|
| 1 | Dismantling posts or struts any type and any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified. |
| 2 | Excavating in post holes in soft & loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified. |
| 3 | M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified. |
| 4 | S&F Mild steel angle or other section as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified. |
| 5 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 6 | Fixing only chainlink fencing including line wires, any mesh any type to standrard rails, straining bolts etc, including provn of binding wire etc complete all as specified |
| 7 | Supply only MS galvanised chain link fencing , any size or type |
| 8 | S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire, complete all as specified. |
| 9 | Supply only mild steel round bar of grade Fe-290(Gde E-165) complete all as specified and directed . |
| 10 | S&F Concertina coils 2.5mm thickness anti rust 450mm dia for fencing complete all as specified and directed by Engr in charge. |
| 11 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 12 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. |
| 13 | S&F 2mm thick (White/coloured)Fibre glass reinforced translucent corrugated/Plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall,gate etc. complete all as specified. |
| 14 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 15 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 16 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gde E 165) |
| 17 | Welding in repair nexc 2.5cm in length , thickness of metal to be welded exc 6mm but nexc 9mm complete all as specified and directed. |
| 18 | Welding in repair exc 2.5cm but nexc 5cm in length thickness of metal to be welded exc 6mm but nexc 9mm complete all as specified and directed. |
| 19 | Demolition of cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided for where directed complete all as specified or directed by the EIC NOTE:- In case of Drain,Rates incl cleaning and removing of all kinds of debris |
| 20 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; grill and grating;hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified or directed by the EIC |
| 21 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified or directed by the EIC. (Note: Demix mix will be done before execution of work ) |
| 22 | M&L Forming Construction joint 30mm deep x 10mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’ |
| 23 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick as in sub base to flooring including necessary form work complete all as specified. |
| 24 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc where directed complete all as specified or directed by the EIC |
| 25 | M&L Machine pressed precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35Grade with grey cement and pigment, complete all as specified. |
| 26 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed |
| 27 | S & F chequered, coloured cement concrete tiles 300x300x25mm size set jointed and pointed in neat cement slurry with grey cement and no pigment as in floors, including 15mm thick screed bed of cement mortar 1:4 complete all as specified and as directed |
| 28 | Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where directed a complete all as specified NOTE:- In case of Drain,Rates incl cleaning and removing of all kinds of debris |
| 29 | M&L for brick work with sub class `B' bricks,(old size bricks) straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 30 | M&L for brick work with sub class `B' bricks,(old size bricks)Except brick only straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 31 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC.NOTE:- In case of Drain,Rates incl cleaning and removing of all kinds of debris |
| 32 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 33 | Add or deduct for each 25 mm girth or part thereof over or under 30cm as item no 32 above complete all as specified and directed. |
| 34 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels/drains, and benching including finishing top of benching even and smooth using extra cement complete all as specified and directed. |
| 35 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate in coping,kneelars,apex stones,bed plates,kerb etc water troughs and the like including weathering, slightly rounded for chamfered angles and troathing including necessary form work complete all as specified and as directed. |
| 36 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 15mm th cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified. |
| 37 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete for granite stone |
| 38 | M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying exterior wall care putty waterproof (multi purpose mixershall be used for uniform and proper mixing of putty) and one coat of cement paint on walls by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 39 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified. |
| 40 | M&L for preparation of plastered or un plastered decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying exterior wall care putty waterproof (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of Weather proof paint over a coat of alkaline resistance primer by auto roller & leaving premises clean and tidy, complete all as specified & directed by Engineer-in-Charge. |
| 41 | M & L preparation of new plastered surfaces of walls and applying two coats of cement based paint over a chalk whitening over a plastered surface complete all as specified. |
| 42 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. Please Enable Macros to View BoQ information |
