|
| 1 | Earth work in all kind soil within 50 m. initial lead and 1.5 m initial lift including ressing & breading clods to omaximum 5cm to 7cm & laying in layers not exceding 0.3 M in depth & as per direction of the Engineer-in-charge. |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam grade-II including premixing the materials with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (5th Revision.) |
| 3 | Filling in foundation & plinth with sand watered and ramed including cost of all material etc complete. |
| 4 | Cement concrete of proportion (1:4:8) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers not exceeding 9”thick to the required level |
| 5 | R.C.C./C.C work of M-20 grade using 20mm & down graded hard black granite chips of approved quality and from approved quarry including hoisting lowering, laying and compacting concrete watering, curing for four weeks and finished the exposed surface smooth |
| 6 | Rigid and smooth centering and shutteringfor R.C.C. works including false works and dismantling them after casting including cost of materials complete |
| 7 | Foundation & Plinth |
| 8 | RCC wall & fins including attached pillar |
| 9 | Column |
| 10 | Lintel |
| 11 | Supply, cutting, bending and placing in position HYSD bar reinforcement complete as per specification including cost of materials. |
| 12 | Brick work with Fly Ash bricks 23 cmx11 cmx8 cm size having crushing strength not less than 75 kg./cm² with dimensional tolerance ± 2 percent in cement mortar (1:6) in F&P including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of Engineer-in-charge. |
| 13 | Brick work with Fly Ash bricks 23 cmx11 cmx8 cm size having crushing strength not less than 75 kg./cm² with dimensional tolerance ± 2 percent in cement mortar (1:6) in Superstructure including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all |
| 14 | 2.5cm. Damp proof course with cement concrete (1:2:4) |
| 15 | 16mm thick cement plaster (1:6) over brick or stone masonary including punning. |
| 16 | 6 mm thick cement plaster in CM (1:4) To smooth R.C.C. Surface |
| 17 | 12mm. Thick cement plaster (1:6) for brick work. |
| 18 | 16mm. Thick cement plaster (1:6) over brick or stone masonary. |
| 19 | Providing & laying factory made cement concrete paver block of 60mm thick and M-30 grade of concrete of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc, complete |
| 20 | Filling foundation and plinth with excavated Earth inluding watering and ramming |
| 21 | Excavated material away from work site within 5 km lead |
| 22 | Wall painting Two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint with primer one coat. |
| 23 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 24 | Finishing wall surface with Acrylic wall putty (water based) |
| 25 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles compelte including cost of ceramic floor tiles with approved shade |
| 26 | Fixing tiles in dados skiring and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including cost of ceramic wall tiles of approved shade |
| 27 | Supplying, fitting and fixing of M.S. grill gate,door with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 28 | Supplying all materials, labour T&P and fixing of fabricated M.S door, windows & grill in wall including cutting of brick masonary wall, fixing of door, windows, grill by providing C.C ( 1:2:4 ), Plastering to the damaged portion |
| 29 | Supplying and Fixing rolling shutters of approved make, made of required size M.S laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guide and arrangement for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire adequate strength conforming to IS;4454-part-1 and M.S top cover of required thickness for rolling shutters. |
| 30 | Providing and fixing ball bearing for rolling shutters. |
| 31 | Painting two coat to wood and ironwork in any approved shade including cost , conveyance, taxes of all materials, labour T & P required for the work including one coat primer |
| 32 | Supplying & stacking good earth at site including royalty and transporting etc complete from 5km lead as per direction of E-I-C. |
| 33 | Sinage |
| 34 | Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap to the floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. Procelain EWC with P-trap |
| 35 | Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with a pair of cast iron or M.S. brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification10 litre low level cistern with fittings - White. |
| 36 | Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.Porcelain Counter top Basin Oval Shape( 450x400) |
| 37 | Providing & Fixing C.P. Health faucet (Spray wash) of approved quality( a) C.P. Health Faucet with 1.0 mtr. PVC Tube |
| 38 | Supplying & Fixing 32mm dia flush bend for low level flushing cistern upto 1.00 mtr. Height 32mm dia PVC long Flush bend |
| 39 | Providing & Fixing PVC waste pipe for Sink or Wash basin including PVC waste fitting 32mmx1150mm Corrugated long PVC waste pipe |
| 40 | Supplying all materials, labour , T&P and fitting & fixing UPVC SWR pipes( Type- A of the following outside diameter confirming to IS: 13592/1992 including jointing with rubber lubricant by non heat application method including testing etc, all complete 110mm OD P.V.C. SWR Single Socket Pipe ( ISI- Type-A) |
| 41 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes including jointing with seal ring , leaving 10 mm gap for thermal expansion. |
| 42 | P.V.C. SWR plain bend 87.5° |
| 43 | PVC Vent Cowl |
| 44 | P.V.C SWR Single Junction (Tee) without Door |
| 45 | Coupler |
| 46 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized CPVC pipes conforming to ( (As per IS: 15778:2007) SDR 11 the following nominal diameter with fittings and clamps including testing as per specification all complete. |
| 47 | 15mm nominal dia pipes |
| 48 | 25mm nominal dia pipes |
| 49 | Providing and fixing 15 mm nominal bore C.P. brass short body bib cock of approved quality |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass Long body bib cock of approved quality |
| 51 | Providing & Fixing 15mm dia C.P. pillar cock of approved Quality |
| 52 | Providing and fixing uplasticised PVC connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15mm nominal bore - 60cm length |
| 53 | Providing and placing on terrace polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification and direction of the E-I-C.. |
| 54 | Supplying, fitting & fixing bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or Plywood sheet and fixed to wooden plugs with chromium plated brass scrrews and washers all complete as per specification (a)Rectangular shape 453x357 mm |
| 55 | Fixing standard sized chromium plated brass soap holder/dish complete with chromium plated brass brackets fixed to wooden plugs with CP brass screws complete as per specification |
| 56 | Providing and fixing solid plastic seat with lid for pedestral type W.C pan complete: White solid plastic seat with lid |
| 57 | Display board Please Enable Macros to View BoQ information |
