|
| 1 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 1000 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front and rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 2 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 630Amps, 50 Hz with breaking capacity 50 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500Amps class 1 - 01 Nos(e) Digital Ammeter 0 to 200Amps class 1 - 01 NosOUTGOINGS:-(a) MCCB 4 Pole, 415 V, Adjustable type, 350Amps, 50 Hz with breaking capacity 25 KA - 03 Nos (b) MCCB 4 Pole, 415 V, Adjustable type, 250Amps, 50 Hz with breaking capacity 25 KA - 03 Nos(c) MCCB 4 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA - 01 Nos |
| 3 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 800 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 4 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3(c) MCCB 4 Pole, 415 V, Adjustable type, 350Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500Amps class 1 - 01 Nos(e) Digital Ammeter 0 to 200Amps class 1 - 01 NosOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100Amps with breaking capacity 16 KA - 08 Nos |
| 5 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 500 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 6 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3(c) MCCB 4 Pole, 415 V, Adjustable type, 250Amps, 50 Hz with breaking capacity 25 KA-01 Nos (Incoming)(d) Digital Voltmeter - 0 to 500Amps class 1 - 01 Nos(e) Digital Ammeter 0 to 200Amps class 1 - 01 NosOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 07 Nos |
| 7 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 300 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 8 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA -01 Nos (Incoming)(d) Digital Voltmeter - 0 to 500Amps class 1 - 01 Nos(e) Digital Ammeter 0 to 200Amps class 1 - 01 NosOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 03 Nos(b) MCCB, 4 pole, 40/63, 50 Hz, 415 Volt,16 KA - 01 Nos(c) MCB TP, 25 Amps, 50 Hz, 415 Volt,10 KA 'B' - 01 Nos |
| 9 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 600 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front and rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 10 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, fixed type, 350 Amps with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 07 Nos |
| 11 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 400 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 12 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 250Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, Adjustable type, 125Amps, 50 Hz with breaking capacity 25 KA - 01 No(b) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 01 No(c) MCCB 4 pole, 63Amps, 50 Hz, 415 Volt,16 KA - 06 Nos |
| 13 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 500 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 14 | INCOMING:-(a) CTs for suitable amps(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 250Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 03 Nos(b) MCCB, 4 pole, 40/63 Amps, 50 Hz, 415 Volt, 16 KA - 02 Nos(c) MCB TPN, 25 Amps, 50 Hz, 415 Volt, 10 KA 'B' series - 01 No |
| 15 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 400 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 16 | INCOMING:-(a) CTs for suitable amps(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 05 Nos |
| 17 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 400 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 18 | INCOMING:-(a) CTs for suitable amps(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 03 Nos(b) MCCB 4 pole, 40/63 AMPS, 50 Hz, 415 Volt,16 KA - 02 Nos(c) MCB TPN, 25 Amps, 50 Hz, 415 Volt, 10 KA 'B' series- 01 No(d) Three phase automatic transfer changeover switches, 4 Pole, 63 Amps - 01 No |
| 19 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 600 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 20 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 350 Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, Adjustable type, 160 Amps, 50 Hz with breaking capacity 25 KA - 01 No (b) MCCB 4 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA - 01 Noc) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 02 Nos |
| 21 | Supply, install, test and commissioning factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 400 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc. Independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 22 | INCOMING:-(a) CTs for suitable amp(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, Adjustable type, 160 Amps, 50 Hz with breaking capacity 25 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter - 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 02 Nos(b) MCCB, 4 pole, 40/63 AMPS, 50 Hz, 415 Volt, 16 KA - 02 Nos(c) MCB TPN, 25 Amps, 50 Hz, 415 Volt, 10 KA 'B' series - 01 No |
| 23 | Supply, install, test and commissioning factory made made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 400 Amps rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-54 class protection and made of 3.15 mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej (freedom) lock with 2 keys) and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc., independent chambers to accommodate including taking down complete all as specified and as directed with the following accessories:- |
| 24 | INCOMING:-(a) CTs for suitable amps(b) Indicator lamp Set of 3 (RYB)(c) MCCB 4 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA - 01 No (Incoming)(d) Digital Voltmeter - 0 to 500 Amps class 1 - 01 No(e) Digital Ammeter 0 to 200 Amps class 1 - 01 NoOUTGOINGS:-(a) MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA - 02 Nos(b) MCCB, 4 pole, 63 AMPS, 50 Hz, 415 Volt,16 KA - 03 Nos |
| 25 | Supply and fix LED Street light 90 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant including taking down of existing light fitting with driver and lamp complete all as specified and as directed. |
| 26 | Supply and fix LED flood light 120 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant including taking down of existing light fitting with driver and lamp complete all as specified and as directed. |
| 27 | Supply and fix MCCB 4 Pole, 415 V, fixed type, 350 Amps with breaking capacity 25 KA including existing taking down MCCB of any type or any size complete all as specified and as directed. |
| 28 | Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 160Amps, 50 Hz with breaking capacity 25 KA including taking down existing MCCB of any type or any size complete all as specified and as directed. |
| 29 | Supply and fix MCCB, 4 pole, 40/63 AMPS, 50 Hz, 415 Volt,16 KA including taking down existing MCCB of any type or any size complete all as specified and as directed. |
| 30 | Material and labour for Earthing complete with using GI earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using galvanised iron strip 25x4mm as earthing lead moulded and retrieved to earth plate at one end and connected to main switch / control board at another end with and including 40 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provision of PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) duly reinforced with mild steel round bar 8 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessary excavation and earth work including laying the pipe concealed in floor / wall all as per plate No.5 of SSR Part-I complete all as specified and as directed including testing on completion Note: If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt. |
| 31 | Material and labour for Earthing complete with using GI earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using galvanised iron wire 4mm dia as earthing lead moulded and retrieved to earth plate at one end and connected to main switch / control board at another end with and including 40 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provision of PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) duly reinforced with mild steel round bar 8 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessary excavation and earth work including laying the pipe concealed in floor / wall all as per plate No.5 of SSR Part-I complete all as specified and as directed including testing on completion Note: If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt. |
| 32 | Excavation in trenches not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out in soft soil/ disintegrated rock/ laterite rock complete all as specified and as directed. |
| 33 | Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in any type of strata etc complete all as specified and as directed. |
| 34 | Removing excavated surplus soft/ disintegrated rock not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 35 | Material and labour for providing sand cushioning for protection of UG cable in trenches with riddled sand/ M sand including filling, spreading and punning down to desired thickness complete all as specified and as directed.Note: Punned thickness only will be measured and paid separately. |
| 36 | Supply and laying un-reinforced precast concrete cable cover, class LV, type1, flat, size 250 x 150 x 40mm in trenches for protection of UG Cable with width equal to length of PCC cover, laid dry and flat complete all as specified and as directed. |
| 37 | Supply and fix GI pipe medium grade with all fittings and laid in trenches for cable protection including taking down existing pipe etc complete all as specified and as directed of the following sizes |
| 38 | (a) 80mm bore size. |
| 39 | (b) 50mm bore size. |
| 40 | (c) 40mm bore size. |
| 41 | Material and labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric cables with stranded aluminium conductor, 1100 volt grade, laid in trenches/ through GI Pipe/ fixed along with pole structure including taking down existing LTUG cable etc complete all as specified and as directed of following sizes.Note : Necessary earthwork, cable protection items shall be measured and paid separately under relevant items |
| 42 | (a) 3.5 core x 400 sqmm. |
| 43 | (b) 3.5 core x 240 sqmm. |
| 44 | (c) 3.5 core x 150 sqmm. |
| 45 | (d) 3.5 core x 95 sqmm. |
| 46 | (e) 3.5 core x 70 sqmm. |
| 47 | (f) 3.5 core x 50 sqmm. |
| 48 | (g) 3.5 core x 35 sqmm. |
| 49 | (h) 4 core x 25 sqmm. Please Enable Macros to View BoQ information |
