|
| 1 | M&L for repairs to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in roads etc cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg/10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (incl supply of premixed macadam , binder and chippings) depth of pot holes exceeding 30mm. complete all as specified and directed by Engr-in-charges. |
| 2 | M&L for preparing the existing black top surface with wire brushes for removing caked mud etc scraping with brooms and finally fanning with cleaned surface with gunny bags to remove all loose dirt etc and M&L Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2 - 0.3 kg/ sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and directed by Engr-in-charges. |
| 3 | M& L for providing bitumen premix Semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content (paving bitumen VG-40) by weight of total mix, mixed in computerized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 12 tonne capacity complete all as specified and directed by Engr-in-charge. |
| 4 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc. 400 Sqm and depth exc 50 mm but n.exc 100 mm deep complete all as specified and directed by Engr-in-charges. |
| 5 | M&L for screening road metal, chippings etc on the site of work, when specially ordered including removing screened materials clear of screen and stacking in separate heaps for measuring. (Materials from both sides of screen measured) complete all as specified and directed by Engr-in-charges. |
| 6 | M&L for Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13, WMM laid in two layers of 75 mm each of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013. complete all as specified and directed by Engr-in-charges. |
| 7 | Ditto- all as per serial item No.6 here-in- before but except material. (Note- Material retrived from item No.4 to be reused after screening.) complete all as specified and directed by Engr-in-charges. |
| 8 | M&L for Preparing WMM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and M&L Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at application of 0.7-1.0 kg/sqm on surface of WMM/ WBM as specified in Table 500-3 of MoRTH mechanical sprayer complete all as specified and directed by Engr-in-charges. |
| 9 | Material and labour for premix semi dense asphaltic concrete bituminous macadam using paving bitumen (paving bitumen VG-40 grade) penetration, with binder content @ 4.5% of total mix, laid/rolled with mechanical paver and power roller 8 to 10 tonne capacity and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and directed by Engr-in-charges. |
| 10 | M& L for providing bitumen premix Semi dense asphaltic concrete 40mm consolidated thickness with 5.50% binder content (paving bitumen VG-40) by weight of total mix, mixed in computerized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 12 tonne capacity complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for preparing bituminous surfaces of road and marking 2.5 mm to 3 mm thick centre lines stop lines, dashed, arrrows etc.and the like exc 10cm but not exc 20cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer instructions and remove old thermo plastic road paint marking as per ground requirement complete all as specified and directed by Engr-in-charges. |
| 12 | M&L for preparing bituminous surfaces of road and marking 2.5 mm to 3mm thick Zebra crossing with yellow and white, arrrows etc. and the like exc 10cm but not exc 20cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer instructions and remove old thermo plastic road paint marking as per ground requirement complete all as specified and directed by Engr-in-charges. |
| 13 | M&L for machine cut Jodhpur sand stones as in edging of road side of size 30cm x 7.5cm (HxT) jointed in CM (1:6) and struck flush including necessary excavation and demolition of old complete all as specified and directed by Engr-in-charge. Note:- Each stone shall not be less than 45cm in length except where required as closer or on curve. |
| 14 | S&F in repair solar powered Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed by Engr-in-charges. |
| 15 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm thick with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable sizeas per manufactures instructions. as per sample kept in GEs office complete all as specified and directed by Engr-in-charges. |
| 16 | S&F in repair for 900mm dia reflective safety traffic mirror for road and side walk of stainless steel face, 0.90 mm thick large radius of curvature for minimum distance distrotation orange powder coated steel back and hood orange vinyl extrusion with 75 mm clamp brackets for pole mouting complete all as specified and directed by Engr-in-charges. |
| 17 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-charges. |
| 18 | Supply and fixing metal tubular Solar delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-charges. |
| 19 | M&L for 100mm consolidated thick Moorum/ red bajri filling, laying, spread, including watering, rolling and consolidated to required gradient as in road berms complete all as specified and directed by Engr-in-charges. |
| 20 | S&F of stainless steel sign board with pvc/ acralic sheet size (1200mm x 900mm) height 2.10mtr min including all writing aero signs, all stainless steel members including excavation, RFR, Removal and embedding in PCC 1:2:4 (300x 300x750mm) type B1 for poles complete all as specified and directed by Engr-in-charges. |
| 21 | Demolition of cement concrete in ground floors and pavings n.exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge. |
| 22 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub-base, flooring, path, foundation etc complete all as specified and directed by Engr-in-charge. |
| 23 | Supply and laying machine pressed factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-charge. |
| 24 | Supply and laying factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engr-in-charge. |
| 25 | S&F for Yellow and black plastic speed bum made up of ABS materials to highly reflective reflector moulded in EMMA materials welded with ABS base plate through Ultrasonic welding processes of size 350mm length and width of 263mm with working width of 250mm, height 53mm and weight appx 1200gms. complete all as specified and directed by Engr-in-charge. |
| 26 | M&L for newly stone or concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-charge Please Enable Macros to View BoQ information |
