|
| 1 | Dismantling and removing brick or stone masonry in Cement mortar or lime including stacking the useful materials for re-use and removing the debris within 50m lead etc. complete as per direction of Engineer-in-Charge. |
| 2 | Earthwork in excavation of foundation in Hard Soil within 50m initial lead and 1.5m, initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge (Excavation up to 1.5m height) |
| 3 | Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additional Charges, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 4 | Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 4 cm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, DMF, EMF, Additional Charges, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge. |
| 5 | Providing and laying plain cement concrete (1:2:4) in superstructure using 12 mm size hard crusher broken granite chips of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes, cess,royalties, DMF, EMF, Additional Charges, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge. |
| 6 | Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties, DMF, EMF, Additional Charges and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge. |
| 7 | Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additional Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 8 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties, DMF, EMF, Additional Charges and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 9 | Supplying, Fitting & Fixing M.S. Grill, Grills gates, MS gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of MS Square bar / flat including stair case hand railing with 40mm dia GI pipe etc. including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.Ground Floor |
| 10 | Providing supplying, fitting, fixing of Cheqered tiles of 25mm thick on floors on 20mm thick bed of C.M (1:4) (1 cement : 4 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tile including cost, conveyance, royalty, DMF, EMF, Additional Charges and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 11 | Priming one coat of primer to wall surface with any approved shade (Water Bond Cement Primer) including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 12 | Painting two coats with Synthetic enamel paint of approved quality and shade over a coat of primer (Red Oxide Primer) on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge.Ground Floor |
| 13 | Finishing wall surface with painting two coats with Weather coat paint (1st quality) exterior grade over a coat of Cement Primer (Water based) of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor |
| 14 | Structural Steel Work riveted, bolted or welded in built up section, trusses and framed work including cutting, hoisting fixing in position and applying a primer coat of approved steel primer etc. complete as per direction of Engineer-in-charge. |
| 15 | Providing, fitting , fixing of GCI Colour sheets in roofing including drilling holes in wind ties and fixing with 'J' or 'L' hooks. fixing of ridges, valleys, wind ties etc. including cost, conveyance of all materials and labour, T&P etc as required for the work complete as per the direction of Engineer-in- Charge. |
| 16 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per specification & direction of the Engineer-in-charge.a) All Floor |
| 17 | Supplying, fitting and fixing of Aluminium Composite Panel (ACP) incluidng cost, conveyance and taxes of all materials and labour (T&P) require for the work etc. complete as per the direction of Engineer-in-Charge. |
| 18 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge Please Enable Macros to View BoQ information |