|
| 1 | Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good posts embedded in concrete complete all as specified and directed. |
| 2 | M & L for excavating in post holes for soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm concrete complete all as specified and directed. |
| 3 | M & L for mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc conforming to Fe-290 Gde E-165. |
| 4 | M & L for preparing new steel and applying two coats of synthetic enamel paint and incl over a coat of red oxide over 10 cm in width or girth complete all as specified and directed. |
| 5 | M&L PCC 1:3:6 type C2 (using 40 mm graded aggregade) in foundation for post holes complete all as specified and directed. |
| 6 | Dismantling fencing wire mesh any type , complete all as specified and directed by Engineer-In- Charge. |
| 7 | Supply only Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm complete all as specified and directed.Note : BOO shall be convened by Engr-in-charge for finalinzing weight of chain link fencing /sqm before execution of work at site. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. |
| 9 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck in mm 11 mm to 15 mm complete all as specified and directed. |
| 10 | S&F mild steel tie bars with screwed ends, nut washers and mild steel plates for fencing, etc. king rods and straining bolts confirming to Fe 290. Gde E-165 complete all as specified and directed. |
| 11 | M&L in repairs for random rubble stone masonary, uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) completed all specified and directed by Engineer-in-Charge. |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Eng-in-Charge. |
| 13 | M & L for Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement complete all as specified and directed. |
| 14 | M & L for Rendering 15 mm thick cement mortar (1:6) on fair faces of stone masonary wall surfaces, complete all as specified and directed by Eng-in-Charge. |
| 15 | M&L applying two coats of cement base paint, white or tinted on new wall surface over and including a coat of primer including preparation of surface all as specified and directed by Engg-In- Charge. |
| 16 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed by Eng-in-Charge. |
| 17 | S& F for Mild steel work riveted, bolted or welded in built up sections, Greatings of drain, wicket gate and all type of framed work, including cutting, hoisting, fixing in position complete all as specified and directed by Eng-in-Charge. |
| 18 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base/ plinth protection/ drain/path etc and incl demolition complete all as specified and directed. |
| 19 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar parapets and railings, copings, kneelers, apex stones, bed plates, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required including demolition of existing concrete complete all as specified and as directed by EIC. |
| 20 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified |
| 21 | M & L for Granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. Please Enable Macros to View BoQ information |
