|
| 1 | Clearing and grubbing road land including uprooting wild vegetation,gross, bushes srubs, shaplings and tree of gurt upto 300mm, removal of stumps of such trees cut earlier and desposiol of un survecable material and stacking of servicable material to be used are auctioned,upto a lead of 1000m including removal and desposial of top organic soil not exceeding 150mm in thickness as per technical specification clause 201, non thourny jungle.(by mechanical means) |
| 2 | Earth work in embankment mechanically completed to 98% procter density in ordinary soil ,excavation to be in the form of regular pits not exceeding 1/2 meter C 20'' in depth an earth work in embankment to be in 20cm layers including ramming and dressing the surface requird levels and slopes in also including 1.5m lift ans 30m lead. The earth rom cutting to be used in making embankment are to be deposited as spoil banks with in 30m distance as directed by engineering incharge as per P.W.D schedule N.S.20-3 |
| 3 | Providing laying, spreading and compacting stone aggregates of specific sizes 22.4-53 mm gauge to water bound macadam specification including spreading in uniform thichness hand packing, rolling with smooth wheel roller 80-100 KN static roller in stages to proper grade & camber applying and brooming stone screening binding material to fill up the intertices of the coarse aggregates watering and compacting to the required density grading-3 as per technical specification class 405. WBM GR-III |
| 4 | Earth work in embankment mechanically completed to 98% procter density in ordinary soil ,excavation to be in the form of regular pits not exceeding 1/2 meter C 20'' in depth an earth work in embankment to be in 20cm layers including ramming and dressing the surface requird levels and slopes in also including 1.5m lift ans 30m lead. The earth rom cutting to be used in making embankment are to be deposited as spoil banks with in 30m distance as directed by engineering incharge as per P.W.D schedule N.S.20-3 |
| 5 | Providing and laying in position cement concrete 1:3:6 (1 Cement: 3 coarse sand (zone-lI): 6 graded stone aggregate 40 mm (nominal size) of specified grade excluding the cost of centering and shutteing - All work up to plinth level |
| 6 | Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 7 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,(Without Dowel Bar) using curing compound (where specified) and water finishing to lines and grade as per drawing and As per MORD Specification. Clause 1500 Please Enable Macros to View BoQ information |
