|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: COMPREHENSIVE REPAIR/ MAINT OF CHAJJAS, FACIA, SLAB, WALL GRIT, EXTERNAL TREATMENT INCLUDING ROOF REPAIR, LEAKAGE/ SEEPAGE OF BLDGS, CONNECTED PATHS, TILING, FLOORING, PLINTH PROTECTION, ROOF TREATMENT, POST CONSTRUCTION ATT AND CERTAIN OTHER MISC REPAIR OF WORKS AT DAD COMPLEX PANCHWATI UNDER GE NEW DELHI Contract No: GE/ND-01/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed by Engg in charge. |
| 3 | Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed. |
| 4 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed. with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed. |
| 5 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 43 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 14 metre height) complete all as specified and directed.Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guniting is done with polycretes admixture @ 2% by weight of cement all as per manufacturers instructions (polycretes admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 6 | M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beams and similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxy Arcylate based anchoring adhesive at all heights and levels, 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars with necessary scaffolding required for completion of work upto fourth storey height including all safety factor complete all as specified and directed. |
| 7 | M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beams and similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxy Arcylate based anchoring adhesive at all heights and levels, 14 mm dia hole suitable for inserting 10 mm dia reinforcement bars with necessary scaffolding required for completion of work upto fourth storey height including all safety factor complete all as specified and directed. |
| 8 | M&L for additional reinforcement for strengthening the existing RCC structure, TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips with necessary scaffolding required for completion of work upto fourth storey height including all safety factor complete all as specified and directed. |
| 9 | M&L for TMT bars 5 mm dia up to and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips including U\\"shape stirrups with necessary welding required at site with necessary scaffolding required for completion of work upto fourth storey height including all safety factor complete all as specified and directed. |
| 10 | M&L for preparation of exposed surface of rusted steel reinforcement with metal wire brush cleaning the rusted surface free from loose rust and application of rust remover cum passivator applied with brush to the rusted reinforcement, application of rust remover with the help of wire brush, sand paaper and thoroughly washed with water with the help of pressure jet and allowing it to dry at all heights level complete including dismantling/ chipping off spalled/loose concrete cover of RCC surface of chajjas, parapets, railings, beams, columns and the like with out disturbing the core of RCC member with necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor complete all as specified and directed.Note: Surface area of steel reinforcement bars shall only be measured for the purpose of payment only. |
| 11 | M&L for Preparation of surfaces of steel reinforcement by cleaning thoroughly and providing, mixing and applying zinc-anti-rust agent as zink rich epoxy anticorrosive coating for corrosion protection system in two coats @ 0.20 kg/sqm/coat. The product should confirm carbonation resistance of 2 mm and bond strength > 1 N/ sq mm according to ASTM C 882-78. and as per manufacturers method of application to rebar corrosion protection system to reinforcement at all height levels with necessary scaffolding required for completion of work upto fourth storey height including all safety factor complete all as specified and directed by Engg in charge.Note: Surface Area of steel reinforcement bar shall only be measured for the purpose of payment. |
| 12 | M&L for outdoor tile parking tiles size 400 x 400 mm conforming to IS 15622:2017 including 20mm screed bed in CM 1:6 as in flooring over 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregates) including dismantling of old unsv tiles complete all as specified and directed. |
| 13 | M&L for Providing & Pouring Micro concreting M-40 grade :-(I) Dry concrete substrate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : Master Emaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note: Form work shall be 100% leak proof. The cost of micro concrete M-40 grade, formwork & Epoxy bond coat is included in this item. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided incl removing the demolished material outside the MOD land for complete all as specified and directed. |
| 15 | M&L for providing 75 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as finishing surface of concrete in base layer for tiles, stones and other miscellaneous works related to flooring complete all as specified and directed. |
| 16 | M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and directed. |
| 18 | Demolition of reinforced cement concrete in roof, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work as specified including removal out side MoD land complete all as specified and directed.Note: Necessary scaffolding required for completion of work upto fourth storey height including all safety factor. |
| 19 | M&L for form work to sides and soffits of floor or roof beams, cantilevers, shelves incl supports, overhang for rough finished flat surfaces complete all as specified and directed.Note: necessary scaffolding required for completion of work upto fourth storey height including all safety factor |
| 20 | M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded crushed stone aggregate) as in Chajjas and the like complete all as specified and directed. Note: necessary scaffolding required for completion of work upto fourth storey height including all safety factor. |
| 21 | M&L for Glazed ceramic coloured walls tiles (300X200, 350X250, 450X350mm), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:3, finished even and fair as in backing layer complete including dismantling of old tiles complete all as specified and directed. |
| 22 | M&L for 7-8mm thick any coloured vitrified ceramic tiles in floors, area of each tile n. exc. 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling of old tiles complete all as specified and directed. |
| 23 | All as per Item No 21.00 above but as in Skirting with 10mm thick rendering in CM 1:3 in vertical surfaces including dismantling of old tiles complete all as specified and directed. |
| 24 | M&L for cement concrete chequered PU coated tiles 300x300x25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed. |
| 25 | Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc complete all as specified and directed. |
| 26 | M&L for coloured granite (of any type and coloured) 18-20 mm thick table rubbed and polished as in Floor, cooking platform, and the like machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting, making hole of 20 mm dia for gas pipe at suitable location as directed at site and polishing complete all as specified and directed. |
| 27 | All as per item No 25.00 above but as in vertical surfaces such as dado/skirting laid over and including renderning 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete all as specified and directed. |
| 28 | M&L for Dholpur stone cladding 16-18mm gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25sqm area and not exc 0.5 sqm area fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment.Rendering 10mm thick on fair faces of brickwork or concrete surfaces 15mm thick in CM 1:3 with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete all as specified and directed. |
| 29 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engg in charge. |
| 30 | M&L for rounding to edges of stone slabs one edge such as steps, cooking platforms and other similar situations complete all as specified and directed. |
| 31 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed. Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor. |
| 32 | S&F Pre- painted galvanized aluminum zinc coating GI based steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor. |
| 33 | Dismantling wrought iron or mild steel work of any description not other wise described complete all as specified and directed. Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor. |
| 34 | M&L for MS Plates 5mm thick (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- B complete all as specified and directed.Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor. |
| 35 | S&F structural mild steel work as in pole, main rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe410 w (gde E250 QUALITY A) complete all as specified and directed.Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor |
| 36 | S&F structural mild steel work as in roof trusses (framed), trussed, post, purlins, crane gantries, rails and fastenings and heavy bracket framing etc (beam, tee, angle, channel or flat section) including distance pieces, cleats etc confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed. Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor |
| 37 | S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, tank cage, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed. Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor |
| 38 | M&L for two coats of synthetic enamel paint on new steel and iron surfaces over a coat of red oxide primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed.Note: necessary scaffolding/form work required for completion of work upto fourth storey height including all safety factor |
| 39 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and directed. |
| 40 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 20 mm bore GI tubings complete all as specified and directed. |
| 41 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 25 mm bore GI tubings complete all as specified and directed. |
| 42 | S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 40 mm bore GI tubings complete all as specified and directed. |
| 43 | Supplying and laying in repair of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.Note: All fittings, connection and chemical used for adhesive included in the given rates |
| 44 | S&F in repair, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 15mm dia pipe (ISI Marked) complete all as specified and directed. |
| 45 | All as per item No 43.00 above but for 20mm dia pipe complete all as specified and directed. |
| 46 | All as per item No 43.00 but for 25mm dia pipe complete all as specified and directed. |
| 47 | All as per item No 43.00 but for 40mm dia pipe complete all as specified and directed. |
| 48 | S&F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 49 | S&F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 50 | S&F in repair PVC (SWR) bends, tee and shoes of any radius of 110 mm bore complete all as specified and directed. |
| 51 | S&F in repair PVC (SWR) bends, tee and shoes of any radius of 75 mm bore complete all as specified and directed. |
| 52 | S&F in repair PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 53 | S&F in repair 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. |
| 54 | S&F in repair 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. |
| 55 | All as per item No 52.00 above but fixed on walls complete all as specified and directed. |
| 56 | All as per item No 53.00 above but fixed on walls complete all as specified and directed. |
| 57 | S&F in repair cast iron tee, bend, Ysingle or branch piece ( equal or unequal) ordinary or inverted of 75 mm dia complete all as specified and directed. |
| 58 | S&F in repair cast iron tee, bend, Ysingle or branch piece ( equal or unequal) ordinary or inverted of 100 mm dia complete all as specified and directed. |
| 59 | S&F in repairs low level flushing cistern of 10 litre capacity PVC valveless, dual tank, syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified and directed.Make: Cera, Hindware, Parryware |
| 60 | S&F in repair, brass chromium plated health faucet including flexible pipe of 15mm bore and 1.20 m long with and including 15mm bore complete all as specified and directed.Make: Cera, Hindware, Jaguar |
| 61 | S&F in repair stainless steel plate rack of size 60x 60x25cm made with 1.0 mm thick sheet complete all as specified and directed. |
| 62 | S&F in repair Vitreous china squatting pan of orissa patern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.Make: Cera, Hindware, Parryware |
| 63 | S&F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 64 | S&F in repairs 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 65 | S&F in repairs 15 mm dia stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 66 | S&F in repairs 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 67 | S&F in repair Brass CP mixer (Central hole basin mixer), for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 68 | S&F in repair Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.Make: Cera, Jaguar, Hindware |
| 69 | S&F in repair floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 70 | S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cutting for and pinning in ends of brackets in walls and making good complete all as specified and directed. |
| 71 | S&F in repair stainless steel sink of size 914x460x203mm with bowl size 405x354x203mm. with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and directed. |
| 72 | S&F in repairs stainless steel sink of size 510x430mm with bowl size 428 x 380 x 200mm with out drainage board made out of, 304 grade Stainless steel,1.00 mm thick sheet for kitchen with cantilevers connecting union complete all as specified and directed. |
| 73 | M&L for demolition of cement concrete in the sunken floor and and removing rubbish and cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment as under :-(a) Providing upto 50 mm concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with liquid WPC to maintenance damage/smooth sunken floor surfaces. (b) Applying 15mm thick plaster in CM 1:4 admixed with WPC all around of sunken floor . (e) Fixing of GI tubing 40 mm dia of medium grade for spout length as per site for sunken floor. (b) Apply WPC with cement slowly as 1:20 ratio or as per manufacture instruction upto to top of sunken portion.(f) Applying 2 full coats of brush bond acrylic emulsion based elastomeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat.(c) Fixing the all GI/CI/PVC pipe/fiftings of any dia (Pipe/fittings will be measured and paid separately) and laying half bricks all surrounding of the pipe/fittings.(d) Filled the all half bricks gaps with cement mortar in 1: 3 ratio mixed with WPC 200ml per 50kg of cement.(e) Over plaster apply WPC with cement slowly as 1:20 Ratio or as per manufacture instruction to achieve smooth surface.(f) Provide PCC 40 mm thick 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) mixed with water proofing compound as per manufacture instruction over PCC 1:5:10 as remain portion of in sunken floor complete all as specified and directed (Note : Measurement will be taken as floor area of the sunken floor) |
| 74 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.Note: The work shall be carried out upto sixth storey height of buildings |
| 75 | M&L for rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 76 | M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. |
| 77 | M&L for 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 78 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed. |
| 79 | M&L for Brick work with sub class \\"B\\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 80 | M&L for Brick work with sub class \\"B\\" bricks, straight or curved on in half brick thick wall built in cement mortar (1:4), complete all as specified and directed. |
| 81 | Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed. |
| 82 | M&L for Preparation of new plastered surfaceon walls and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over two coat of disteemper oil emulsion complete all as specified and directed. |
| 83 | M&L for Preparation of new plastered surface on celing and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over two coat of disteemper oil emulsion complete all as specified and directed. |
| 84 | M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 1.5mm thick wall care putty complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) not earlier than 30 days from bid submission start date of subject work (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 85 | M&L for complete removal of existing treatment and applying 1mm thick wall care putty to achived smooth surface and then applying two coats of oil bound distemper over a coat of chalk whitening as priming coat after preparation of celing surfaces complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) not earlier than 30 days from bid submission start date of subject work (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 86 | M&L for complete removal of existing treatment and applying finishing walls with Acrylic Smooth exterior paint of required shade two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) not earlier than 30 days from bid submission start date of subject work (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates. |
| 87 | M&L for new plastered/ unplastered surface of wall and applying finishing walls with Acrylic Smooth exterior paint of required shade two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Note : (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) not earlier than 30 days from bid submission start date of subject work (c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.Note: Make and Brand for Periodical Services and painting items are as under:-(i) Make for wall putty for first coat: Birla wall seal putty/ Asian smart care putty/ JK wall maxx putty(ii) Make for wall putty second coat: Asian paint trucare acrylic wall putty/ Berger happy wall acrylic putty/ Nerolac premium acrylic wall putty(iii) Make for Exterior acrylic emulsion: Asian apex ultima/ Berger weather coat long life/ Nerolac excel total/ Birla Opus Primer exterior E70(iv) Make for OBD: Asian tractor UNO/ Berger bison acrylic distemper/ Nerolac beauty acrylic distemper(v) Make for synthetic enamel paint: Asian paint apcolite premium gloss enamel/ Berger luxol high gloss enamel/ Nerolac synthetic hi gloss enamel |
| 88 | S&F in repair aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and directed. |
| 89 | S&F aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and directed. |
| 90 | S&F in repair aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified and directed. |
| 91 | S&F aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified and directed. |
| 92 | S&F in repair aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified and directed. |
| 93 | S&F aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified and directed. |
| 94 | S&F in repair aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 95 | S&F aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed. |
| 96 | S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed. |
| 97 | S&F in repair Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed. |
| 98 | S&F Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed. |
| 99 | Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed. |
| 100 | M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed. |
| 101 | M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed. |
| 102 | S&F in repair 40mm dia, cup board knobs brass polished with nut, screw and washer complete all as specified and directed. |
| 103 | S&F in repair Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, including welding if requied placed MS flat complete all as specified and directed. |
| 104 | S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, including welding if requied placed MS flat complete all as specified and directed. |
| 105 | S&F in repair Stainless steel drapery curtain rods gold and antique silver 25 mm nominal dia and minimum wall thickness 1.20mm of SS -304 grade of approved brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod complete all as specified and directed. |
| 106 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and directed. |
| 107 | S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 108 | S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 109 | Taking down chowkats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 110 | Taking down chowkats or frames exc. 1.5 sq. m but not exc 4 sqm each with shutters (without taking off shutters from the frames) , complete all as specified and directed. |
| 111 | Taking down shutters of any description exc 1 sq. m and not exc 2 sqm each, and refixing in same opening complete all as specified and directed. |
| 112 | S&F steel window/ ventilator Z sec with side hug shutter factory made including projecting type hinge with steel handle and steel peg stay etc. complete with glazing bars complete confirming to Fe 410-0 and making good complete all as specified and directed. |
| 113 | M&L for Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 114 | S&F factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing complete all as specified and directed. |
| 115 | S&F in repair for stainless steel butt hinges of size 100mm complete all as specified and directed. |
| 116 | S&F stainless steel butt hinges of size 100mm complete all as specified and directed. |
| 117 | Dismantling brick tiles or terracing tiles single layer on roof laid, bedded and pointed in any mortar incl removing the unserviceable material out side the MOD land complete all as specified and directed. |
| 118 | Demolition of Mud phuska in roofs, any thickness inc plastering & leaping plaster complete all as specified and directed. |
| 119 | M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 120 | M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to five stories of Bldg, using water proofing compound as per manufacturer instruction complete all as specified and directed.Note:- Water proofing compound shall be measured and paid separately. |
| 121 | M & L for:(a) Cleaning the surface, remove dust, dirt, loose particles and unsound substrate and grading with cement mortar (1:4), 10 mm thick, as in slab surfaces, beams, columns, parapet, and junction of walls etc., grading with a slope of 1 in 120 mixed with liquid/integral water proofing compound as per manufacturer's instruction as approved by GENote: (water proofing compound to be measured separately). (b) Applying evenly a tack coat of water proofing shield primer @ 0.50 Kg/ Sqm as a bonding layer over finished plaster surface including cleaning the surface. (c) Over the coat of bitumen bonding layer as above APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm and minimum 3 mm thick einforced with polyester non wove fabric (weight not less than 150 gms/sqm), unrolled and bonded completely to the substrate with side over lap of 5 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flam technology method as per manufacture instruction. (d) Sealing edges well into grooves & protect with CM 1:2 complete all as specified and directed.Make: Ms Sika India Pvt Ltd/ Ms IWL India Ltd/ Ms Torchtar Membrane & Bitumen Products Pvt Ltd/ Ms Fosroc Chemical/ Ms Asian Paints Ltd |
| 122 | M&L for cement concrete tiles of size 25 cm x 25 cm x 22 mm thick, machine pressed, set, jointed and pointed in neat cement slurry with grey cement and no pigment in roofs, floors over and including screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 123 | Dismantling water tanks of capacity not exceeding 500 litres complete all as specified and directed. |
| 124 | Disconnecting existing tanks setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 125 | S&F 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed. |
| 126 | M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing, cover slab, manhole cover etc including necessary form work, set in cement mortar 1:4 including demolion complete all as specified and directed.Note :- The rates for these items deemed to be included for cleaning of complete house such as floor(includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after Apex/painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during Apex & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge. The above work shall be carried out upto sixth storey height of buildings including all safety factor |
| 127 | M&L for uprooting grass/ plants (girth n.exc 15 cm of trunk to any of plants)grown along the pipes or walls, chajjas, parapets and roof or any othder location on the building upto sixth storey height including making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth with necessary scaffolding/form work required for completion of work upto sixth storey height including all safety factor complete all as specified and directed.Note: (a) Srl Item No 03.00, 04.00, 11.00, 12.00, 14.00, 15.00, 19.00 to 21.00, 23.00, 25.00 to 28.00, 31.00, 34.00 to 36.00, 58.00 to 67.00, 69.00 to 71.00, 75.00, 78.00, 85.00, 86.00, 104.00, 111.00 to 113.00, 119.00 to 121.00, 124.00 & 125.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
