structure and bringing back to section store.
87	503 - Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
88	504 - Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
89	501 - Dismantling one damaged 11kV TW/RSJ/Rail pole after disconnecting stays, strut etc. attached thereon and stacking the same. Please Enable Macros to View BoQ information

Tender For Construction Of 1.5 Km, 33Kv Line To Elamkulam Ss Using Xlpe Ccsx 120Sqmm Aaac Cc, Except Stringing, Malappuram-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us