|
| 1 | Dismantling and removing 2.5Cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debris away from the work site with all leads and lifts and all labour with T & P required for the work etc. complete in all respect as directed by the Engineer-In-Charge. |
| 2 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris with all leads and lifts and all labour T & P required for the work etc. complete in all respects. |
| 3 | 16mm.(5/8 Inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T & P required for the work etc. complete in all respect in all floors. |
| 4 | Supplying, fitting and fixing of vetrified tiles of 600 mm x 600 mm Non-Skid Matt Finish in floors, treads or steps of approved make, quality and colour without any warpage laid over an under layer of 20mm thick base of Cement mortar (1:4) cement and sand including cutting to size, cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge. |
| 5 | Providing, fitting & fixing of Vetrified tiles of approved quality in dados, skirting and rises of steps on cement plaster 1:3 (1 Cement : 3 Sand) jointed with neat cement slurry mixed with pigment to match the slabs of the tiles including rubbing, polishing with cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge. |
| 6 | Providing Scraping Old Paint with Scrapers & Sand Papering and Washing with soap or soda upto 5 mtr. Height etc. complete including cost of all materials & labour taxes T&P etc. complete in all respect. |
| 7 | Finishing wall surfaces with acrylic wall putty (water based) of approved make and finished smooth to receive painting including cost of scaffolding, staging charges with cost & conveyance of all materials taxes labour T & P etc complete as directed by Engineer-In-Charges. |
| 8 | Priming one coat to wall surface using water bound cement primer including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect. |
| 9 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give and even shade including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect. |
| 10 | Priming one coat with any approved paint over a coat of red oxide steel surface including cost, conveyance, royalities and taxes of all materials and labour with T&P required for the work in all floors including cost of paint and primer etc. complete. |
| 11 | Providing enamel painting two coat over a coat of primer to wood or iron work including cost, conveyance, taxes of all materials, cost of all labour with T & P etc required for the work etc complete in all respect as directed by the Engineer in charge. |
| 12 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Window with top fixed - 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement of Window Sash Profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. Confirming to ASTM D 638-14, EN-477-95 and other applicable standards. |
| 13 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door Sash Profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. Confirming to ASTM D 638-14, EN-477-95 and other applicable standards. |
| 14 | Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mmx600mmx16mm of approved design and quality complete with frame and all fitting and fixtures including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect as per direction of the Engineer-In-Charge. |
| 15 | Supplying, fitting and fixing of 19mm thick BWR Block board with 6 mm thick BWR Ply at front & 4mm thick Veneer pasted with adhesive to inner & outer surface including cost, conveyance of all materials, labour & all fitting and fixtures etc. complete excluding GST work complete per direction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
