|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair to Patient Waiting Area, Staircase Railing, Collapsible Gates, Steel Gates and Security Grills at CHNC and other areas and Repair/Maint to DBs, Switches, Wiring, Bulbs and other E/M Items at Electric Supply installations at MPH, Chettri and other locations under GE (Utilities) Udhampur Contract No: GE/U-48/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavating in post holes (or similar holes) after demolition, each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in hard / dense soil complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of GDE Fe 410, complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters and other steel work; fixed with angle cleats or other connecting plates GDE Fe410, complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F 10mm MS Plate (plain or chequered), caps, bases, splices, angle brackets, cleats & other connections complete all as specified and directed by Engineer-in-Charge. |
| 8 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge. |
| 9 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self taping screws complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 11 | S & F in repairs Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach necessary screws and washers in roof, wall etc. complete all as specified and directed by Engineer-in-Charge. |
| 12 | S & F 1.00 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repair aluminium anodised DECO grill 10mm thk, DG-104 fixed with necessery U/F/H channel, including cutting for handles tower bolts etc and providing U clip conceal the rough edges etc complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for painting to steel surfaces of any description over 10cm width or girth with 2 coats of synthetic enamel paint over a coat of red oxide over new surface complete all as specified and directed by Engineer-in-Charge. |
| 15 | M & L in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, balusters, rings, knobs, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement , embedding into concrete etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in repair toughened glass best quality 12 mm thick including cutting, rounding, glazing, edges moulding with glazing pin or oil putty etc. and also include necessary fixing arrangement such as corner clamps, bracket and bolt, hinges and other screws, washwers as required etc. in square, complete all as specified and directed by Engineer-in-Charge. Notes: No seperate measurement or payment shall be paid to contractor for the requirement of any fixing arrangement such as corner clamps, bracket and bolt, hinges and other screws, washwers as required for completing the work, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets electrical fittings, fan, fire sensors etc and making good disturbed surface as per existing complete all as specified and directed complete all as specified and directed by Engineer-in-Charge. |
| 18 | S & F aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto ceiling level as required on site with adjusting level and fixed to roof slabs by means of GI clamp 60mm long made out of 40 x 3mm GI flat and expansion hold fastner 12.5mm dia 40mm long @ 20cm c/c , complete all as specified and directed by Engineer-in-Charge. Note- Ceiling board will be measured & paid separately |
| 19 | S & F 9mm thick gypsum board of size 600mm x 600mm fixed in aluminium grid frame work in ceiling, making necessary holes, cutting for providing light, fan,fire cencers etc complete all as specified and directed by Engineer-in-Charge.Make: Armstrong and equivalent in /hunter duoglas/Everest / Anchor brand |
| 20 | Solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing & including on PVC frame, 6 mm thick ply between tile (dado) and roof level as per specified in MES schedule part-II complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repairs powder coated aluminium sections of various sizes required of sliding or fixed type for the frame and shutters of doors, windows, ventilators and wall partitions with one or more rebates etc.including necessary joining cleats, glazing clips, beading, rubber packing, screws and all other fittings like locking arrangement for shutters, handles, tower bolts hinges etc.complete all as specified and directed by Engineer-in-Charge. Note :- (i) Glazing and aluminium wire mesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight. |
| 22 | M&L for 4.80 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads, in square in exe 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F plain ACP board 5 mm thick fixed in aluminium joinery including cutting , packing , finishing complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including mild steel screw bolts / anchor bolts (machine made) with hexagonal / square heads at one end, to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm & n exc 15cm long dia of shank 11 to 15 mm and locking arrangements etc., complete all as specified and directed by Engineer-in-Charge. |
| 25 | S & F in repairs framed work as in security grills, guard bars etc., made of mild steel angle iron and steel square bars, flat irons fixing by fabrication, welding etc. including steel doors (as required) and also including necessary hinges, locking arrangements etc. complete all as specified and directed by Engineer-in-Charge. |
| 26 | S & F stainless steel framed work as in doors or gates, partition wall, sections as required with gusset plates, rails, braces, etc., complete, including fixing by fabrication, welding etc. including of SS sheeting or glazing as required also doors required to be hanging or sliding with and including either hooks and hinges or steel hanging door fittings, hinges, running rails and guides and necessary fastening, fxing and locking arrangements etc. complete all as specified and directed by Engineer-in-Charge.Note: - Glazing shall be measured and prepared seperately. |
| 27 | Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F Steel rolling shutter (curtain made of 1mm thick mild steel sheet) area exc. 5sqm each with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type ,thickness of laths 1mm ,incl taking down carefully existing old rolling shutter complete all as specified and as directed by Engr-in-charge. |
| 29 | Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed by Engineer-in-Charge. |
| 30 | Brick work with sub-class 'B' bricks, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 33 | M & L 1mm thick Birla white/JK white putty over a coat of primer to the newly plasterd surfaces complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L two coat of acrylic paint exterior grade (100% Acrylic) over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces and also include necessary scaffolding and safety arrangement upto 20mtrs height, complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a two coat of water proofing chemical f white primer, complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for applying two coat of oil bond distemper on walls old plastered surfaces over two coats of water proofing chemical , including complete removal all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair stainless steel patti , passer nut and bracket for fixing toughened glass in railing etc complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair stainless steel patti , passer nut and bracket for fixing toughened glass in railing etc complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F ACP (acrylic sheet ) board on gates moulded letter of size 1' x1' in any colour with good quality LED strip light with NIRAMAY HOUSE, JCO'S CLUB, COMMAND HOSPITAL (NC) unit logo and formation sign including constant current electronic driver and making connection with sutable size copper conductor multistrandded FRLS wire complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs stainless steel wire cloth wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40mm complete fixed with aluminium wire staples and beads etc complete all as specified and directed by Engineer-in-Charge. |
| 41 | S & F in repairs Solar control film 25 micron of any colour reflective type sticked to glass panes of any sizes as per instructions of manufacturers complete, including necessary scaffolding etc., complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F powder coated aluminium shutters /sliding shutter aluminium section weighing 0.55 Kg /m including necessary joining cleats galzing clips , rubber neoprene packing handle 2 Nos in each door, hinges anodised aluminium sanp beading screw etc complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F Solid PVC Fluted/ charcol wall panel 9mm thick of any colour /pattern single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing & including on PVC frame 6 mm thick ply between tile (dado) and roof level as per specified in MES schedule part-II complete all as specified and directed by Engineer-in-Charge. |
| 44 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge. |
| 45 | Taking down carefully alu./copper point wiring for light, fan, socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and making good to disturbed surfaces of walls floors etc and complete all as specified and directed by Engineer-in-Charge. |
| 46 | M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit, PVC board with sunken box for fixing of switches, sockets,light, fan regulators etc for the following complete all as specified and directed by Engineer-in-Charge. |
| 47 | One light/fan/bell point or one fan point controlled by one switch |
| 48 | One 3/5 pin socket outlet, 5 Amp independent board |
| 49 | One 5 Pin socket outlet , 5 Amps, SP on the same board. |
| 50 | One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size . |
| 51 | S&F Piano type switch one way 6 Amps , 240 Volt, ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F Switch Piano type single pole 15 Amps one way 240 Volt, ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F socket outlet 2 in 1,3/5 pin piano type 5 Amp flush type ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F socket out let 5 /15 Amps 2 in 1 , 3 pin flush type complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F of electronic step type regulator of capacity 240 volts flush type ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing in replacement of LED light fitting 4 feet 1 x 20 W, 220 V AC Decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing in replacement of LED light fitting mirror type with high output diffuser 2 feet, 1 x 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25 mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1), complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F Sheet metal enclosure factory made for DBs Triple pole and neutral single door 415 volts 4 way with one triple pole MCB 63A,suitable for MCCBs and fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 2 way complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F MCB TPN, 240 Volts , 10 Ka, 40 to 100 Amps, complete all as specified and directed by Engineer-in-Charge.Make:-Havells/Legrand/Schenider |
| 66 | S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 KA, 40 to 63 Amps, 30mA complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F MCB single pole 240 Volts , 6 to 32 Amps complete all as specified and directed by Engineer-in-Charge.Make : Havells/Legrand/Philips |
| 68 | Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as specified and directed by Engineer-in-Charge. |
| 69 | Description all as per Serial item No 63.00 here- in- before, but for exhaust/cabin fans of any size/make |
| 70 | S&F Plug top with indicator 16 amp , 3 pin, ISI Marked complete all as specified and directed by Engineer-in-Charge.Make:-Havells/Anchor/legrand |
| 71 | Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning complete all as specified and directed by Engineer-in-Charge.(Note|-Parts/components will be measured and paid seperately under their respective items) |
| 72 | Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and directed by Engineer-in-Charge. |
| 74 | Top / bottom canopy of required size with tightening screws, complete all as specified and directed by Engineer-in-Charge. |
| 75 | Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, complete all as specified and directed by Engineer-in-Charge.Make :- NBC, SKF, |
| 76 | Ball bearing suitable for exhaust fan 300 mm sweep of different make, complete all as specified and directed by Engineer-in-Charge. |
| 77 | Split pins of galvanished iron 1/8\\" dia, 2\\" length complete all as specified and directed by Engineer-in-Charge. |
| 78 | Rewinding of exhaust fan 300 mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, ccomplete all as specified and directed by Engineer-in-Charge. |
| 79 | Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and directed by Engineer-in-Charge. |
| 80 | Description all as per Serial item No 74.00 here- in-before, but for 3.15 MFD. |
| 81 | Description all as per Serial item No 74.00 here- in-before, but 4 MFD for Exhaust Fan |
| 82 | Supply & Fixing of Building Security LED light with fitting 30 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engineer-in-Charge.Make-Bajaj Cat Part No. ENXT P 36L WH PO PC SD MT/Philips / Crompton. |
| 83 | Supply and fixing Acrylic sheet molded letters ( CHETRI POWER HOUSE GE(UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light with MES logo including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire complete all as specified and directed by Engineer-in-Charge.Make of LED strip should be of Philips/Bajaj /Wipro |
| 84 | Supply and fixing Acrylic sheet molded letters ( MAIN POWER HOUSE GE(UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light with MES logo including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire complete all as specified and directed by Engineer-in-Charge.Make of LED strip should be of Philips/Bajaj /Wipro |
| 85 | Supply and fixing in replacement of LED light fitting 1x9W/1X10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |