|
| 1 | 1) Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 2 | a) Two coats. |
| 3 | 2) Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 4 | a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 5 | 3) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 6 | a) One or more coats on old work. |
| 7 | 4) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : |
| 8 | a) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. |
| 9 | 5) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 10 | 6) Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 11 | a) 35 mm thick shutters. i) with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood |
| 12 | 7) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 13 | a) for windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with ladder arrangement wherever necssary. |
| 14 | b) for windows in upper floors ( other than ground floor ) up to 8 floors with necessary Jhoola arrangement |
| 15 | 8) Providing and fixing sanitary fittings/appliances by removing the existing damaged sanitary and water supply fittings and replacing them with these new fittings including necessary white lead/ lead wool etc complete as directed by the engineer in charge. |
| 16 | a) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 17 | b) Uplasticised PVC connection pipe 15 mm nominal bore and 45 cm length with brass unions : |
| 18 | c) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 32 mm dia |
| 19 | d) PTMT pillar cock 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour . |
| 20 | e) PTMT stop cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 21 | f) PTMT Bib cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 22 | 9) Charges for minor Repairs to wooden panelled/flush doors / window setc., . Cost includes all labour for attending minor repairs like sides planing for proper functioning and refixing screws after attending necessary repairs etc., with necessary screws, nails etc., complete (Cost of wood will be paid separately,but i/c required screws ) |
| 23 | a) Wooden door / window/Cupboards |
| 24 | 10) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 25 | a)With cement mortar 1:4 (1 cement : 4 fine sand). Please Enable Macros to View BoQ information |
