|
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil |
| 3 | pipes ,cable etc,not exceeding 80mm dia |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 13 | Profile B |
| 14 | Fixing with adjustable lugs split end tail to each jamp |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 16 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 17 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 18 | Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 19 | 12 mm cement plaster of mix |
| 20 | 1:4 (1 cement: 4 coarse sand) |
| 21 | 6 mm cement plaster of mix : |
| 22 | 1:3 (1 cement : 3 fine sand) |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 25 | Old work (one or more coats) |
| 26 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete |
| 27 | Renewing glass panes, with wooden fillets wherever necessary: |
| 28 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 29 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge |
| 30 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 31 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 32 | Of area 3 sq. metres and below |
| 33 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 34 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 35 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 36 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 37 | Kitchen sink without drain board |
| 38 | 610x510 mm bowl depth 200 mm |
| 39 | Providing and fixing white vitreous china water closet squatting pan (Indian type) |
| 40 | Orissa pattern W.C. pan of size 580x440 mm |
| 41 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 42 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 43 | 10 litre (full flush) capacity-white |
| 44 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 45 | Semi rigid pipe |
| 46 | 32 mm dia |
| 47 | Providing and Fixing Soil, Waste and Vent Pipes |
| 48 | 100 mm dia |
| 49 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 50 | 75 mm diameter : |
| 51 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 52 | Providing and fixing heel rest sanitary bend |
| 53 | 100 mm diameter : |
| 54 | Sand cast iron S&S as per IS - 3989 |
| 55 | 75 mm diameter : |
| 56 | Sand cast iron S&S as per IS - 3989 |
| 57 | Providing and fixing single equal plain junction of required degree |
| 58 | 100*100*100 |
| 59 | Sand cast iron S&S as per IS - 3989 |
| 60 | 75*75*75 |
| 61 | Sand cast iron S&S as per IS - 3989 |
| 62 | Providing and fixing collar: |
| 63 | 100 mm |
| 64 | Sand cast iron S&S as per IS - 3989 |
| 65 | Sand cast iron S&S as per IS - 3989 |
| 66 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 67 | 100 mm |
| 68 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good the walls and floors : |
| 69 | 100 mm inlet and 75 mm outlet |
| 70 | Sand cast iron S&S as per IS - 3989 |
| 71 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall |
| 72 | 15 mm dia nominal bore |
| 73 | 20 mm dia nominal bore |
| 74 | 25 mm dia nominal bore |
| 75 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall |
| 76 | 15 mm dia nominal bore |
| 77 | 20 mm dia nominal bore |
| 78 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 79 | 20 mm dia nominal bore |
| 80 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 81 | 20 mm dia nominal bore |
| 82 | Providing and fixing uplasticised PVC connection pipe with brass unions: |
| 83 | 45 cm length |
| 84 | 15 mm nominal bore |
| 85 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 86 | 20mm nominal bore |
| 87 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 88 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 89 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 90 | With common burnt clay F.P.S. (non modular) bricks |
| 91 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing complete so as to make it leak proof. |
| 92 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 93 | 100x100 mm size P type |
| 94 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 95 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 96 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : |
| 97 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 98 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 99 | Dismentling of Old glazed wall tiles including removal of malba from site complete. |
| 100 | Providing and fixing ISI marked water proof 30 mm thick flush door shutter of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core ,fungus resistant,eco friendly with 1mm thick lamination on both side with phenol formaldehyde resin conforming to IS:848, complete including the cost of liping in all respect of approved make |
| 101 | Dismantling G.I. pipes /HCI (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 102 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board or with studs complete in all respect of approved make |
| 103 | Providing and Fixing of CW Counter top WHB size 570x450mm with pressmatic tap make cera Comet including cost of CP waste complete in all respect |
| 104 | P/F of chinaware wall mounted/wall hanging Eurpeon Style complete with cistern with soft close seat cover and Twin flush fitting, hinges, accessories of approved colour with all other fittings make and size as approved by EIC. |
| 105 | Providing and fixing in position best indian make soap dish fixed into wall with CP Brass screws and complete in all respect of approved make |
| 106 | Providing and fixing health faucet make Jaquar/Kohler/Grohe or same range |
| 107 | Providing and fixing soap dispenser Jaquar/Kohler/Grohe or same range |
| 108 | Providing and fixing wash basin mixture Jaquar/Kohler/Grohe or same range |
| 109 | Providing and P trap of approved make |
| 110 | 100 mm |
| 111 | Providing and fixing C.P. brass bib cock of Jaquar/Kohler/Grohe or same range |
| 112 | 15 mm nominal bore |
| 113 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of Jaquar/Kohler/Grohe or same range |
| 114 | 15 mm nominal bore |
| 115 | Providing and fixing following drinking water coolers full body stainless steel SS PRIMA 150/400 Ltrs, with ISI mark non CFC Refrigerator, Reciprocating compressor complete in all respects. |
| 116 | Providing and fixing RO of approved make |
| 117 | Providing and fixing stablizer 500kv of approved make |
| 118 | Providing and fixing S.S Long bend for owc complete in all respect |
| 119 | Providing and fixing IRC jaali complete as per DNIT Please Enable Macros to View BoQ information |
