|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock |
| 2 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : Water bound macadam road |
| 3 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : Bituminous road |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 12 mm Cement Plaster |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement: 5 Coarse sand (zone-III) :10 graded stone aggregate 20mm nominal size). |
| 8 | Repair and overhauling of 32HP Auto prime pump set and replacement of defective parts:- Filter kit Engine oil, fuel pipe, Synthetic jelly Cleaning waste, Carry Bag, Hylam Blade 4no., 8\\" priming float plate assembly 1no. 6\\" Rubber floating Ball 1no, gasket PE/CE bearing cover 2nos, gasket (vaccum pump body), coupling set 1 no. coupling Belt 2nos, pressure oil 10ltr., Labour charges for dismentling and fixing the spair parts, testing etc. as per the direction of Engineer-in-charge. |
| 9 | Repair and overhauling of 28HP Diesel Engine and replacement of defective parts pump nozzel 1no, Oil filter 1no. Diesel filter 1no, engine oil 7 litr, self repair 1no. Labour charges for dismantling and ressembling the engined and minor lath work, testing etc. as per the direction of Engineer-in-charge. |
| 10 | Repair of 28HP Diesel Engine and replacement of defective parts rediator 1no, Diesel pump Nozzel 1no., ring set 1no. Ciston 1no, Head gasket set 1no., Oil filter 1no., Diesel filter 1no., engine oil, Engine head, lath work, labour charges for dismantling and reassembling testing etc. as per the direction of Engineer-in-charge. |
| 11 | Providing engine oil replacing, Coolent filling, rediator serviceing, check nuts, bolts, replace of wornout parts and wiring etc. for srvicing of 320KVA DG set all complete as per satisfaction of Engineer-in-charge. |
| 12 | Rewinding of drainage dewatering sewerage/ submersible pump set of 40KW/50 HP 3 phase 415 volt AC supply drainage dewatering submersible pump set of Modi/KSB/SU or equivalent or appropriate quality with 10 metre cable, 5 metre chain and discharge elbow with working condition. Liquid storm water capacity 7000 LPM. total head 10metre, top speed 2900 rpm motor output 50 HP/40 KW, supply voltage phase , 50 HZ 400+8% Volts and method of starting S/D and required size of cable 4 core 10mm 2+2core +1 mm2 with discharge bend 200mm size and specified gravity 1.05, Max Temp 40o and protections enclosure IP 68 with making pump casing NIC 2% impeller CF8M, shaft SS 410, Body CI and as per direction and satisfaction of Engineer-in-charge. |
| 13 | Installation and dismantling of 40KW/50HP 3 phase 415 volt AC supply drainage dewatering /sewerage submerssible pump set of Modi/KSB/SU or equivalent or appropriate quality with 10 metre cable, 5 metre chain and discharge elbow by means of dismantling of old installation completely by the help of tool and plant including welding set, removing of old pump set of various makes and capacity from the required depth of sump well dismanting of old CI & GI pipe fittings like bend, elbow, flanges and old pipe of different sizes, dismantling of old electrical panel board of different capacity inculding removing of power cables and installation of the new electrical pannel including electrical installation commissioning etc. in the sump well under Africa Avenue under bridge up to the entire satisfaction of Engineer-in-charge. |
| 14 | Repair of 50HP non cloge sewage submerssible pump set rewinding kit O Ring set mechanical seal upper, mechanical seal lower ball bearing upper type and ball bearing lower type oil etc. as per the direction of Engineer-in-charge. |
| 15 | Repair of 25HP non cloge sewage submerssible pump set rewinding kit O Ring set mechanical seal upper, mechanical seal lower ball bearing upper type and ball bearing lower type oil etc. as per the direction of Engineer-in-charge. |
| 16 | Servicing and over hauling of 8 hp diesel engine operated pump sets mounted on trolley including providing and fixing necessary spare parts like Engine Oil, Packing Kit Gear Oil, pressure pipe air, oil filter silencer servicing and minor repairs of 8 HP Diesel Engine Pump set complete in all respect as per direction of Engineer-in-charge. |
| 17 | Servicing and over hauling of 6 hp diesel engine operated pump sets mounted on trolley including providing and fixing necessary spare parts like Engine Oil, Packing Kit Gear Oil, pressure pipe air, oil filter silencer servicing and minor repairs of 6 HP Diesel Engine Pump set complete in all respect as per direction of Engineer-in-charge. |
| 18 | Servicing and over hauling of 5 hp diesel engine operated pump sets mounted on trolley including providing and fixing necessary spare parts like Engine Oil, Packing Kit Gear Oil, pressure pipe air, oil filter silencer servicing and minor repairs of 5 HP Diesel Engine Pump set complete in all respect as per direction of Engineer-in-charge. |
| 19 | Servicing and over hauling of 3.5 hp Petrol engine operated pump sets mounted on trolley including providing and fixing necessary spare parts like Engine Oil, Packing Kit Gear Oil, pressure pipe air, oil filter silencer servicing and minor repairs of 3.50 HP Petrol Engine Pump set complete in all respect as per direction of Engineer-in-charge. |
| 20 | Servicing and over hauling of 3 hp diesel engine operated pump sets mounted on trolley including providing and fixing necessary spare parts like Engine Oil, Packing Kit Gear Oil, pressure pipe air, oil filter silencer servicing and minor repairs of 3 HP Diesel Engine Pump set complete in all respect as per direction of Engineer-in-charge. |
| 21 | Rewinding of electric sewerage/dewatering pump of 3.00 HP Three phase with all accessories like bearing, condenser etc. as per satisfaction of Engineer-in-Charge. |
| 22 | Rewinding of electric sewerage/dewatering pump of 1.50 HP single phase with all accessories like bearing, condenser etc. as per satisfaction of Engineer-in-Charge. |
| 23 | Rewinding of electric sewerage/dewatering pump of 1.00 HP single phase with all accessories like bearing, condenser etc. as per satisfaction of Engineer-in-Charge. |
| 24 | Providing and fixing testing and comissioning of 200mm moninal dia 6mm thick M.S pipe as per IS: 3589:2001 complete with the welding and anticorossive bitumastic paint outside including necessary cutting & welding of M.S bend M.S flange and M.S Clamps etc. as per direction and entire satisfaction of engineer in charge. |
| 25 | Providing and fixing overload relay L&T BCH make for star delta fully automatic starter including labour cartage etc. as per the direction of Engineer-in charge overload relay 30-50Amp |
| 26 | Providing and fixing overload relay L&T BCH make for star delta fully automatic starter including labour cartage etc. as per the direction of Engineer-in charge overload relay 45-75Amp |
| 27 | Providing and fixing MCCB type DN2-100D thermal release range 100-125, 3 pole to regulate the main supply to panel board complete as per direction of engineer-in charge. |
| 28 | Providing and fixing 3 pole power contractor MNX type 40 AMP as per direction of engineer-in charge. |
| 29 | Providing and fixing 3 pole power contractor MNX type 70 AMP as per direction of engineer-in charge. |
| 30 | Providing and placing single phase preventer suitable for direct online star delta starter of make jetson Technology L&T minileck or equivalent including making connection to existing starter panel etc. complete as per the direction and entire satisfaction of Engineer in charge Please Enable Macros to View BoQ information |
